Update Manta E3 EZ with Ender-3 V2 LCD custom wiring header

Use Manta E3 EZ TFT port for DWIN TX/RX. Works with default LCD_SERIAL_PORT 3 set in Conditionals_adv.h
MarlinFirmware · Jun 13, 2023 · 83f3533 · 83f3533
1 parent 1726ba5
commit 83f3533
Showing 1 changed file with 13 additions and 12 deletions.
diff --git a/Marlin/src/pins/stm32g0/pins_BTT_MANTA_E3_EZ_V1_0.h b/Marlin/src/pins/stm32g0/pins_BTT_MANTA_E3_EZ_V1_0.h
@@ -238,21 +238,23 @@
 #define EXP1_10_PIN                         -1
 
 #if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
+  /**
+   *              ------                   ------            ---
+   *  (PC1) BEEP | 1  2 |                 | 1  2 |          | 1 |    (5V)
+   *             | 3  4 |              RX | 3  4 | TX       | 2 |    (GND)
+   *  (PC0)  ENT   5  6 |             ENT   5  6 | BEEP     | 3 | RX (PD8)
+   *  (PA2)    B | 7  8 | A  (PA1)      B | 7  8 | A        | 4 | TX (PD9)
+   *         GND | 9 10 | 5V          GND | 9 10 | VCC      | 5 |    (RST)
+   *              ------                   ------            ---
+   *               EXP1                     DWIN             TFT
+   *
+   * DWIN pins are labeled as printed on DWIN PCB. GND, VCC, A, B, ENT & BEEP can be connected in the same orientation as the
+   * existing plug/DWIN to EXP1. DWIN TX/RX need to be connected to the Manta E3 EZ's TFT port, with DWIN TX->PD9, DWIN RX->PD8.
+   */
   #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
     #error "CAUTION! Ender-3 V2 display requires a custom cable with TX = PA0, RX = PC2. See 'pins_BTT_MANTA_E3_EZ_V1_0.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
   #endif
 
- /**
-  *            Ender-3 V2 display                        Manta E3 EZ V1.0               Ender-3 V2 display --> Manta E3 EZ V1.0
-  *                  ------                                   ------                                 RX  3 -->  5  P0_15
-  *             --  | 1  2 | --                (BEEPER)  PC1 | 1  2 | PC2  (BTN_ENC)                 TX  4 -->  9  P0_16
-  * (MANTA TX1) RX  | 3  4 | TX (MANTA RX1)    (BTN_EN1) PC3 | 3  4 | RESET                      BEEPER  6 --> 10  P2_08
-  *   (BTN_ENC) ENT   5  6 | BEEPER            (BTN_EN2) PC0   5  6 | PA0  (LCD_D4)
-  *   (BTN_E2)  B   | 7  8 | A  (BTN_E1)       (LCD_RS)  PA2 | 7  8 | PA1  (LCD_EN)
-  *             GND | 9 10 | 5V                          GND | 9 10 | 5V
-  *                  ------                                   ------
-  */
-
   #define BEEPER_PIN                 EXP1_01_PIN
   #define BTN_EN1                    EXP1_08_PIN
   #define BTN_EN2                    EXP1_07_PIN
@@ -310,7 +312,6 @@
 //
 // SD Support
 //
-
 #ifndef SDCARD_CONNECTION
   #define SDCARD_CONNECTION              ONBOARD
 #endif