🔧 Config adjustments

MarlinFirmware · Sep 5, 2024 · 83cbed8 · 83cbed8
1 parent d36d9cb
commit 83cbed8
Show file tree

Hide file tree

Showing 2 changed files with 24 additions and 11 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -1679,8 +1679,8 @@
  * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
  * Only integer values >= 1 are valid here.
  *
- * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
- *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
+ * Example: 'M851 Z-5' with a CLEARANCE of 4  =>  9mm from bed to nozzle.
+ *     But: 'M851 Z+1' with a CLEARANCE of 2  =>  2mm from bed to nozzle.
  */
 #define Z_CLEARANCE_DEPLOY_PROBE   10 // (mm) Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // (mm) Z Clearance between probe points

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -1082,9 +1082,11 @@
   #define HOME_AFTER_G34
 #endif
 
-//
-// Add the G35 command to read bed corners to help adjust screws. Requires a bed probe.
-//
+/**
+ * Assisted Tramming
+ *
+ * Add the G35 command to measure bed corners and help adjust screws. Requires a bed probe.
+ */
 //#define ASSISTED_TRAMMING
 #if ENABLED(ASSISTED_TRAMMING)
 
@@ -1117,7 +1119,7 @@
 // @section motion control
 
 /**
- * Fixed-time-based Motion Control -- EXPERIMENTAL
+ * Fixed-time-based Motion Control -- BETA FEATURE
  * Enable/disable and set parameters with G-code M493.
  * See ft_types.h for named values used by FTM options.
  */
@@ -1181,7 +1183,7 @@
 #endif
 
 /**
- * Input Shaping -- EXPERIMENTAL
+ * Input Shaping
  *
  * Zero Vibration (ZV) Input Shaping for X and/or Y movements.
  *
@@ -1490,8 +1492,17 @@
   #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
 #endif
 
+/**
+ * Probe Offset Wizard
+ * Add a Probe Z Offset calibration option to the LCD menu.
+ * Use this helper to get a perfect 'M851 Z' probe offset.
+ * When launched this powerful wizard:
+ *  - Measures the bed height at the configured position with the probe.
+ *  - Moves the nozzle to the same position for a "paper" measurement.
+ *  - The difference is used to set the probe Z offset.
+ */
 #if HAS_BED_PROBE && ANY(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
-  //#define PROBE_OFFSET_WIZARD       // Add a Probe Z Offset calibration option to the LCD menu
+  //#define PROBE_OFFSET_WIZARD
   #if ENABLED(PROBE_OFFSET_WIZARD)
     /**
      * Enable to init the Probe Z-Offset when starting the Wizard.
@@ -1508,6 +1519,10 @@
 #if HAS_MARLINUI_MENU
 
   #if HAS_BED_PROBE
+
+    // Show Deploy / Stow Probe options in the Motion menu.
+    #define PROBE_DEPLOY_STOW_MENU
+
     // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
     //#define X_AXIS_TWIST_COMPENSATION
     #if ENABLED(X_AXIS_TWIST_COMPENSATION)
@@ -1522,8 +1537,6 @@
       #define XATC_Z_OFFSETS { 0, 0, 0 }    // Z offsets for X axis sample points
     #endif
 
-    // Show Deploy / Stow Probe options in the Motion menu.
-    #define PROBE_DEPLOY_STOW_MENU
   #endif
 
   // Include a page of printer information in the LCD Main Menu
@@ -2708,7 +2721,7 @@
 
 /**
  * Set the number of proportional font spaces required to fill up a typical character space.
- * This can help to better align the output of commands like `G29 O` Mesh Output.
+ * This can help to better align the output of commands like 'G29 O' Mesh Output.
  *
  * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
  * Otherwise, adjust according to your client and font.