-
Notifications
You must be signed in to change notification settings - Fork 12
Basic Installation Steps
Maschine2501 edited this page Mar 7, 2021
·
1 revision
- download Volumio Image:
https://volumio.org/get-started/
*download "Win32Diskimager":
https://sourceforge.net/projects/win32diskimager/
->run it to install the software
- Insert the SD card into your SD card reader -> Note the drive letter assigned to the SD card. (You can see the drive letter in the left hand column of Windows Explorer, for example G:)
- Run Win32DiskImager utility.
- Select the downloaded Volumio image file
- In the device box, select the drive letter of the SD card. (Be careful to select the correct drive: if you choose the wrong drive you could destroy the data on your computer's hard disk!)
- Click 'Write' and wait for the write to complete.
- Exit the imager and do NOT eject the SD card.
- Open your File-Explorer/File-Browser and open the SD-Card Folder, which is labled as "boot"
- Check if there is a .txt file called "userconfig.txt" -> if not, make one (empty)
- In the SD-Card Folder "boot", create a new textfile without any letters in it.
- rename the textfile to "ssh" ("newtextfile.txt -> rename -> ssh)
- put sd-card in the raspberry, (connet it to a network) and let it boot
- download either PuTTy or KiTTy (ssh clients)
- research on how to connect to a Raspberry using ssh search
- log in to the Pi with ssh, standard user=volumio, standard pw=volumio