Updated pin description for MKS BASE V1.6 #16806
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
Note that these pins from #define CASE_LIGHT_PIN 2
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 2 // Hardware PWM (X_MAX_PIN)
#define SPINDLE_LASER_ENA_PIN 15 // Pullup! (Y_MAX_PIN)
#define SPINDLE_DIR_PIN 19 // (Z_MAX_PIN)
#include "pins_RAMPS.h"So, if the board has unused endstop pins, those can be repurposed for a laser or a case light. If these pins are copacetic with 1.6, as they are with previous versions of MKS BASE, then we can replace |
|
@thinkyhead If if was up to me, actually I would keep clean pin definitions for boards, without any "alternative" features, best solution in my opinion should be introducing 3rd configuration file "configuration_pins.h" where anyone could define all pin modifications against standard board. |
thinkyhead
force-pushed
the
mks-base-16-pinout-update
branch
from
0d52ece
to
afce615
Compare
Whoever brings us a fully reformed and improved system for pins, HALs, and configurations will be carried through the streets as a hero. I only wish I had the time for another big refactor, but at the moment we're busy trying to get STM32 and TMC drivers solid, clearing up extant bugs, improving the UI, and writing a configuration tool. |
That is rather a big tasks and as there is no money for it I can only help you from time to time with small things, especially ones that affects my printers. |
Drat! What we really need is some interns. |
|
@thinkyhead |
StJa
added a commit
to StJa/Marlin
that referenced
this pull request
Mar 9, 2020
* Add sanity-check for new Advanced Pause option Followup to MarlinFirmware#16372 * Include macros for delta ABC * Update Russian language (MarlinFirmware#16745) * Fix BTT SKR 1.4 extra endstop pins (MarlinFirmware#16738) * Option for Trigorilla 1.4 with add-on endstops board (MarlinFirmware#16737) * Consistent M112 with Emergency Parser (MarlinFirmware#16747) * Improve mfadd helper script - Use the original branch name if none is supplied - Set the remote tracking to the source - Accept User/Branch or User:Branch syntax * Clean up i2c encoder, sanitize serial * Misc cleanup, whitespace * Encapsulate probe as singleton class (MarlinFirmware#16751) * G34 automatic point assignment (MarlinFirmware#16473) * Fix Temperature::over_autostart_threshold (MarlinFirmware#16749) * Update Russian language (MarlinFirmware#16750) * Fix CURRENT_STEP_DOWN compile error * Drop obsolete SD special char handling See MarlinFirmware#14035 * Probe singleton patch Followup to MarlinFirmware#16751 * Fix RGB / Neopixel white color bug See MarlinFirmware#16752 * Suppress a compile warning * More 8-extruder fixups * Add EXP labels to SKR pins * Fix LPC build with USE_WATCHDOG off * Minor string storage optimization * Apply REPEAT, RREPEAT, and loop macros (MarlinFirmware#16757) * Revert breaking change to _FAN_PWM macro * Add Z_AFTER_HOMING to raise Z more in G28 (MarlinFirmware#16755) * Corner Leveling: Add inset for each side (MarlinFirmware#16759) * (c) 2020 * Tweak mfqp script * Use a different Configurations branch for CI * Fix LCD Z Move character LCD display line (MarlinFirmware#16772) * Fix warning for ESP32 (MarlinFirmware#16771) * [cron] Bump distribution date * Force T0 in UBL G29 on all multi-hotend setups (MarlinFirmware#16774) * Keep secure credentials in a separate config file (MarlinFirmware#16773) * STM32duino - Use SDIO for onboard SD (MarlinFirmware#16756) * Fix E stepper stays on bug Fixes MarlinFirmware#16753 * Fix Arduino IDE compile for DUE Fixes MarlinFirmware#16767 * Fix CALIBRATION_GCODE pin handling * Upgrade an ifdef * More updates for 8 extruders, REPEAT * [cron] Bump distribution date (2020-02-05) * Add MKS Base 1.6 board (MarlinFirmware#16783) * Direct download link for configs * [cron] Bump distribution date (2020-02-06) * Split up MKS_RUMBA32 into two variants (MarlinFirmware#16781) * G26: Allow to set retraction for UBL mesh test (MarlinFirmware#16511) * Remove extraneous Serial init (MarlinFirmware#16794) * Fix probe with multi-endstops (MarlinFirmware#16793) * [cron] Bump distribution date (2020-02-07) * [cron] Bump distribution date (2020-02-08) * Clean up Makefle indentation * Add .editorconfig file * Tweak ABL logging, document probing * [cron] Bump distribution date (2020-02-09) * Coolstep for TMC2130, 2209, 5130, 5160 (MarlinFirmware#16790) * Better probe fail handling (MarlinFirmware#16811) * Adafruit Grand Central M4 fixes (MarlinFirmware#16812) * Minor HAL cleanup * Move MSG_MARLIN * Show print time with PRINTER_EVENT_LEDS * Tweak parser warning * Bump config version to 020004 (MarlinFirmware#16816) * Add PID, probe offsets to ExtUI (MarlinFirmware#16792) * [cron] Bump distribution date (2020-02-10) * Tweak LPC1768 upload py script * Add mftest -b (auto-build) and -u (upload) - Implement the equivalent of auto-build for the shell environment by using the MOTHERBOARD setting to look up the env: entries. * Revert change to AXIS_DRIVER_TYPE_X2 - Revisit this to figure out why it breaks * Revert "Coolstep for TMC2130, 2209, 5130, 5160" Reverting MarlinFirmware#16790 as not ready for primetime. * Add a caution to drivers.h * Update MKS BASE and v1.6 pins (MarlinFirmware#16806) * Add g-code quoted strings, improve stream code (MarlinFirmware#16818) * Fix out-of-order M0 after SD printing Fixes MarlinFirmware#14774 Co-Authored-By: tol2cj <[email protected]> * Fix out-of-order M0 after SD printing Fixes MarlinFirmware#14774 Co-Authored-By: tol2cj <[email protected]> * Enable hotend / bed PID separately in ExtUI (MarlinFirmware#16827) * Fix MKS Robin Nano platformio.ini entry (MarlinFirmware#16826) * Unify step pulse timing of ISR / babystep (MarlinFirmware#16813) * [cron] Bump distribution date (2020-02-11) * Update SAMD51 EEPROM repo link (MarlinFirmware#16832) * Undo driver type auto-assignment for now Good general concept but needs more time to develop and group with a stepper suite. * No Z sensorless req'd if homing with probe Fixes MarlinFirmware#16674 * Recommend Z Safe Homing Co-Authored-By: Vertabreaker <[email protected]> * Use prior babystep delay method (MarlinFirmware#16833) * Function-style critical section macros * Fix up tests * Simplify old safe homing sanity check * Prevent pin glitches on out commutation (MarlinFirmware#16835) Better for switching from pulled input to output and also set real output (with no input enabled). * [cron] Bump distribution date (2020-02-12) * Define MarlinSerial instances for DGUS (MarlinFirmware#16841) * No limit needed on this raise Remove an extraneous limit from MarlinFirmware#16811. * [cron] Bump distribution date (2020-02-13) * [cron] Bump distribution date (2020-02-14) * Fix G-code line parsing (MarlinFirmware#16840) * Ping the job timer in M140 (MarlinFirmware#16849) * Remove unused queue.stopped_N (MarlinFirmware#16850) * Don't assert safe homing for delta/scara * Fix ESP32 warning, specify supported version * Add ESPAsyncTCP to lib_ignore (MarlinFirmware#16844) * Add RAMPS 1.4.4 to AGCM4 (MarlinFirmware#16606) * Clean up host actions code (MarlinFirmware#16856) * Optimize "Dismiss" string * Clean up stepper and babystep (MarlinFirmware#16857) * Fysetc S6 pins / LCD updates (MarlinFirmware#16830) * [cron] Bump distribution date (2020-02-15) * Fix mftest -b and -u. Add --help. * Fix a BORG compile warning * Fix byte-to-percent display Fixes MarlinFirmware#16866 * Conceal float rounding errors on display Fix MarlinFirmware#16866 * [cron] Bump distribution date (2020-02-16) * Double ADC read frequency (MarlinFirmware#16864) * EXPERIMENTAL integrated BABYSTEPPING (MarlinFirmware#16829) * Show '*' for zero 'stst' flag * Require TMCStepper 0.6.2 * Defer updated ADC * Move SAMD51 Temperature timer to RTC (MarlinFirmware#16868) * Fix unknown command on empty lines (MarlinFirmware#16867) * Fix mftest -b -u line match * Update French language (MarlinFirmware#16877) * Put ESP32 I2S stepper task and Marlin on the same core (MarlinFirmware#16874) * Fix babystep include, typos in stepper.cpp Fix MarlinFirmware#16881 * [cron] Bump distribution date (2020-02-17) * [cron] Bump distribution date (2020-02-18) * [cron] Bump distribution date (2020-02-19) * [cron] Bump distribution date (2020-02-20) * Serial redirect for Move Command when stopping (MarlinFirmware#16906) * [cron] Bump distribution date (2020-02-21) * Single envs for specific boards * Inline manage_inactivity, tweak autoreport_paused * Function for CONFIG_ECHO_HEADING * Show end prompt with Print Event LEDs * Add a note on EEPROM todo * Tweak process_line_done for speed * More EEPROM cleanup * Followup to autoreport patch (MarlinFirmware#16914) See a1f026f * Disable spreadcycle in tmc_enable_stallguard<2209> (MarlinFirmware#16890) * Fix EEPROM errors with EXTRUDERS == 0 (MarlinFirmware#16898) * Add PICA shields support (MarlinFirmware#16891) * Tweak pins spacing, comments * Version 2.0.4 Release * [cron] Bump distribution date (2020-02-22) * Use moves_free in ok_to_send * Hotfix for Babystepping * CoreXY Babystepping hotfix * Use moves_free in ok_to_send * [cron] Bump distribution date (2020-02-22) * Hotfix for Babystepping * [ESP32] Allow user to define pins for hardware Serial1 and Serial2 (MarlinFirmware#16918) * CoreXY Babystepping hotfix * Version 2.0.4.1 Release * [cron] Bump distribution date (2020-02-23) * Finish Custom User Menu sanity-check (MarlinFirmware#16917) * Followup to babystep hotfix * Fix M0/M1 broken wait loop (MarlinFirmware#16921) * Define ANET_FULL_GRAPHICS_LCD pins for SKR 1.4 (MarlinFirmware#16928) * Version 2.0.4.2 Release * Suppress "packed member" warning * Suppress "packed member" warning * Commit last SD line before fileHasFinished * Allow LCD_PIXEL_WIDTH/HEIGHT override * Allow USE_GCODE_SUBCODES for debugging * Sync Italian language (MarlinFirmware#16935) * Reduce default TMC baudrate to 57600 with Software Serial (MarlinFirmware#16930) * [cron] Bump distribution date (2020-02-24) * Fix AXIS_HAS_SW_SERIAL * Simplified E_AXIS_HAS macro * "Init. Media" => "Attach Media" * Fix Babystepping loop (again) * BS_TOTAL_AXIS => BS_TOTAL_IND * Allow Z_SAFE_HOMING_POINT outside bed (MarlinFirmware#16945) * Restore tabs in Makefile (MarlinFirmware#16944) * Fix card_eof error * Version 2.0.4.3 Release * Allow Z_SAFE_HOMING_POINT outside bed (MarlinFirmware#16945) * Restore tabs in Makefile (MarlinFirmware#16944) * Fix card_eof error * [cron] Bump distribution date (2020-02-25) * Update POWER_LOSS_PIN comment (MarlinFirmware#16957) * Update Italian language (MarlinFirmware#16947) * Fix LCD cutter/bed icons overlapping (MarlinFirmware#16956) * Fix SKR 1.4 Turbo SD_DETECT_PIN (MarlinFirmware#16955) * Fix the wait loop in M0 / M1 * [cron] Bump distribution date (2020-02-26) * Ensure proper SD print completion (MarlinFirmware#16967) * HAS_SDCARD_CONNECTION is more obsolete * Fix GTR10 overlapping defines (MarlinFirmware#16976) * Toolchange improvements (MarlinFirmware#16979) * Language: "failsafe" => "Defaults" * Use a STR_ prefix for non-translated strings * Set LCD status for EEPROM errors (MarlinFirmware#16977) * More serial strings * Add LPC1768 Serial ports for pinsDebug (MarlinFirmware#16980) * Correct SKR expansion port pins (MarlinFirmware#16974) * String optimize followup * Fix Trinamic pulse rate auto-assignment (MarlinFirmware#16966) * Allow weird probe values in G33 * Serial strings in macros * Sanity check for LPC serial pin conflict (MarlinFirmware#16981) * Allow servo features in combination (MarlinFirmware#16960) * Add TRAVEL_EXTRA_XYJERK option See MarlinFirmware#16949 Co-Authored-By: josedpedroso <[email protected]> * Quick-homing sensorless back-off (MarlinFirmware#16872) * Prevent park_point compile error * More extra travel jerk changes Co-Authored-By: josedpedroso <[email protected]> * Fix unified status bed temp display * Allow print recovery after parking * Case-insensitive g-code option (MarlinFirmware#16932) * Define DIAG pins for MKS SGen-L * Handle print completed LED event in M0 * [cron] Bump distribution date (2020-02-27) * Fix planner.cpp compile (MarlinFirmware#16996) * Update Slovak language (MarlinFirmware#17002) * Version 2.0.4.4 Release Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Acenotass <[email protected]> Co-authored-by: rebel1 <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: InsanityAutomation <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: felixstorm <[email protected]> Co-authored-by: Bob Kuhn <[email protected]> Co-authored-by: thisiskeithb <[email protected]> Co-authored-by: Tanguy Pruvot <[email protected]> Co-authored-by: Robby Candra <[email protected]> Co-authored-by: Robert Stein <[email protected]> Co-authored-by: Fabio Santos <[email protected]> Co-authored-by: Giuliano Zaro <[email protected]> Co-authored-by: Daniel Mazurkiewicz <[email protected]> Co-authored-by: tol2cj <[email protected]> Co-authored-by: proferabg <[email protected]> Co-authored-by: darksiah <[email protected]> Co-authored-by: Vertabreaker <[email protected]> Co-authored-by: Gaston Dombiak <[email protected]> Co-authored-by: vivian-ng <[email protected]> Co-authored-by: George Fu <[email protected]> Co-authored-by: Karl Andersson <[email protected]> Co-authored-by: Jamie <[email protected]> Co-authored-by: ZMiguel Alves <[email protected]> Co-authored-by: Marcio T <[email protected]> Co-authored-by: josedpedroso <[email protected]> Co-authored-by: Makoto Schoppert <[email protected]> Co-authored-by: Roman Moravčík <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
Pinout description for MKS BASE 1.6 updated
Benefits
Better pinout description
Related Issues
#16783