Merge pull request #4 from MartynKeigher/develop

Added HP Networking

RFC/hpEntityPower.mib

@@ -0,0 +1,130 @@
+HP-ENTITY-POWER-MIB  DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+
+    entPhysicalIndex
+        FROM ENTITY-MIB
+
+    hpSwitch
+        FROM HP-ICF-OID;
+
+hpEntityPowerMIB  MODULE-IDENTITY
+    LAST-UPDATED "201004110000Z"  -- Apr 11, 2010
+    ORGANIZATION "HP Networking"
+    CONTACT-INFO "Hewlett-Packard Company
+                  8000 Foothills Blvd.
+                  Roseville, CA - 95747."
+    DESCRIPTION  "This MIB defines HP proprietary objects that can be used to
+                  set the power status of physical entities and report power
+                  usage statistics."
+
+    REVISION     "201004110000Z"  -- Apr 11, 2010
+    DESCRIPTION  "Initial version of this MIB"
+    ::= { hpSwitch 71 }
+
+-- **********************************************************************
+-- Entity Power Objects
+-- **********************************************************************
+
+    hpEntPowerObjects OBJECT IDENTIFIER ::= { hpEntityPowerMIB 1 }
+
+    hpEntPowerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF HpEntPowerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION "A table of information about the power status of entities.
+                 This is a sparse augment of the entPhysicalTable.  Entries
+                 appear in this table for values of
+                 entPhysicalClass [RFC4133] that in this implementation
+                 are able to report any of the power state or status stored in
+                 this table."
+    ::= { hpEntPowerObjects 1 }
+
+    hpEntPowerEntry OBJECT-TYPE
+    SYNTAX      HpEntPowerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION "Power related information about this physical entity."
+    INDEX       { entPhysicalIndex }
+    ::= { hpEntPowerTable 1 }
+
+    HpEntPowerEntry ::= 
+        SEQUENCE {
+            hpEntPowerMaxPowerUsage      Unsigned32,
+            hpEntPowerMinPowerUsage      Unsigned32,
+            hpEntPowerCurrentPowerUsage  Unsigned32
+        }
+
+    hpEntPowerMaxPowerUsage OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "Watts"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "This MIB object returns the maximum power
+                     usage of this entity. This would typically correspond to
+                     the maximum power rating of the entity."
+        ::= { hpEntPowerEntry 1 }
+
+    hpEntPowerMinPowerUsage OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "Watts"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "This MIB object returns the minimum power usage of
+                     this entity. This is applicable only to those entities 
+                     that can be administratively set to function in a low
+                     power state."
+        ::= { hpEntPowerEntry 2 }
+
+    hpEntPowerCurrentPowerUsage OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "Watts"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "This MIB object returns the current power usage of this
+                     entity. For entities that cannot be set to function in a
+                     low power mode, the value returned by this object would be
+                     the same as that of entPowerMaxPowerUsage. For entities
+                     that are set to function in a low power mode, the value
+                     returned would be the same as that of 
+                     entPowerMinPowerUsage."
+        ::= { hpEntPowerEntry 3 }
+
+-- **********************************************************************
+-- Conformance and Compliance
+-- **********************************************************************
+
+    hpEntPowerConformance OBJECT IDENTIFIER ::= { hpEntityPowerMIB 2 }
+
+    hpEntPowerCompliances OBJECT IDENTIFIER
+        ::= { hpEntPowerConformance 1 }
+
+    hpEntPowerCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION "The compliance statement for systems supporting
+                the HP Entity Power MIB."
+    MODULE -- this module
+    MANDATORY-GROUPS {
+       hpEntPowerGroup
+    }
+    ::= { hpEntPowerCompliances 1 }
+
+    hpEntPowerGroups OBJECT IDENTIFIER ::= { hpEntPowerConformance 2 }
+
+    hpEntPowerGroup OBJECT-GROUP
+        OBJECTS {
+            hpEntPowerMaxPowerUsage,
+            hpEntPowerMinPowerUsage,
+            hpEntPowerCurrentPowerUsage
+        }
+    STATUS   current
+    DESCRIPTION "HP proprietary Entity Power group."
+    ::= { hpEntPowerGroups 1 }
+
+END
+