Options:
Usage: NpcmFwProg.exe [-c console-number] [-wre flash-type] [-a address] [-l length] [-i program-file] [-o output-file] [-bn]
-c, --comport [#] : host console port number.
-w, --prog [flash-type] : program [flash-type] data. (must assign --file)
-r, --read [flash-type] : read [flash-type] data.
-e, --erase [flash-type] : erase [flash-type] data.
-a, --addr [hex-value] : prog/read/erase address. (prog or erase must align 4K size)
-l, --len [hex-value] : prog/read/erase length. (prog or erase must align 4K size)
-i, --in [file-name] : write file data to [flash-type]. (only available with --prog option)
-o, --out [file-name] : read [flash-type] data to file. (only available with --read option)
-b, --reboot : reboot npcm400f system.
-n, --no-verify : no need verify flash program data.
-v, --version : show NpcmFwProg version.
-h, --help : this usage.
[flash-type]
mcp = NCPM400F internal flash (use for NPCM400F firmware image)
shd = NPCM400F external flash (may use for bios or recovery data, depend on use case)
pvt = NPCM400F external flash (may use for private data, depend on use case)
backup = NPCM400F external flash (may use for backup data, depend on use case)
Program:
NpcmFwProg --comport 9 --prog mcp --in zephyr-signed.bin
NpcmFwProg --comport 9 --prog mcp --in zephyr-signed.bin --reboot
NpcmFwProg --comport 9 --prog shd --in zephyr-signed.bin
NpcmFwProg --comport 9 --prog mcp --in zephyr-signed.bin --addr 0x1000 --len 0x6000
NpcmFwProg -c 9 -w shd -i bios.bin -n Read:
NpcmFwProg --comport 9 --read mcp --addr 0x0 --len 0x1000
NpcmFwProg --comport 9 --read shd --addr 0x500 --len 0x800 --out dump.bin
NpcmFwProg -c 9 -r mcp -a 0xa00 -l 0x80 -o flash-dump.bin Erase:
NpcmFwProg --comport 9 --erase mcp
NpcmFwProg --comport 9 --erase shd --addr 0x1000 --len 0x8000
NpcmFwProg -c 9 -e pvt -a 0x8000 -l 0x4000 Options:
Usage: NpcmFwProg.linux [-c console-device] [-wre flash-type] [-a address] [-l length] [-i program-file] [-o output-file] [-bn]
-c [console path] select console. ex: /dev/ttyS0
-w [flash-type] program [flash-type]. ex: mcp, shd, pvt or backup
-r [flash-type] read [flash-type]. ex: mcp, shd, pvt or backup
-e [flash-type] erase [flash-type]. ex: mcp, shd, pvt or backup
-a [address] assign address that use for program, read and erase [flash-type].
-l [length] assign length that use for program, read and erase [flash-type].
-i [input file path] input file that use to program [flash-type].
-o [output file path] output file that read from [flash-type] data.
-b reboot npcm400f system.
-n no need verify program data.
-v show NpcmFwProg.linux version.
-h this usage.
[flash-type]
mcp = NCPM400F internal flash (use for NPCM400F firmware image)
shd = NPCM400F external flash (may use for bios or recovery data, depend on use case)
pvt = NPCM400F external flash (may use for private data, depend on use case)
backup = NPCM400F external flash (may use for backup data, depend on use case)
Program:
sudo ./NpcmFwProg.linux -c /dev/ttyS2 -w mcp -i npcm-signed.bin
sudo ./NpcmFwProg.linux -c /dev/ttyS10 -w pvt -i npcm-signed.bin -n
sudo ./NpcmFwProg.linux -c /dev/ttyS8 -w shd -i bios-signed.bin -b Read:
sudo ./NpcmFwProg.linux -c /dev/ttyS0 -r pvt -a 0x100 -l 0x500
sudo ./NpcmFwProg.linux -c /dev/ttyUSB0 -r shd -a 0x100 -l 0x500 -o /usr/dump-flash Erase:
sudo ./NpcmFwProg.linux -c /dev/ttyACM0 -e backup
sudo ./NpcmFwProg.linux -c /dev/ttyUSB1 -e backup -a 0x2000 -l 0x5000