Bump apollo-server-core from 2.11.0 to 2.21.0 in /frontend/points-hack-april20

[dependabot]

Bumps apollo-server-core from 2.11.0 to 2.21.0.

Changelog

Sourced from apollo-server-core's changelog.

v2.21.0

• Apollo Server can now be installed with graphql@15 without causing peer dependency errors or warnings. (Apollo Server has a file upload feature which was implemented as a wrapper around the graphql-upload package. We have been unable to upgrade our dependency on that package due to backwards-incompatible changes in later versions, and the version we were stuck on did not allow graphql@15 as a peer dependency. We have now switched to a fork of that old version called @apollographql/graphql-upload-8-fork that allows graphql@15.) Also bump the graphql-tools dependency from 4.0.0 to 4.0.8 for graphql@15 support. [Issue #4865](apollographql/apollo-server#4865)

v2.20.0

• apollo-server: Previously, ApolloServer.stop() functioned like net.Server.close() in that it did not close idle connections or close active connections after a grace period. This meant that trying to await ApolloServer.stop() could hang indefinitely if there are open connections. Now, this method closes idle connections, and closes active connections after 10 seconds. The grace period can be adjusted by passing the new stopGracePeriodMillis option to new ApolloServer, or disabled by passing Infinity (though it will still close idle connections). Note that this only applies to the "batteries-included" ApolloServer in the apollo-server package with its own built-in Express and HTTP servers. [PR #4908](apollographql/apollo-server#4908) [Issue #4097](apollographql/apollo-server#4097)
• apollo-server-core: When used with ApolloGateway, ApolloServer.stop now invokes ApolloGateway.stop. (This makes sense because ApolloServer already invokes ApolloGateway.load which is what starts the behavior stopped by ApolloGateway.stop.) Note that @apollo/gateway 0.23 will expect to be stopped in order for natural program shutdown to occur. [PR #4907](apollographql/apollo-server#4907) [Issue #4428](apollographql/apollo-server#4428)
• apollo-server-core: Avoid instrumenting schemas for the old graphql-extensions library unless extensions are provided. [PR #4893](apollographql/apollo-server#4893) [Issue #4889](apollographql/apollo-server#4889)
• [email protected]: The shouldReadFromCache and shouldWriteToCache hooks were always documented as returning ValueOrPromise<boolean> (ie, that they could be either sync or async), but they actually only worked if they returned a bool. Now they can be either sync or async as intended. [PR #4890](apollographql/apollo-server#4890) [Issue #4886](apollographql/apollo-server#4886)
• [email protected]: The RESTDataSource.trace method is now protected instead of private to allow more control over logging and metrics. [PR #3940](apollographql/apollo-server#3940)

v2.19.2

• apollo-server-express: types: Export ExpressContext from main module. [PR #4821](apollographql/apollo-server#4821) [Issue #3699](apollographql/apollo-server#3699)
• apollo-server-env: types: The first parameter to fetch is now marked as required, as intended and in accordance with the Fetch API specification. [PR #4822](apollographql/apollo-server#4822) [Issue #4741](apollographql/apollo-server#4741)
• apollo-server-core: Update graphql-tag package to latest, now with its graphql-js peerDependencies expanded to include ^15.0.0 [PR #4833](apollographql/apollo-server#4833)

v2.19.1

• apollo-server-core: The debugPrintReports option to ApolloServerPluginUsageReporting now prints traces as well. [PR #4805](apollographql/apollo-server#4805)

v2.19.0

• apollo-server-testing: types: Allow generic variables usage of query and mutate functions. [PR #4383](apollograpqh/apollo-server#4383)
• apollo-server-express: Export the GetMiddlewareOptions type. [PR #4599](apollograpqh/apollo-server#4599)
• apollo-server-lambda: Fix file uploads - ignore base64 decoding for multipart queries. [PR #4506](apollographql/apollo-server#4506)
• apollo-server-core: Do not send operation documents that cannot be executed to Apollo Studio. Instead, information about these operations will be combined into one "operation" for parse failures, one for validation failures, and one for unknown operation names.

v2.18.2

• apollo-server-core: Explicitly include lru-cache dependency in apollo-server-core's dependencies. [PR #4600](apollographql/apollo-server#4600)

v2.18.1

• apollo-server-core: Fix support for legacy option engine: {logger}, broken in v2.18.0. [PR #4588](apollographql/apollo-server#4588)

• apollo-server-plugin-base: The ApolloServerPlugin TypeScript type does not need to extend AnyFunctionMap, which was an unnecessary change in v2.18.0. [PR #4588](apollographql/apollo-server#4588)

• apollo-server-core: Improve a usage reporting error which occurs when you use Apollo Server in an unsupported way. [PR #4588](apollographql/apollo-server#4588)

• apollo-server-core: Fix typo in error message for unparsable/invalid schemas provided via overrideReportedSchema. [PR #4581](apollographql/apollo-server#4581)

v2.18.0

• apollo-server-core: When Apollo Server is configured with an Apollo API key, the URLs it uses to connect to Apollo's servers have changed. If the environment in which you run your servers requires you to explicitly allow connections by domain, you will need to add the new domain names. Usage reporting previously connected to https://engine-report.apollodata.com/ and now connects to https://usage-reporting.api.apollographql.com/; schema reporting previously connected to https://edge-server-reporting.api.apollographql.com/ and now connects to https://schema-reporting.api.apollographql.com/ . [PR #4453](apollographql/apollo-server#4453)

• Apollo Server's support for communicating with Apollo’s commercial products has been refactored into three separate plugins exported from apollo-server-core (for usage reporting, schema reporting, and inline tracing), configured using the standard plugins option. The engine option continues to work for backwards compatibility in the 2.x series; support for engine will be deprecated in Apollo Server 3.x. Full details are available in the migration guide. [PR #4453](apollographql/apollo-server#4453)

• To consistently support tracing, inline tracing is enabled by default on federated implementing services, even when an Apollo API key is provided. Previously it was not enabled when an API key was provided. You can disable it with ApolloServerPluginInlineTraceDisabled. [PR #4453](apollographql/apollo-server#4453)

... (truncated)

Commits

• 456487f Release
• ae81d55 Release
• 127699b Bump graphql-tools dependency from 4.0.0 to 4.0.8
• 26279de Release
• c871152 Switch to a fork of graphql-upload
• 3642ce8 Release
• baf9b25 Release
• d18b7a9 Release
• 04aab6c Make ApolloServer.stop invoke ApolloGateway.stop (#4907)
• 47a0e12 Initial edits to APQ docs
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
• @dependabot use these labels will set the current labels as the default for future PRs for this repo and language
• @dependabot use these reviewers will set the current reviewers as the default for future PRs for this repo and language
• @dependabot use these assignees will set the current assignees as the default for future PRs for this repo and language
• @dependabot use this milestone will set the current milestone as the default for future PRs for this repo and language

You can disable automated security fix PRs for this repo from the Security Alerts page.

[dependabot]

Superseded by #8257.