Issues in firmware?

[krom7]

3D printer has been transformed into CNC. Firmware Marlin was partially changed:
The axes to change the values ​​of the minimum to maximum value . CNC work , but with the memory card hangs . By USB and Bluetooth works well , but if a long time to connect to the card - just freezes . Video:
https://www.youtube.com/watch?v=wQNvgGxlw0U
Possible bug in the firmware ?

[brainscan]

That video is over a year old and says the problem is solved. Have you used the correct link?

Sent from my iPhone

On 23 Jul 2016, at 20:47, krom7 <[email protected]mailto:[email protected]> wrote:

3D printer has been transformed into CNC. Firmware Marlin was partially changed:
The axes to change the values ??of the minimum to maximum value . CNC work , but with the memory card hangs . By USB and Bluetooth works well , but if a long time to connect to the card - just freezes . Video:
https://www.youtube.com/watch?v=wQNvgGxlw0U
Possible bug in the firmware ?

You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHubhttps://github.com//issues/4386, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ACHemGiDorz9TddVEX4XAsB0rH42Kurgks5qYm-ygaJpZM4JTbdA.

[jbrazio]

We do not [yet] officially support any CNC implementations of Marlin.
The example video you show is from 2015, I advise to test with the latest RCbugfix, but this means you'll have to port back any custom changes.

[thinkyhead]

@krom7 I see you just signed up today. Welcome to Github!

[krom7]

Thanks for answering.
Roller author writes the problem is solved , but it is not.
After some time the problem arose again .
This may not be due to the firmware ?

2016-07-24 1:42 GMT+04:00 brainscan [email protected]:

That video is over a year old and says the problem is solved. Have you
used the correct link?

Sent from my iPhone

On 23 Jul 2016, at 20:47, krom7 <[email protected]<mailto:
[email protected]>> wrote:

3D printer has been transformed into CNC. Firmware Marlin was partially
changed:
The axes to change the values ??of the minimum to maximum value . CNC work
, but with the memory card hangs . By USB and Bluetooth works well , but if
a long time to connect to the card - just freezes . Video:
https://www.youtube.com/watch?v=wQNvgGxlw0U
Possible bug in the firmware ?

You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub<
https://github.com/MarlinFirmware/Marlin/issues/4386>, or mute the thread<
https://github.com/notifications/unsubscribe-auth/ACHemGiDorz9TddVEX4XAsB0rH42Kurgks5qYm-ygaJpZM4JTbdA

.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
#4386 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/ATqV-tVd1cBb7xy9EWN2-yigjfj8OF6Yks5qYorLgaJpZM4JTbdA
.

[thinkyhead]

It might be a bug in the firmware, but unfortunately we have moved forward and are not patching older versions of Marlin. So I suggest trying to upgrade to a newer version of Marlin as a starting-point, then make the same general CNC modifications that were made to whatever version of Marlin that your machine's firmware is based on. To get started on moving to newer code, please join in the discussion at #3208. Perhaps one of the enthusiastic modders there can help point you in the right direction.

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.