Merge pull request #2 from MartynKeigher/develop

Cicso & Compaq

RFC/CISCO-FTP-CLIENT-MIB.MIB

@@ -0,0 +1,323 @@
+-- *****************************************************************
+-- CISCO-FTP-CLIENT-MIB.my:  FTP Client MIB
+--
+-- July 1997, Bob Stewart
+--
+-- Copyright (c) 1997, 1998, 1999, 2006 by cisco Systems, Inc.
+-- All rights reserved.
+-- 
+-- *****************************************************************
+
+CISCO-FTP-CLIENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Gauge32, Counter32,
+    Unsigned32                           FROM SNMPv2-SMI 
+    TimeStamp, RowStatus,
+    DisplayString                        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP      FROM SNMPv2-CONF
+    ciscoMgmt                            FROM CISCO-SMI;
+
+ciscoFtpClientMIB MODULE-IDENTITY
+    LAST-UPDATED "200603310000Z"
+    ORGANIZATION "Cisco Systems, Inc."
+    CONTACT-INFO "Cisco Systems
+                  Customer Service
+
+                  Postal: 170 W Tasman Drive
+                  San Jose, CA  95134
+                  USA
+
+                  Tel: +1 800 553-NETS
+
+                  E-mail: [email protected]"
+    DESCRIPTION
+      "The MIB module for invoking Internet File Transfer Protocol
+      (FTP) operations for network management purposes."
+    REVISION        "200603310000Z"
+    DESCRIPTION
+      "Updated the imports such that Unsigned32 is imported from
+      SNMPv2-SMI instead of CISCO-TC."
+    REVISION        "199710091700Z"
+    DESCRIPTION
+      "Initial version."
+    ::= { ciscoMgmt 80 }
+
+
+ciscoFtpClientMIBObjects OBJECT IDENTIFIER ::= { ciscoFtpClientMIB 1 }
+
+cfcRequest            OBJECT IDENTIFIER ::= { ciscoFtpClientMIBObjects 1 }
+
+
+--
+-- Client Request Control
+--
+
+cfcRequestMaximum OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "The maximum number of requests this system can hold in
+      cfcRequestTable.  A value of 0 indicates no configured limit.
+
+      This object may be read-only on some systems.
+
+      When an attempt is made to create a new entry but the table
+      is full, the oldest completed entry is bumped out and
+      cfcRequestsBumped is incremented.
+
+      Changing this number does not disturb existing requests that
+      are not completed and bumps completed requests as necessary."
+    ::= { cfcRequest 1 }
+
+cfcRequests OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The current number of requests in cfcRequestTable."
+    ::= { cfcRequest 2 }
+
+cfcRequestsHigh OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The highest number of requests in cfcRequestTable since this
+      system was last initialized."
+    ::= { cfcRequest 3 }
+
+cfcRequestsBumped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The number of requests in cfcRequestTable that were bumped
+      out to make room for a new request."
+    ::= { cfcRequest 4 }
+
+--
+-- Client Request Control Table
+--
+
+cfcRequestTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CfcRequestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "A table of FTP client requests."
+    ::= { cfcRequest 5 }
+
+cfcRequestEntry OBJECT-TYPE
+    SYNTAX      CfcRequestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "Information about an FTP client request.  Management applications
+      use cfcRequestEntryStatus to control entry modification, creation,
+      and deletion.
+
+      Setting cfcRequestEntryStatus to 'active' from any state including
+      'active' causes the operation to be started.
+
+      The entry may be modified only when cfcRequestOperationState is
+      'stopped'.
+
+      The value of cfcRequestEntryStatus may be set to 'destroy' at any
+      time.  Doing so will abort a running request.
+
+      Entries may not be created without explicitly setting
+      cfcRequestEntryStatus to either 'createAndGo' or 'createAndWait'."
+    INDEX       { cfcRequestIndex }
+    ::= { cfcRequestTable 1 }
+
+CfcRequestEntry ::= SEQUENCE {
+    cfcRequestIndex           Unsigned32,
+    cfcRequestOperation       INTEGER,
+    cfcRequestLocalFile       DisplayString,
+    cfcRequestRemoteFile      DisplayString,
+    cfcRequestServer          DisplayString,
+    cfcRequestUser            DisplayString,
+    cfcRequestPassword        DisplayString,
+    cfcRequestResult          INTEGER,
+    cfcRequestCompletionTime  TimeStamp,
+    cfcRequestStop            INTEGER,
+    cfcRequestOperationState  INTEGER,
+    cfcRequestEntryStatus     RowStatus
+}
+
+cfcRequestIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "An arbitrary integer to uniquely identify this entry.  To
+      create an entry a management application should pick a
+      random number."
+    ::= { cfcRequestEntry 1 }
+
+cfcRequestOperation OBJECT-TYPE
+    SYNTAX      INTEGER { putBinary(1), putASCII(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+      "The FTP operation to be performed."
+    DEFVAL      { putBinary }
+    ::= { cfcRequestEntry 2 }
+
+cfcRequestLocalFile OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+      "The local file on which the operation is to be performed."
+    ::= { cfcRequestEntry 3 }
+
+cfcRequestRemoteFile OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+      "The remote file on which the operation is to be performed."
+    ::= { cfcRequestEntry 4 }
+
+cfcRequestServer OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..64))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+      "The domain name or IP address of the FTP server to use."
+    ::= { cfcRequestEntry 5 }
+
+cfcRequestUser OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+      "The user name to use at the FTP server."
+    ::= { cfcRequestEntry 6 }
+
+cfcRequestPassword OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..16))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+      "The password to use at the FTP server.
+
+      When read this object always returns a zero-length string."
+    DEFVAL      { ''H }
+    ::= { cfcRequestEntry 7 }
+
+cfcRequestResult OBJECT-TYPE
+    SYNTAX      INTEGER {
+                pending(1),
+                success(2),
+                aborted(3),
+                fileOpenFailLocal(4),
+                fileOpenFailRemote(5),
+                badDomainName(6),
+                unreachableIpAddress(7),
+                linkFailed(8),
+                fileReadFailed(9),
+                fileWriteFailed(10)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The result of the FTP operation."
+    ::= { cfcRequestEntry 8 }
+
+cfcRequestCompletionTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The value of sysUpTime when the operation completed.  For
+      an incomplete operation this value is zero."
+    ::= { cfcRequestEntry 9 }
+
+cfcRequestStop OBJECT-TYPE
+    SYNTAX      INTEGER { ready(1), stop(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+      "The action control to stop a running request.  Setting this to
+      'stop' will begin the process of stopping the request.  Setting
+      it to 'ready' or setting it to 'stop' more than once have no
+      effect.  When read this object always returns ready."
+    ::= { cfcRequestEntry 10 }
+
+cfcRequestOperationState OBJECT-TYPE
+    SYNTAX      INTEGER { running(1), stopping(2), stopped(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The operational state of the file transfer.  To short-terminate
+      the transfer set cfcRequestStop to 'stop'."
+    ::= { cfcRequestEntry 11 }
+
+cfcRequestEntryStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+      "The control that allows modification, creation, and deletion
+      of entries.  For detailed rules see the DESCRIPTION for
+      cfcRequestEntry."
+    ::= { cfcRequestEntry 12 }
+
+
+--
+-- Conformance
+--
+
+ciscoFtpClientMIBConformance OBJECT IDENTIFIER ::= { ciscoFtpClientMIB 3 }
+
+ciscoFtpClientMIBCompliances OBJECT IDENTIFIER ::=
+      { ciscoFtpClientMIBConformance 1 }
+ciscoFtpClientMIBGroups      OBJECT IDENTIFIER ::=
+      { ciscoFtpClientMIBConformance 2 }
+
+-- Compliance
+
+ciscoFtpClientMIBCompliance MODULE-COMPLIANCE
+      STATUS current
+      DESCRIPTION
+            "The compliance statement for entities which implement
+            the Cisco FTP Client MIB.  Implementation of this MIB
+            is based on individual product needs."
+      MODULE      -- this module
+            MANDATORY-GROUPS { 
+                  ciscoFtpClientRequestGroup
+            }
+
+      ::= { ciscoFtpClientMIBCompliances 1 }
+
+-- Units of Conformance
+
+ciscoFtpClientRequestGroup OBJECT-GROUP
+      OBJECTS {
+            cfcRequestMaximum,
+            cfcRequests,
+            cfcRequestsHigh,
+            cfcRequestsBumped,
+            cfcRequestOperation,
+            cfcRequestLocalFile,
+            cfcRequestRemoteFile,
+            cfcRequestServer,
+            cfcRequestUser,
+            cfcRequestPassword,
+            cfcRequestResult,
+            cfcRequestCompletionTime,
+            cfcRequestStop,
+            cfcRequestOperationState,
+            cfcRequestEntryStatus
+      }
+      STATUS current
+      DESCRIPTION
+            "FTP client request management."
+      ::= { ciscoFtpClientMIBGroups 1 }
+
+END