[16.0][MIG] - shopfloor #679

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

This option allows to scan product packaging for bulk products and process the packaging qty.

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

… package When picking a move, allow to set a destination package that was already used for the other lines.

With this option, the lines you process by putting on a package during the picking process will be put as bulk products at the final destination location. This is useful if your picking device is emptied at the destination location or if you want to provide bulk products to the next operation. Incompatible with: "Pick and pack at the same time"

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Currently translated at 100.0% (230 of 230 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/

No need to generate moves manually for the package level, it is done automatically by calling `action_confirm` on its picking right after.

It is already working for package levels containing only one product/move, but it doesn't for packages having several products.

Fix 'Expected singleton' error when calling the cancel action. As a package could contain multiple products, a package level could be linked to multiple moves.

When scanning a location out of the previously selected zone, instead of sending the user back to the start, keep him on the line selection of the zone.

The user may end up in the `scan_location` screen with some products to unload. It can happen when clicking on the back button but also when there is no lines left to process in the current zone. This change adds an Unload At Destination button on the `scan_location` screen which will be display only when the user has some product to unload.

Fix the error raised when there are multiple lots in location. In case of error, reduce the list to the new location scanned and displayed lines are filtered accordingly.

Ff multiple move lines are found on several locations, raise an error and filter the list with the matched moves. If multiple move lines are found for different lots, raise an error and filter the list with the matched moves.

If multiple move lines are found on several locations, display a message and filter the list with the matched moves. If multiple move lines are found for different products, raise an error "Several products found, please scan first a product"

Check the content of the location not the move lines of the picking.

Fix the error raised if there are multiple packs, products or lot in the location. Not based on move lines but based on actual stock at location.

Take into account the content of the location not move on the picking when checking for lot in multiple packages.

The tests were like they were because the code was testing the existance of a lot, pack or product in a location based on existing pick/moves. But now the code tests the location directely for such information.

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

When scanning a product barcode or a lot the scenario will search for all related move lines and pick the first one by default. For a shopfloor menu configuration with locations containing sub locations this is not ideal. Because a user working at a sub location only wants move lines related to that sub location to be selected. To help with this situation, a user can first scan his working location which is kept as long as no other location is scanned. The sub location set can also be reset by the click of a button. Also when the search for a move line to work on returns multiple move lines related to different locations and no location has been preliminary scanned. The user will be prompted to scann a location first.

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Change the search to first look on the barcode field and then on location name.

…option

If the same bulk product was present in several delivery operations (of the same picking type), the first call to 'scan_deliver' was working, but with the side-effect to set the `qty_done` for the lines of ALL delivery operations related to this product. This fix will process only the lines from one delivery operation at a time, leaving the other lines untouched so they can be processed by subsequent calls to `scan_deliver`, without raising the `"No product found among current transfers."` error anymore (product was not found because of the `qty_done` set during the first scan).

Currently translated at 100.0% (237 of 237 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/

Until now a line was always fully delivered. With this change For move lines without pacakge: * When scanning a product only a quantity of one should be processed. * When scanning a packaging process the quantity of the packaging. For move lines with a package: * When scanning a product only if the line package contains one unity of the product and that product only.

As the tooltip of the option was describing, its main goal is to validate the delivery order (and create a backorder if needed) as soon as a goods is scanned. This could be a package, a product, a packaging or a lot. Also, in all cases, when we scan a lot we want to process 1 qty (like for product scanning), not all the line.

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Currently translated at 100.0% (240 of 240 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/

* allow to turn off group by location * ease override for lines manipulation

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Currently translated at 100.0% (250 of 250 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/

This part is removed because it is done by `mark_move_line_as_picked` further down

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Doing a scan of a location to restrict the search for the next scan on a product, was not working.

Currently translated at 100.0% (255 of 255 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/

Co-authored-by: Matthieu Méquignon <[email protected]> Co-authored-by: Juan Miguel Sánchez Arce <[email protected]> Co-authored-by: Jacques-Etienne Baudoux <[email protected]>

Co-authored-by: Juan Miguel Sánchez Arce <[email protected]> Co-authored-by: Matthieu Méquignon <[email protected]> Co-authored-by: Jacques-Etienne Baudoux <[email protected]>

When scanning a location the quantity should be set when the no prefill quantity option is not enabled.

Disable the splitting of move lines when the quantity is not totally done. The diff should be properly taken into account during the put in pack.

On `select_line` when a product is scanned and it is not in a package, the other line not in a package are also selected, but their quantity done is not changed.

Following the changes on the no prefill quantity option. The quantity done is passed on the move line record to the frontend, but not written on the record. A few places were not updated properly for this.

When the no prefill quantity option is set on scanning a barcode only one line matching the barcode scanned should be incremented.

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

When scanning a package use the location of that package to filter on sub location. So if the package has multiple products, the user will not be required to scan a location after scanning the product.

In the shopfloor workflow the user_id should not be propagated to any backorder created.

Currently translated at 100.0% (258 of 258 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/

When the source package scanned is not valid not need to check its content for multiple products or lots.

A move line may not be linked to a move, use picking_id from the line. Extract other move line from picking if they are being worked on by an other user

shopfloor: fix progress data in shopfloor rests

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

A more flexible way to search for records.

Currently translated at 100.0% (260 of 260 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/

A move line can be in ready state, but the related picking not. This happens when the shipping policy on the pciking is set to `one` (When all products are ready). After this change, move lines from a picking not ready, will not be offered to work on by the location content transfer scenario.

On the select_line screen, you can now skip the selection and scan a delivery package. When this happens, the system asks for confirmation. If you scan again the delivery package, all lines will be selected and packed at the same time in the same package.

Use the content of the package (products) and not the product in the packaging description to search for possible move lines.

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Add menu flag to disable the full bin action. This way the operator is forced to finish the picking using additional bins when full.

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Currently translated at 100.0% (265 of 265 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/

Before: Also pickings were found which are already assigned to a user This leaded to two problems: - if the qty done was already set to the max qty by an other user you always got the error no work - or you got the same location and the same move lines as the user before Now: The find_work method gets locked, before finding a location. Also it searches now for all assigned pickings, which are not marked as printed and returns the location of the first open move_line

Avoid calling '_action_done' on non assigned pickings.

Searching only via barcode is limited. You might have not have a barcode (eg: only manuf code on a label) and the search should still work.

On the menu item you can decide to enable the option 'show_oneline_package_content'. Once enabled, on the select line screen, if the package contains only one line the lot and the product name will be shown. The use case it tries to solve: you have multiple packs in front of you and you want to be able to scan any of the packs using the lot or the product.

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Before: Only pickings were found which are printed = False Now: find_work will find pickings which are not assigned or assigned to the current user also it sorts the pickings by user_id, create_date this ensures that a already assign picking will be selected a first

Add a new scenario option `First scan location or pack`. And implement it on the zone picking scenario.

Use the content of the package (products) and not the product in the packaging description to search for possible move lines.

Currently translated at 100.0% (268 of 268 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/

[UPD] Update shopfloor.pot

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/ [UPD] Update shopfloor.pot [UPD] README.rst

Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

The move line must be linked to the new split move before calling _action_confirm. In case of a reception picking where the supplier location bypass the reservation, action_assign is called by _action_config here https://github.com/odoo/odoo/blob/14.0/addons/stock/models/stock_move.py#L1177 which causes the creation of an unwanted new move line here https://github.com/odoo/odoo/blob/14.0/addons/stock/models/stock_move.py#L1324 This is why we must relink the existing move line to the new move before calling _action_confirm. The new move line was also causing the original picking to change state to waiting.

Do not allow a user to pick a quantity of zero or less. When the `no_prefill_qty` is set. A quantity of zero is the default value and it will still work. [UPD] Update shopfloor.pot

Removing move lines assigned to another user in the list of available work. Tthe risk of users working on the same line is reduced.

Currently translated at 100.0% (271 of 271 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/ Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/ Translated using Weblate (Spanish (Argentina)) Currently translated at 100.0% (272 of 272 strings) Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/es_AR/

[UPD] Update shopfloor.pot

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Removed because we always want to jump to the next screen when the right package is scanned. The scanning of the product or lot will be done on the next screen. Also the use of `pick_next_line` when there is an error message does not make sense.

[UPD] README.rst

[UPD] Update shopfloor.pot Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

[UPD] Update shopfloor.pot

Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Rephrasing the error message when a product or a lot has been found for a barcode. But there is no picking that matches it in the current context. [UPD] Update shopfloor.pot

Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Make _find_location_move_lines from scan location hookable

Decouple the scenario options * Unload package at destination * Collect multiple moves on a same destination package So they can be selected independently.

We allow the user to scan units beyond the qty todo, but we block the option of assigning packages until the qty is reduced to an allowed value

Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

[UPD] Update shopfloor.pot Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/ [UPD] Update shopfloor.pot

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

With the option scan_location_or_pack_first on. When scanning a location, only the lines without a source package are offered to be processed. If none are found, ask for scanning a package. [UPD] Update shopfloor.pot

Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

[UPD] Update shopfloor.pot

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/ [UPD] Update shopfloor.pot

Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

As shopfloor will handle RMA, we might have to check draft pickings from time to time. This commit allows to extend the default "assigned" state in such case.

[UPD] Update shopfloor.pot

Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: wms-14.0/wms-14.0-shopfloor Translate-URL: https://translation.odoo-community.org/projects/wms-14-0/wms-14-0-shopfloor/

Change lot process extracted to the module stock_move_line_change_lot

…rder strategy Prior to this change, when a line was partially picking the created a new move for the remaining qty. We now let the validation mechanism of odoo create the remaining move since it will take into account the backorder strategy defined on the picking type

When a line is partially processed in the location_content_transfer scenario, the next operation must be the one for the remaining qty. To do it, we need to know where the backorder where the remaining operation has been put to force the selection of the next line to process from the backorder picking

When an inventory is created and must be validated, the 'inventory_quantity_set' field is set to True on the quant

Makes the sorting of stock move line more predictable if move lines share the same attributes

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[16.0][MIG] - shopfloor #679

[16.0][MIG] - shopfloor #679

Commits on May 2, 2024