Y030xx067a #6

citral23 · 2020-10-19T12:42:44Z

Fixed timings so we get a perfect 60Hz based on (320+(x/3))*(480+y)3Refresh=PixelClock.

Added "PIXELCOLORWIRE" to the init sequence so the panel behaves as RGBRGB despite being RGBGBR delta in reality.

This patch avoid the warning in vkms_get_vblank_timestamp when vblanks aren't enabled. When running igt test kms_cursor_crc just after vkms module, the warning raised like below. Initial value of vblank time is zero and hrtimer.node.expires is also zero if vblank aren't enabled before. vkms module isn't real hardware but just virtual hardware module. so vkms can't generate a resonable timestamp when hrtimer is off. it's best to grab the current time. [106444.464503] [IGT] kms_cursor_crc: starting subtest pipe-A-cursor-size-change [106444.471475] WARNING: CPU: 0 PID: 10109 at vkms_get_vblank_timestamp+0x42/0x50 [vkms] [106444.471511] CPU: 0 PID: 10109 Comm: kms_cursor_crc Tainted: G W OE 5.9.0-rc1+ #6 [106444.471514] RIP: 0010:vkms_get_vblank_timestamp+0x42/0x50 [vkms] [106444.471528] Call Trace: [106444.471551] drm_get_last_vbltimestamp+0xb9/0xd0 [drm] [106444.471566] drm_reset_vblank_timestamp+0x63/0xe0 [drm] [106444.471579] drm_crtc_vblank_on+0x85/0x150 [drm] [106444.471582] vkms_crtc_atomic_enable+0xe/0x10 [vkms] [106444.471592] drm_atomic_helper_commit_modeset_enables+0x1db/0x230 [drm_kms_helper] [106444.471594] vkms_atomic_commit_tail+0x38/0xc0 [vkms] [106444.471601] commit_tail+0x97/0x130 [drm_kms_helper] [106444.471608] drm_atomic_helper_commit+0x117/0x140 [drm_kms_helper] [106444.471622] drm_atomic_commit+0x4a/0x50 [drm] [106444.471629] drm_atomic_helper_set_config+0x63/0xb0 [drm_kms_helper] [106444.471642] drm_mode_setcrtc+0x1d9/0x7b0 [drm] [106444.471654] ? drm_mode_getcrtc+0x1a0/0x1a0 [drm] [106444.471666] drm_ioctl_kernel+0xb6/0x100 [drm] [106444.471677] drm_ioctl+0x3ad/0x470 [drm] [106444.471688] ? drm_mode_getcrtc+0x1a0/0x1a0 [drm] [106444.471692] ? tomoyo_file_ioctl+0x19/0x20 [106444.471694] __x64_sys_ioctl+0x96/0xd0 [106444.471697] do_syscall_64+0x37/0x80 [106444.471699] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: Daniel Vetter <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Haneen Mohammed <[email protected]> Cc: Melissa Wen <[email protected]> Signed-off-by: Sidong Yang <[email protected]> Reviewed-by: Melissa Wen <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Current neigh update event handler implementation takes reference to neighbour structure, assigns it to nhe->n, tries to schedule workqueue task and releases the reference if task was already enqueued. This results potentially overwriting existing nhe->n pointer with another neighbour instance, which causes double release of the instance (once in neigh update handler that failed to enqueue to workqueue and another one in neigh update workqueue task that processes updated nhe->n pointer instead of original one): [ 3376.512806] ------------[ cut here ]------------ [ 3376.513534] refcount_t: underflow; use-after-free. [ 3376.521213] Modules linked in: act_skbedit act_mirred act_tunnel_key vxlan ip6_udp_tunnel udp_tunnel nfnetlink act_gact cls_flower sch_ingress openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 mlx5_ib mlx5_core mlxfw pci_hyperv_intf ptp pps_core nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp rpcrdma rdma_ucm ib_umad ib_ipoib ib_iser rdma_cm ib_cm iw_cm rfkill ib_uverbs ib_core sunrpc kvm_intel kvm iTCO_wdt iTCO_vendor_support virtio_net irqbypass net_failover crc32_pclmul lpc_ich i2c_i801 failover pcspkr i2c_smbus mfd_core ghash_clmulni_intel sch_fq_codel drm i2c _core ip_tables crc32c_intel serio_raw [last unloaded: mlxfw] [ 3376.529468] CPU: 8 PID: 22756 Comm: kworker/u20:5 Not tainted 5.9.0-rc5+ OpenDingux#6 [ 3376.530399] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 3376.531975] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [ 3376.532820] RIP: 0010:refcount_warn_saturate+0xd8/0xe0 [ 3376.533589] Code: ff 48 c7 c7 e0 b8 27 82 c6 05 0b b6 09 01 01 e8 94 93 c1 ff 0f 0b c3 48 c7 c7 88 b8 27 82 c6 05 f7 b5 09 01 01 e8 7e 93 c1 ff <0f> 0b c3 0f 1f 44 00 00 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13 [ 3376.536017] RSP: 0018:ffffc90002a97e30 EFLAGS: 00010286 [ 3376.536793] RAX: 0000000000000000 RBX: ffff8882de30d648 RCX: 0000000000000000 [ 3376.537718] RDX: ffff8882f5c28f20 RSI: ffff8882f5c18e40 RDI: ffff8882f5c18e40 [ 3376.538654] RBP: ffff8882cdf56c00 R08: 000000000000c580 R09: 0000000000001a4d [ 3376.539582] R10: 0000000000000731 R11: ffffc90002a97ccd R12: 0000000000000000 [ 3376.540519] R13: ffff8882de30d600 R14: ffff8882de30d640 R15: ffff88821e000900 [ 3376.541444] FS: 0000000000000000(0000) GS:ffff8882f5c00000(0000) knlGS:0000000000000000 [ 3376.542732] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3376.543545] CR2: 0000556e5504b248 CR3: 00000002c6f10005 CR4: 0000000000770ee0 [ 3376.544483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3376.545419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3376.546344] PKRU: 55555554 [ 3376.546911] Call Trace: [ 3376.547479] mlx5e_rep_neigh_update.cold+0x33/0xe2 [mlx5_core] [ 3376.548299] process_one_work+0x1d8/0x390 [ 3376.548977] worker_thread+0x4d/0x3e0 [ 3376.549631] ? rescuer_thread+0x3e0/0x3e0 [ 3376.550295] kthread+0x118/0x130 [ 3376.550914] ? kthread_create_worker_on_cpu+0x70/0x70 [ 3376.551675] ret_from_fork+0x1f/0x30 [ 3376.552312] ---[ end trace d84e8f46d2a77eec ]--- Fix the bug by moving work_struct to dedicated dynamically-allocated structure. This enabled every event handler to work on its own private neighbour pointer and removes the need for handling the case when task is already enqueued. Fixes: 232c001 ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Very sporadically I had test case btrfs/069 from fstests hanging (for years, it is not a recent regression), with the following traces in dmesg/syslog: [162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started [162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0 [162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished [162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds. [162513.514318] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.514747] task:btrfs-transacti state:D stack: 0 pid:1356167 ppid: 2 flags:0x00004000 [162513.514751] Call Trace: [162513.514761] __schedule+0x5ce/0xd00 [162513.514765] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.514771] schedule+0x46/0xf0 [162513.514844] wait_current_trans+0xde/0x140 [btrfs] [162513.514850] ? finish_wait+0x90/0x90 [162513.514864] start_transaction+0x37c/0x5f0 [btrfs] [162513.514879] transaction_kthread+0xa4/0x170 [btrfs] [162513.514891] ? btrfs_cleanup_transaction+0x660/0x660 [btrfs] [162513.514894] kthread+0x153/0x170 [162513.514897] ? kthread_stop+0x2c0/0x2c0 [162513.514902] ret_from_fork+0x22/0x30 [162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds. [162513.515192] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.515680] task:fsstress state:D stack: 0 pid:1356184 ppid:1356177 flags:0x00004000 [162513.515682] Call Trace: [162513.515688] __schedule+0x5ce/0xd00 [162513.515691] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.515697] schedule+0x46/0xf0 [162513.515712] wait_current_trans+0xde/0x140 [btrfs] [162513.515716] ? finish_wait+0x90/0x90 [162513.515729] start_transaction+0x37c/0x5f0 [btrfs] [162513.515743] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.515753] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.515758] ? __ia32_sys_fdatasync+0x20/0x20 [162513.515761] iterate_supers+0x87/0xf0 [162513.515765] ksys_sync+0x60/0xb0 [162513.515768] __do_sys_sync+0xa/0x10 [162513.515771] do_syscall_64+0x33/0x80 [162513.515774] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.515781] RIP: 0033:0x7f5238f50bd7 [162513.515782] Code: Bad RIP value. [162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a [162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0 [162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a [162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds. [162513.516064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.516617] task:fsstress state:D stack: 0 pid:1356185 ppid:1356177 flags:0x00000000 [162513.516620] Call Trace: [162513.516625] __schedule+0x5ce/0xd00 [162513.516628] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.516634] schedule+0x46/0xf0 [162513.516647] wait_current_trans+0xde/0x140 [btrfs] [162513.516650] ? finish_wait+0x90/0x90 [162513.516662] start_transaction+0x4d7/0x5f0 [btrfs] [162513.516679] btrfs_setxattr_trans+0x3c/0x100 [btrfs] [162513.516686] __vfs_setxattr+0x66/0x80 [162513.516691] __vfs_setxattr_noperm+0x70/0x200 [162513.516697] vfs_setxattr+0x6b/0x120 [162513.516703] setxattr+0x125/0x240 [162513.516709] ? lock_acquire+0xb1/0x480 [162513.516712] ? mnt_want_write+0x20/0x50 [162513.516721] ? rcu_read_lock_any_held+0x8e/0xb0 [162513.516723] ? preempt_count_add+0x49/0xa0 [162513.516725] ? __sb_start_write+0x19b/0x290 [162513.516727] ? preempt_count_add+0x49/0xa0 [162513.516732] path_setxattr+0xba/0xd0 [162513.516739] __x64_sys_setxattr+0x27/0x30 [162513.516741] do_syscall_64+0x33/0x80 [162513.516743] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.516745] RIP: 0033:0x7f5238f56d5a [162513.516746] Code: Bad RIP value. [162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc [162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a [162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470 [162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700 [162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004 [162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0 [162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds. [162513.517064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.517763] task:fsstress state:D stack: 0 pid:1356196 ppid:1356177 flags:0x00004000 [162513.517780] Call Trace: [162513.517786] __schedule+0x5ce/0xd00 [162513.517789] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.517796] schedule+0x46/0xf0 [162513.517810] wait_current_trans+0xde/0x140 [btrfs] [162513.517814] ? finish_wait+0x90/0x90 [162513.517829] start_transaction+0x37c/0x5f0 [btrfs] [162513.517845] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.517857] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.517862] ? __ia32_sys_fdatasync+0x20/0x20 [162513.517865] iterate_supers+0x87/0xf0 [162513.517869] ksys_sync+0x60/0xb0 [162513.517872] __do_sys_sync+0xa/0x10 [162513.517875] do_syscall_64+0x33/0x80 [162513.517878] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.517881] RIP: 0033:0x7f5238f50bd7 [162513.517883] Code: Bad RIP value. [162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053 [162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0 [162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053 [162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds. [162513.518298] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.519157] task:fsstress state:D stack: 0 pid:1356197 ppid:1356177 flags:0x00000000 [162513.519160] Call Trace: [162513.519165] __schedule+0x5ce/0xd00 [162513.519168] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.519174] schedule+0x46/0xf0 [162513.519190] wait_current_trans+0xde/0x140 [btrfs] [162513.519193] ? finish_wait+0x90/0x90 [162513.519206] start_transaction+0x4d7/0x5f0 [btrfs] [162513.519222] btrfs_create+0x57/0x200 [btrfs] [162513.519230] lookup_open+0x522/0x650 [162513.519246] path_openat+0x2b8/0xa50 [162513.519270] do_filp_open+0x91/0x100 [162513.519275] ? find_held_lock+0x32/0x90 [162513.519280] ? lock_acquired+0x33b/0x470 [162513.519285] ? do_raw_spin_unlock+0x4b/0xc0 [162513.519287] ? _raw_spin_unlock+0x29/0x40 [162513.519295] do_sys_openat2+0x20d/0x2d0 [162513.519300] do_sys_open+0x44/0x80 [162513.519304] do_syscall_64+0x33/0x80 [162513.519307] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.519309] RIP: 0033:0x7f5238f4a903 [162513.519310] Code: Bad RIP value. [162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 [162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903 [162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470 [162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002 [162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013 [162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620 [162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds. [162513.519727] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.520508] task:btrfs state:D stack: 0 pid:1356211 ppid:1356178 flags:0x00004002 [162513.520511] Call Trace: [162513.520516] __schedule+0x5ce/0xd00 [162513.520519] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.520525] schedule+0x46/0xf0 [162513.520544] btrfs_scrub_pause+0x11f/0x180 [btrfs] [162513.520548] ? finish_wait+0x90/0x90 [162513.520562] btrfs_commit_transaction+0x45a/0xc30 [btrfs] [162513.520574] ? start_transaction+0xe0/0x5f0 [btrfs] [162513.520596] btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs] [162513.520619] btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs] [162513.520639] btrfs_ioctl+0x2a25/0x36f0 [btrfs] [162513.520643] ? do_sigaction+0xf3/0x240 [162513.520645] ? find_held_lock+0x32/0x90 [162513.520648] ? do_sigaction+0xf3/0x240 [162513.520651] ? lock_acquired+0x33b/0x470 [162513.520655] ? _raw_spin_unlock_irq+0x24/0x50 [162513.520657] ? lockdep_hardirqs_on+0x7d/0x100 [162513.520660] ? _raw_spin_unlock_irq+0x35/0x50 [162513.520662] ? do_sigaction+0xf3/0x240 [162513.520671] ? __x64_sys_ioctl+0x83/0xb0 [162513.520672] __x64_sys_ioctl+0x83/0xb0 [162513.520677] do_syscall_64+0x33/0x80 [162513.520679] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.520681] RIP: 0033:0x7fc3cd307d87 [162513.520682] Code: Bad RIP value. [162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87 [162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003 [162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003 [162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001 [162513.520703] Showing all locks held in the system: [162513.520712] 1 lock held by khungtaskd/54: [162513.520713] #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197 [162513.520728] 1 lock held by in:imklog/596: [162513.520729] #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60 [162513.520782] 1 lock held by btrfs-transacti/1356167: [162513.520784] #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs] [162513.520798] 1 lock held by btrfs/1356190: [162513.520800] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60 [162513.520805] 1 lock held by fsstress/1356184: [162513.520806] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520811] 3 locks held by fsstress/1356185: [162513.520812] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520815] #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120 [162513.520820] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520833] 1 lock held by fsstress/1356196: [162513.520834] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520838] 3 locks held by fsstress/1356197: [162513.520839] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520843] #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50 [162513.520846] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520858] 2 locks held by btrfs/1356211: [162513.520859] #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs] [162513.520877] #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] This was weird because the stack traces show that a transaction commit, triggered by a device replace operation, is blocking trying to pause any running scrubs but there are no stack traces of blocked tasks doing a scrub. After poking around with drgn, I noticed there was a scrub task that was constantly running and blocking for shorts periods of time: >>> t = find_task(prog, 1356190) >>> prog.stack_trace(t) #0 __schedule+0x5ce/0xcfc #1 schedule+0x46/0xe4 #2 schedule_timeout+0x1df/0x475 #3 btrfs_reada_wait+0xda/0x132 #4 scrub_stripe+0x2a8/0x112f #5 scrub_chunk+0xcd/0x134 #6 scrub_enumerate_chunks+0x29e/0x5ee #7 btrfs_scrub_dev+0x2d5/0x91b #8 btrfs_ioctl+0x7f5/0x36e7 #9 __x64_sys_ioctl+0x83/0xb0 #10 do_syscall_64+0x33/0x77 #11 entry_SYSCALL_64+0x7c/0x156 Which corresponds to: int btrfs_reada_wait(void *handle) { struct reada_control *rc = handle; struct btrfs_fs_info *fs_info = rc->fs_info; while (atomic_read(&rc->elems)) { if (!atomic_read(&fs_info->reada_works_cnt)) reada_start_machine(fs_info); wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0, (HZ + 9) / 10); } (...) So the counter "rc->elems" was set to 1 and never decreased to 0, causing the scrub task to loop forever in that function. Then I used the following script for drgn to check the readahead requests: $ cat dump_reada.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) def dump_re(re): nzones = re.nzones.value_() print(f're at {hex(re.value_())}') print(f'\t logical {re.logical.value_()}') print(f'\t refcnt {re.refcnt.value_()}') print(f'\t nzones {nzones}') for i in range(nzones): dev = re.zones[i].device name = dev.name.str.string_() print(f'\t\t dev id {dev.devid.value_()} name {name}') print() for _, e in radix_tree_for_each(fs_info.reada_tree): re = cast('struct reada_extent *', e) dump_re(re) $ drgn dump_reada.py re at 0xffff8f3da9d25ad8 logical 38928384 refcnt 1 nzones 1 dev id 0 name b'/dev/sdd' $ So there was one readahead extent with a single zone corresponding to the source device of that last device replace operation logged in dmesg/syslog. Also the ID of that zone's device was 0 which is a special value set in the source device of a device replace operation when the operation finishes (constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()), confirming again that device /dev/sdd was the source of a device replace operation. Normally there should be as many zones in the readahead extent as there are devices, and I wasn't expecting the extent to be in a block group with a 'single' profile, so I went and confirmed with the following drgn script that there weren't any single profile block groups: $ cat dump_block_groups.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) BTRFS_BLOCK_GROUP_DATA = (1 << 0) BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1) BTRFS_BLOCK_GROUP_METADATA = (1 << 2) BTRFS_BLOCK_GROUP_RAID0 = (1 << 3) BTRFS_BLOCK_GROUP_RAID1 = (1 << 4) BTRFS_BLOCK_GROUP_DUP = (1 << 5) BTRFS_BLOCK_GROUP_RAID10 = (1 << 6) BTRFS_BLOCK_GROUP_RAID5 = (1 << 7) BTRFS_BLOCK_GROUP_RAID6 = (1 << 8) BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9) BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10) def bg_flags_string(bg): flags = bg.flags.value_() ret = '' if flags & BTRFS_BLOCK_GROUP_DATA: ret = 'data' if flags & BTRFS_BLOCK_GROUP_METADATA: if len(ret) > 0: ret += '|' ret += 'meta' if flags & BTRFS_BLOCK_GROUP_SYSTEM: if len(ret) > 0: ret += '|' ret += 'system' if flags & BTRFS_BLOCK_GROUP_RAID0: ret += ' raid0' elif flags & BTRFS_BLOCK_GROUP_RAID1: ret += ' raid1' elif flags & BTRFS_BLOCK_GROUP_DUP: ret += ' dup' elif flags & BTRFS_BLOCK_GROUP_RAID10: ret += ' raid10' elif flags & BTRFS_BLOCK_GROUP_RAID5: ret += ' raid5' elif flags & BTRFS_BLOCK_GROUP_RAID6: ret += ' raid6' elif flags & BTRFS_BLOCK_GROUP_RAID1C3: ret += ' raid1c3' elif flags & BTRFS_BLOCK_GROUP_RAID1C4: ret += ' raid1c4' else: ret += ' single' return ret def dump_bg(bg): print() print(f'block group at {hex(bg.value_())}') print(f'\t start {bg.start.value_()} length {bg.length.value_()}') print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}') bg_root = fs_info.block_group_cache_tree.address_of_() for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'): dump_bg(bg) $ drgn dump_block_groups.py block group at 0xffff8f3d673b0400 start 22020096 length 16777216 flags 258 - system raid6 block group at 0xffff8f3d53ddb400 start 38797312 length 536870912 flags 260 - meta raid6 block group at 0xffff8f3d5f4d9c00 start 575668224 length 2147483648 flags 257 - data raid6 block group at 0xffff8f3d08189000 start 2723151872 length 67108864 flags 258 - system raid6 block group at 0xffff8f3db70ff000 start 2790260736 length 1073741824 flags 260 - meta raid6 block group at 0xffff8f3d5f4dd800 start 3864002560 length 67108864 flags 258 - system raid6 block group at 0xffff8f3d67037000 start 3931111424 length 2147483648 flags 257 - data raid6 $ So there were only 2 reasons left for having a readahead extent with a single zone: reada_find_zone(), called when creating a readahead extent, returned NULL either because we failed to find the corresponding block group or because a memory allocation failed. With some additional and custom tracing I figured out that on every further ocurrence of the problem the block group had just been deleted when we were looping to create the zones for the readahead extent (at reada_find_extent()), so we ended up with only one zone in the readahead extent, corresponding to a device that ends up getting replaced. So after figuring that out it became obvious why the hang happens: 1) Task A starts a scrub on any device of the filesystem, except for device /dev/sdd; 2) Task B starts a device replace with /dev/sdd as the source device; 3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently starting to scrub a stripe from block group X. This call to btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add() calls reada_add_block(), it passes the logical address of the extent tree's root node as its 'logical' argument - a value of 38928384; 4) Task A then enters reada_find_extent(), called from reada_add_block(). It finds there isn't any existing readahead extent for the logical address 38928384, so it proceeds to the path of creating a new one. It calls btrfs_map_block() to find out which stripes exist for the block group X. On the first iteration of the for loop that iterates over the stripes, it finds the stripe for device /dev/sdd, so it creates one zone for that device and adds it to the readahead extent. Before getting into the second iteration of the loop, the cleanup kthread deletes block group X because it was empty. So in the iterations for the remaining stripes it does not add more zones to the readahead extent, because the calls to reada_find_zone() returned NULL because they couldn't find block group X anymore. As a result the new readahead extent has a single zone, corresponding to the device /dev/sdd; 4) Before task A returns to btrfs_reada_add() and queues the readahead job for the readahead work queue, task B finishes the device replace and at btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new device /dev/sdg; 5) Task A returns to reada_add_block(), which increments the counter "->elems" of the reada_control structure allocated at btrfs_reada_add(). Then it returns back to btrfs_reada_add() and calls reada_start_machine(). This queues a job in the readahead work queue to run the function reada_start_machine_worker(), which calls __reada_start_machine(). At __reada_start_machine() we take the device list mutex and for each device found in the current device list, we call reada_start_machine_dev() to start the readahead work. However at this point the device /dev/sdd was already freed and is not in the device list anymore. This means the corresponding readahead for the extent at 38928384 is never started, and therefore the "->elems" counter of the reada_control structure allocated at btrfs_reada_add() never goes down to 0, causing the call to btrfs_reada_wait(), done by the scrub task, to wait forever. Note that the readahead request can be made either after the device replace started or before it started, however in pratice it is very unlikely that a device replace is able to start after a readahead request is made and is able to complete before the readahead request completes - maybe only on a very small and nearly empty filesystem. This hang however is not the only problem we can have with readahead and device removals. When the readahead extent has other zones other than the one corresponding to the device that is being removed (either by a device replace or a device remove operation), we risk having a use-after-free on the device when dropping the last reference of the readahead extent. For example if we create a readahead extent with two zones, one for the device /dev/sdd and one for the device /dev/sde: 1) Before the readahead worker starts, the device /dev/sdd is removed, and the corresponding btrfs_device structure is freed. However the readahead extent still has the zone pointing to the device structure; 2) When the readahead worker starts, it only finds device /dev/sde in the current device list of the filesystem; 3) It starts the readahead work, at reada_start_machine_dev(), using the device /dev/sde; 4) Then when it finishes reading the extent from device /dev/sde, it calls __readahead_hook() which ends up dropping the last reference on the readahead extent through the last call to reada_extent_put(); 5) At reada_extent_put() it iterates over each zone of the readahead extent and attempts to delete an element from the device's 'reada_extents' radix tree, resulting in a use-after-free, as the device pointer of the zone for /dev/sdd is now stale. We can also access the device after dropping the last reference of a zone, through reada_zone_release(), also called by reada_extent_put(). And a device remove suffers the same problem, however since it shrinks the device size down to zero before removing the device, it is very unlikely to still have readahead requests not completed by the time we free the device, the only possibility is if the device has a very little space allocated. While the hang problem is exclusive to scrub, since it is currently the only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free problem affects any path that triggers readhead, which includes btree_readahead_hook() and __readahead_hook() (a readahead worker can trigger readahed for the children of a node) for example - any path that ends up calling reada_add_block() can trigger the use-after-free after a device is removed. So fix this by waiting for any readahead requests for a device to complete before removing a device, ensuring that while waiting for existing ones no new ones can be made. This problem has been around for a very long time - the readahead code was added in 2011, device remove exists since 2008 and device replace was introduced in 2013, hard to pick a specific commit for a git Fixes tag. CC: [email protected] # 4.4+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

This fix is for a failure that occurred in the DWARF unwind perf test. Stack unwinders may probe memory when looking for frames. Memory sanitizer will poison and track uninitialized memory on the stack, and on the heap if the value is copied to the heap. This can lead to false memory sanitizer failures for the use of an uninitialized value. Avoid this problem by removing the poison on the copied stack. The full msan failure with track origins looks like: ==2168==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 MIPS#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 MIPS#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 MIPS#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 MIPS#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 MIPS#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 MIPS#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 MIPS#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 MIPS#23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22 #1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13 #2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 MIPS#16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 MIPS#17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 MIPS#18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 MIPS#19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 MIPS#20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 MIPS#21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 MIPS#22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 MIPS#23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 MIPS#24 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 MIPS#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 MIPS#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 MIPS#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 MIPS#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 MIPS#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 MIPS#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 MIPS#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 MIPS#23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10 #1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13 #2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18 #3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 MIPS#16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 MIPS#17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 MIPS#18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 MIPS#19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 MIPS#20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 MIPS#21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 MIPS#22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 MIPS#23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 MIPS#24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 MIPS#25 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3 #1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2 #2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9 #3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6 #4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 MIPS#16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 MIPS#17 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events' #0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445 SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: [email protected] Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sandeep Dasgupta <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Actually, burst size is equal to '1 << desc->rqcfg.brst_size'. we should use burst size, not desc->rqcfg.brst_size. dma memcpy performance on Rockchip RV1126 @ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA: dmatest: /# echo dma0chan0 > /sys/module/dmatest/parameters/channel /# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size /# echo 8 > /sys/module/dmatest/parameters/iterations /# echo y > /sys/module/dmatest/parameters/norandom /# echo y > /sys/module/dmatest/parameters/verbose /# echo 1 > /sys/module/dmatest/parameters/run dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 Before: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0) After this patch: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0) After this patch and increase dma clk to 400MHz: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0) Signed-off-by: Sugar Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>

Like other tunneling interfaces, the bareudp doesn't need TXLOCK. So, It is good to set the NETIF_F_LLTX flag to improve performance and to avoid lockdep's false-positive warning. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 10.0.0.1/24 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 10.0.0.2/24 dev veth1 for i in {2..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec A ip link set bareudp$i up ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \ dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec B ip link set bareudp$i up ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \ dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i done ip netns exec A ping 10.0.2.2 Splat looks like: [ 96.992803][ T822] ============================================ [ 96.993954][ T822] WARNING: possible recursive locking detected [ 96.995102][ T822] 5.10.0+ torvalds#819 Not tainted [ 96.995927][ T822] -------------------------------------------- [ 96.997091][ T822] ping/822 is trying to acquire lock: [ 96.998083][ T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 96.999813][ T822] [ 96.999813][ T822] but task is already holding lock: [ 97.001192][ T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.002908][ T822] [ 97.002908][ T822] other info that might help us debug this: [ 97.004401][ T822] Possible unsafe locking scenario: [ 97.004401][ T822] [ 97.005784][ T822] CPU0 [ 97.006407][ T822] ---- [ 97.007010][ T822] lock(_xmit_NONE#2); [ 97.007779][ T822] lock(_xmit_NONE#2); [ 97.008550][ T822] [ 97.008550][ T822] *** DEADLOCK *** [ 97.008550][ T822] [ 97.010057][ T822] May be due to missing lock nesting notation [ 97.010057][ T822] [ 97.011594][ T822] 7 locks held by ping/822: [ 97.012426][ T822] #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00 [ 97.014191][ T822] #1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.016045][ T822] #2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.017897][ T822] #3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.019684][ T822] #4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp] [ 97.021573][ T822] #5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.023424][ T822] #6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.025259][ T822] [ 97.025259][ T822] stack backtrace: [ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ torvalds#819 [ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 97.029407][ T822] Call Trace: [ 97.030015][ T822] dump_stack+0x99/0xcb [ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9 [ 97.031773][ T822] ? stack_trace_save+0x81/0xa0 [ 97.032661][ T822] ? register_lock_class+0x1910/0x1910 [ 97.033673][ T822] ? register_lock_class+0x1910/0x1910 [ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0 [ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 97.036690][ T822] lock_acquire+0x1b2/0x730 [ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.038466][ T822] ? check_flags+0x50/0x50 [ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0 [ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10 [ 97.041151][ T822] _raw_spin_lock+0x30/0x70 [ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960 [ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290 [ 97.044824][ T822] ? mark_held_locks+0xb7/0x120 [ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0 [ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120 [ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.052443][ T822] ? check_chain_key+0x244/0x5f0 [ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0 [ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020 [ 97.055263][ T822] ? pneigh_lookup+0x410/0x410 [ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020 [ ... ] Acked-by: Guillaume Nault <[email protected]> Fixes: 571912c ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

We had kernel panic, it is caused by unload module and last close confirmation. call trace: [1196029.743127] free_sess+0x15/0x50 [rtrs_client] [1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client] [1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client] [1196029.743130] close_rtrs+0x25/0x50 [rnbd_client] [1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client] [1196029.743132] __x64_sys_delete_module+0x190/0x260 And in the crashdump confirmation kworker is also running. PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2" #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891 #1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98 #2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938 #3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7 #4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e #5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client] #6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client] #7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client] #8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client] #9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client] The problem is both code path try to close same session, which lead to panic. To fix it, just skip the sess if the refcount already drop to 0. Fixes: f7a7a5c ("block/rnbd: client: main functionality") Signed-off-by: Jack Wang <[email protected]> Reviewed-by: Gioh Kim <[email protected]> Signed-off-by: Jens Axboe <[email protected]>

Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 MIPS#16 do_syscall_64 at ffffffffa4a052eb MIPS#17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes MIPS#16 normal_work_helper at ffffffffc03b706c MIPS#17 process_one_work at ffffffffa4aba4e4 MIPS#18 worker_thread at ffffffffa4aba6fd MIPS#19 kthread at ffffffffa4ac0a3d MIPS#20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: David Sterba <[email protected]>

I met below warning when cating a small size(about 80bytes) txt file on 9pfs(msize=2097152 is passed to 9p mount option), the reason is we miss iov_iter_advance() if the read count is 0 for zerocopy case, so we didn't truncate the pipe, then iov_iter_pipe() thinks the pipe is full. Fix it by removing the exception for 0 to ensure to call iov_iter_advance() even on empty read for zerocopy case. [ 8.279568] WARNING: CPU: 0 PID: 39 at lib/iov_iter.c:1203 iov_iter_pipe+0x31/0x40 [ 8.280028] Modules linked in: [ 8.280561] CPU: 0 PID: 39 Comm: cat Not tainted 5.11.0+ #6 [ 8.281260] RIP: 0010:iov_iter_pipe+0x31/0x40 [ 8.281974] Code: 2b 42 54 39 42 5c 76 22 c7 07 20 00 00 00 48 89 57 18 8b 42 50 48 c7 47 08 b [ 8.283169] RSP: 0018:ffff888000cbbd80 EFLAGS: 00000246 [ 8.283512] RAX: 0000000000000010 RBX: ffff888000117d00 RCX: 0000000000000000 [ 8.283876] RDX: ffff88800031d600 RSI: 0000000000000000 RDI: ffff888000cbbd90 [ 8.284244] RBP: ffff888000cbbe38 R08: 0000000000000000 R09: ffff8880008d2058 [ 8.284605] R10: 0000000000000002 R11: ffff888000375510 R12: 0000000000000050 [ 8.284964] R13: ffff888000cbbe80 R14: 0000000000000050 R15: ffff88800031d600 [ 8.285439] FS: 00007f24fd8af600(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 8.285844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.286150] CR2: 00007f24fd7d7b90 CR3: 0000000000c97000 CR4: 00000000000406b0 [ 8.286710] Call Trace: [ 8.288279] generic_file_splice_read+0x31/0x1a0 [ 8.289273] ? do_splice_to+0x2f/0x90 [ 8.289511] splice_direct_to_actor+0xcc/0x220 [ 8.289788] ? pipe_to_sendpage+0xa0/0xa0 [ 8.290052] do_splice_direct+0x8b/0xd0 [ 8.290314] do_sendfile+0x1ad/0x470 [ 8.290576] do_syscall_64+0x2d/0x40 [ 8.290818] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 8.291409] RIP: 0033:0x7f24fd7dca0a [ 8.292511] Code: c3 0f 1f 80 00 00 00 00 4c 89 d2 4c 89 c6 e9 bd fd ff ff 0f 1f 44 00 00 31 8 [ 8.293360] RSP: 002b:00007ffc20932818 EFLAGS: 00000206 ORIG_RAX: 0000000000000028 [ 8.293800] RAX: ffffffffffffffda RBX: 0000000001000000 RCX: 00007f24fd7dca0a [ 8.294153] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000001 [ 8.294504] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 8.294867] R10: 0000000001000000 R11: 0000000000000206 R12: 0000000000000003 [ 8.295217] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 [ 8.295782] ---[ end trace 63317af81b3ca24b ]--- Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. # perf test -v 4 4: Read samples using the mmap interface : --- start --- test child forked, pid 139782 mmap size 528384B ================================================================= ==139782==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55 #6 0x564ba1e278fb in run_test tests/builtin-test.c:428 #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458 #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679 #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825 #10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Read samples using the mmap interface: FAILED! failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Alexander Shishkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 24 24: Number of exit events of a simple workload : --- start --- test child forked, pid 145915 mmap size 528384B ================================================================= ==145915==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63 #3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74 #4 0x561cf4d798fb in run_test tests/builtin-test.c:428 #5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458 #6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679 #7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825 #8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Number of exit events of a simple workload: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 25 25: Software clock events period values : --- start --- test child forked, pid 149154 mmap size 528384B mmap size 528384B ================================================================= ==149154==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63 #3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65 #4 0x56260d26d8fb in run_test tests/builtin-test.c:428 #5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458 #6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679 #7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825 #8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Software clock events period values : FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 MIPS#16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 MIPS#17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 MIPS#18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 MIPS#19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 MIPS#20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. $ perf test -v 28 28: Use a dummy software event to keep tracking: --- start --- test child forked, pid 156810 mmap size 528384B ================================================================= ==156810==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84 #6 0x55cc625e38fb in run_test tests/builtin-test.c:428 #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458 #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679 #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825 #10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Use a dummy software event to keep tracking: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist and cpu/thread maps should be released together. Otherwise the following error was reported by Asan. $ perf test -v 35 35: Track with sched_switch : --- start --- test child forked, pid 159287 Using CPUID GenuineIntel-6-8E-C mmap size 528384B 1295 events recorded ================================================================= ==159287==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350 #6 0x5652f56e18fb in run_test tests/builtin-test.c:428 #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458 #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679 #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825 #10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Track with sched_switch: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It missed to call perf_thread_map__put() after using the map. $ perf test -v 43 43: Synthesize thread map : --- start --- test child forked, pid 162640 ================================================================= ==162640==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46 #3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97 #4 0x563e6d27d8fb in run_test tests/builtin-test.c:428 #5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458 #6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679 #7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825 #8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Synthesize thread map: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It should be released after printing the map. $ perf test -v 52 52: Print cpu map : --- start --- test child forked, pid 172233 ================================================================= ==172233==ERROR: LeakSanitizer: detected memory leaks Direct leak of 156 byte(s) in 1 object(s) allocated from: #0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237 #3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102 #4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120 #5 0x55e63afff8fb in run_test tests/builtin-test.c:428 #6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458 #7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679 #8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825 #9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s). test child finished with 1 ---- end ---- Print cpu map: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It should release the maps at the end. $ perf test -v 71 71: Convert perf time to TSC : --- start --- test child forked, pid 178744 mmap size 528384B 1st event perf time 59207256505278 tsc 13187166645142 rdtsc time 59207256542151 tsc 13187166723020 2nd event perf time 59207256543749 tsc 13187166726393 ================================================================= ==178744==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73 #6 0x55b6209828fb in run_test tests/builtin-test.c:428 #7 0x55b6209828fb in test_and_print tests/builtin-test.c:458 #8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679 #9 0x55b620984a53 in cmd_test tests/builtin-test.c:825 #10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Convert perf time to TSC: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

I got a segfault when using -r option with event groups. The option makes it run the workload multiple times and it will reuse the evlist and evsel for each run. While most of resources are allocated and freed properly, the id hash in the evlist was not and it resulted in the bug. You can see it with the address sanitizer like below: $ perf stat -r 100 -e '{cycles,instructions}' true ================================================================= ==693052==ERROR: AddressSanitizer: heap-use-after-free on address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8 WRITE of size 8 at 0x6080000003d0 thread T0 #0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644 #1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237 #2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244 #3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285 #4 0x558c5747733e in store_evsel_ids util/evsel.c:2765 #5 0x558c5747733e in evsel__store_ids util/evsel.c:2782 #6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895 #7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014 #8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446 #9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308 #14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9) Actually the nodes in the hash table are struct perf_stream_id and they were freed in the previous run. Fix it by resetting the hash. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 MIPS#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 MIPS#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 MIPS#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 MIPS#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 MIPS#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 MIPS#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 MIPS#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 MIPS#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

For each device, the nosy driver allocates a pcilynx structure. A use-after-free might happen in the following scenario: 1. Open nosy device for the first time and call ioctl with command NOSY_IOC_START, then a new client A will be malloced and added to doubly linked list. 2. Open nosy device for the second time and call ioctl with command NOSY_IOC_START, then a new client B will be malloced and added to doubly linked list. 3. Call ioctl with command NOSY_IOC_START for client A, then client A will be readded to the doubly linked list. Now the doubly linked list is messed up. 4. Close the first nosy device and nosy_release will be called. In nosy_release, client A will be unlinked and freed. 5. Close the second nosy device, and client A will be referenced, resulting in UAF. The root cause of this bug is that the element in the doubly linked list is reentered into the list. Fix this bug by adding a check before inserting a client. If a client is already in the linked list, don't insert it. The following KASAN report reveals it: BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210 Write of size 8 at addr ffff888102ad7360 by task poc CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: nosy_release+0x1ea/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 337: nosy_open+0x154/0x4d0 misc_open+0x2ec/0x410 chrdev_open+0x20d/0x5a0 do_dentry_open+0x40f/0xe80 path_openat+0x1cf9/0x37b0 do_filp_open+0x16d/0x390 do_sys_openat2+0x11d/0x360 __x64_sys_open+0xfd/0x1a0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 337: kfree+0x8f/0x210 nosy_release+0x158/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380) [ Modified to use 'list_empty()' inside proper lock - Linus ] Link: https://lore.kernel.org/lkml/[email protected]/ Reported-and-tested-by: 马哲宇 (Zheyu Ma) <[email protected]> Signed-off-by: Zheyu Ma <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Stefan Richter <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [[email protected]: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Wengang Wang <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

ASan reported a memory leak caused by info_linear not being deallocated. The info_linear was allocated during in perf_event__synthesize_one_bpf_prog(). This patch adds the corresponding free() when bpf_prog_info_node is freed in perf_env__purge_bpf(). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 7688 byte(s) in 19 object(s) allocated from: #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f) #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16 #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16 #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9 #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8 #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8 #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8 #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16 Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Yonghong Song <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 MIPS#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 MIPS#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 MIPS#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 #1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 #2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 #3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 #4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 #5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 #6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 #7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 #8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 #9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

This was missed in c3ed222 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.") and causes a panic when mounting with '-o trunkdiscovery': PID: 1604 TASK: ffff93dac3520000 CPU: 3 COMMAND: "mount.nfs" #0 [ffffb79140f738f8] machine_kexec at ffffffffaec64bee #1 [ffffb79140f73950] __crash_kexec at ffffffffaeda67fd #2 [ffffb79140f73a18] crash_kexec at ffffffffaeda76ed #3 [ffffb79140f73a30] oops_end at ffffffffaec2658d #4 [ffffb79140f73a50] general_protection at ffffffffaf60111e [exception RIP: nfs_fattr_init+0x5] RIP: ffffffffc0c18265 RSP: ffffb79140f73b08 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff93dac304a800 RCX: 0000000000000000 RDX: ffffb79140f73bb0 RSI: ffff93dadc8cbb40 RDI: d03ee11cfaf6bd50 RBP: ffffb79140f73be8 R8: ffffffffc0691560 R9: 0000000000000006 R10: ffff93db3ffd3df8 R11: 0000000000000000 R12: ffff93dac4040000 R13: ffff93dac2848e00 R14: ffffb79140f73b60 R15: ffffb79140f73b30 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffb79140f73b08] _nfs41_proc_get_locations at ffffffffc0c73d53 [nfsv4] #6 [ffffb79140f73bf0] nfs4_proc_get_locations at ffffffffc0c83e90 [nfsv4] #7 [ffffb79140f73c60] nfs4_discover_trunking at ffffffffc0c83fb7 [nfsv4] #8 [ffffb79140f73cd8] nfs_probe_fsinfo at ffffffffc0c0f95f [nfs] #9 [ffffb79140f73da0] nfs_probe_server at ffffffffc0c1026a [nfs] RIP: 00007f6254fce26e RSP: 00007ffc69496ac8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f6254fce26e RDX: 00005600220a82a0 RSI: 00005600220a64d0 RDI: 00005600220a6520 RBP: 00007ffc69496c50 R8: 00005600220a8710 R9: 003035322e323231 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc69496c50 R13: 00005600220a8440 R14: 0000000000000010 R15: 0000560020650ef9 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b Fixes: c3ed222 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.") Signed-off-by: Scott Mayhew <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>

…tion Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Mukesh Ojha <[email protected]> Reported-by: shisiyuan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: https://www.spinics.net/lists/cgroups/msg33313.html Fixes: f817de9 ("cgroup: prepare migration path for unified hierarchy") Cc: [email protected] # v3.16+

@lip

KASAN reported a UAF bug when I was running xfs/235: BUG: KASAN: use-after-free in xlog_recover_process_intents+0xa77/0xae0 [xfs] Read of size 8 at addr ffff88804391b360 by task mount/5680 CPU: 2 PID: 5680 Comm: mount Not tainted 6.0.0-xfsx #6.0.0 77e7b52a4943a975441e5ac90a5ad7748b7867f6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x2cc/0x682 kasan_report+0xa3/0x120 xlog_recover_process_intents+0xa77/0xae0 [xfs fb841c7180aad3f8359438576e27867f5795667e] xlog_recover_finish+0x7d/0x970 [xfs fb841c7180aad3f8359438576e27867f5795667e] xfs_log_mount_finish+0x2d7/0x5d0 [xfs fb841c7180aad3f8359438576e27867f5795667e] xfs_mountfs+0x11d4/0x1d10 [xfs fb841c7180aad3f8359438576e27867f5795667e] xfs_fs_fill_super+0x13d5/0x1a80 [xfs fb841c7180aad3f8359438576e27867f5795667e] get_tree_bdev+0x3da/0x6e0 vfs_get_tree+0x7d/0x240 path_mount+0xdd3/0x17d0 __x64_sys_mount+0x1fa/0x270 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff5bc069eae Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 1f 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe433fd448 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5bc069eae RDX: 00005575d7213290 RSI: 00005575d72132d0 RDI: 00005575d72132b0 RBP: 00005575d7212fd0 R08: 00005575d7213230 R09: 00005575d7213fe0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00005575d7213290 R14: 00005575d72132b0 R15: 00005575d7212fd0 </TASK> Allocated by task 5680: kasan_save_stack+0x1e/0x40 __kasan_slab_alloc+0x66/0x80 kmem_cache_alloc+0x152/0x320 xfs_rui_init+0x17a/0x1b0 [xfs] xlog_recover_rui_commit_pass2+0xb9/0x2e0 [xfs] xlog_recover_items_pass2+0xe9/0x220 [xfs] xlog_recover_commit_trans+0x673/0x900 [xfs] xlog_recovery_process_trans+0xbe/0x130 [xfs] xlog_recover_process_data+0x103/0x2a0 [xfs] xlog_do_recovery_pass+0x548/0xc60 [xfs] xlog_do_log_recovery+0x62/0xc0 [xfs] xlog_do_recover+0x73/0x480 [xfs] xlog_recover+0x229/0x460 [xfs] xfs_log_mount+0x284/0x640 [xfs] xfs_mountfs+0xf8b/0x1d10 [xfs] xfs_fs_fill_super+0x13d5/0x1a80 [xfs] get_tree_bdev+0x3da/0x6e0 vfs_get_tree+0x7d/0x240 path_mount+0xdd3/0x17d0 __x64_sys_mount+0x1fa/0x270 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 5680: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x144/0x1b0 slab_free_freelist_hook+0xab/0x180 kmem_cache_free+0x1f1/0x410 xfs_rud_item_release+0x33/0x80 [xfs] xfs_trans_free_items+0xc3/0x220 [xfs] xfs_trans_cancel+0x1fa/0x590 [xfs] xfs_rui_item_recover+0x913/0xd60 [xfs] xlog_recover_process_intents+0x24e/0xae0 [xfs] xlog_recover_finish+0x7d/0x970 [xfs] xfs_log_mount_finish+0x2d7/0x5d0 [xfs] xfs_mountfs+0x11d4/0x1d10 [xfs] xfs_fs_fill_super+0x13d5/0x1a80 [xfs] get_tree_bdev+0x3da/0x6e0 vfs_get_tree+0x7d/0x240 path_mount+0xdd3/0x17d0 __x64_sys_mount+0x1fa/0x270 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff88804391b300 which belongs to the cache xfs_rui_item of size 688 The buggy address is located 96 bytes inside of 688-byte region [ffff88804391b300, ffff88804391b5b0) The buggy address belongs to the physical page: page:ffffea00010e4600 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888043919320 pfn:0x43918 head:ffffea00010e4600 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4fff80000010200(slab|head|node=1|zone=1|lastcpupid=0xfff) raw: 04fff80000010200 0000000000000000 dead000000000122 ffff88807f0eadc0 raw: ffff888043919320 0000000080140010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804391b200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88804391b280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88804391b300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88804391b380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88804391b400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The test fuzzes an rmap btree block and starts writer threads to induce a filesystem shutdown on the corrupt block. When the filesystem is remounted, recovery will try to replay the committed rmap intent item, but the corruption problem causes the recovery transaction to fail. Cancelling the transaction frees the RUD, which frees the RUI that we recovered. When we return to xlog_recover_process_intents, @lip is now a dangling pointer, and we cannot use it to find the iop_recover method for the tracepoint. Hence we must store the item ops before calling ->iop_recover if we want to give it to the tracepoint so that the trace data will tell us exactly which intent item failed. Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>

test_bpf tail call tests end up as: test_bpf: #0 Tail call leaf jited:1 85 PASS test_bpf: #1 Tail call 2 jited:1 111 PASS test_bpf: #2 Tail call 3 jited:1 145 PASS test_bpf: #3 Tail call 4 jited:1 170 PASS test_bpf: #4 Tail call load/store leaf jited:1 190 PASS test_bpf: #5 Tail call load/store jited:1 BUG: Unable to handle kernel data access on write at 0xf1b4e000 Faulting instruction address: 0xbe86b710 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: test_bpf(+) CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ torvalds#195 Hardware name: PowerMac3,1 750CL 0x87210 PowerMac NIP: be86b710 LR: be857e88 CTR: be86b704 REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000 DAR: f1b4e000 DSISR: 42000000 GPR00: 00000001 f1b4dfe c11d2280 00000000 00000000 00000000 00000002 00000000 GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8 GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000 GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00 NIP [be86b710] 0xbe86b710 LR [be857e88] __run_one+0xec/0x264 [test_bpf] Call Trace: [f1b4dfe] [00000002] 0x2 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- This is a tentative to write above the stack. The problem is encoutered with tests added by commit 38608ee ("bpf, tests: Add load store test case for tail call") This happens because tail call is done to a BPF prog with a different stack_depth. At the time being, the stack is kept as is when the caller tail calls its callee. But at exit, the callee restores the stack based on its own properties. Therefore here, at each run, r1 is erroneously increased by 32 - 16 = 16 bytes. This was done that way in order to pass the tail call count from caller to callee through the stack. As powerpc32 doesn't have a red zone in the stack, it was necessary the maintain the stack as is for the tail call. But it was not anticipated that the BPF frame size could be different. Let's take a new approach. Use register r4 to carry the tail call count during the tail call, and save it into the stack at function entry if required. This means the input parameter must be in r3, which is more correct as it is a 32 bits parameter, then tail call better match with normal BPF function entry, the down side being that we move that input parameter back and forth between r3 and r4. That can be optimised later. Doing that also has the advantage of maximising the common parts between tail calls and a normal function exit. With the fix, tail call tests are now successfull: test_bpf: #0 Tail call leaf jited:1 53 PASS test_bpf: #1 Tail call 2 jited:1 115 PASS test_bpf: #2 Tail call 3 jited:1 154 PASS test_bpf: #3 Tail call 4 jited:1 165 PASS test_bpf: #4 Tail call load/store leaf jited:1 101 PASS test_bpf: #5 Tail call load/store jited:1 141 PASS test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] Suggested-by: Naveen N. Rao <[email protected]> Fixes: 51c66ad ("powerpc/bpf: Implement extended BPF on PPC32") Cc: [email protected] Signed-off-by: Christophe Leroy <[email protected]> Tested-by: Naveen N. Rao <[email protected] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/757acccb7fbfc78efa42dcf3c974b46678198905.1669278887.git.christophe.leroy@csgroup.eu

In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... Cc: Felipe Balbi <[email protected]> Cc: Lorenzo Colitti <[email protected]> Cc: Carlos Llamas <[email protected]> Cc: [email protected] Signed-off-by: Maciej Żenczykowski <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

During EEH error injection testing, a deadlock was encountered in the tg3 driver when tg3_io_error_detected() was attempting to cancel outstanding reset tasks: crash> foreach UN bt ... PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd" ... #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3] #7 [c00000000681faf0] eeh_report_error at c00000000004e25c ... PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1" ... #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c00000003721fc60] process_one_work at c00000000019e5c4 ... PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1" ... #4 [c000000037247bc0] rtnl_lock at c000000000c940d8 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3] #6 [c000000037247c60] process_one_work at c00000000019e5c4 ... PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2" ...:1 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c0000000373ebc60] process_one_work at c00000000019e5c4 ... Code inspection shows that both tg3_io_error_detected() and tg3_reset_task() attempt to acquire the RTNL lock at the beginning of their code blocks. If tg3_reset_task() should happen to execute between the times when tg3_io_error_deteced() acquires the RTNL lock and tg3_reset_task_cancel() is called, a deadlock will occur. Moving tg3_reset_task_cancel() call earlier within the code block, prior to acquiring RTNL, prevents this from happening, but also exposes another deadlock issue where tg3_reset_task() may execute AFTER tg3_io_error_detected() has executed: crash> foreach UN bt PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd" ... #4 [c000000006867a60] rtnl_lock at c000000000c940d8 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3] #6 [c000000006867b00] eeh_report_reset at c00000000004de88 ... PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1" ... #3 [c000000036c1bb70] msleep at c000000000259e6c #4 [c000000036c1bba0] napi_disable at c000000000c6b848 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3] #6 [c000000036c1bc60] process_one_work at c00000000019e5c4 ... This issue can be avoided by aborting tg3_reset_task() if EEH error recovery is already in progress. Fixes: db84bf4 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize") Signed-off-by: David Christensen <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] MIPS#16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

…l/git/netfilter/nf Florisn Westphal says: ==================== These are netfilter fixes for the *net* tree. First patch resolves a false-positive lockdep splat: rcu_dereference is used outside of rcu read lock. Let lockdep validate that the transaction mutex is locked. Second patch fixes a kdoc warning added in previous PR. Third patch fixes a memory leak: The catchall element isn't disabled correctly, this allows userspace to deactivate the element again. This results in refcount underflow which in turn prevents memory release. This was always broken since the feature was added in 5.13. Patch 4 fixes an incorrect change in the previous pull request: Adding a duplicate key to a set should work if the duplicate key has expired, restore this behaviour. All from myself. Patch #5 resolves an old historic artifact in sctp conntrack: a 300ms timeout for shutdown_ack. Increase this to 3s. From Xin Long. Patch #6 fixes a sysctl data race in ipvs, two threads can clobber the sysctl value, from Sishuai Gong. This is a day-0 bug that predates git history. Patches 7, 8 and 9, from Pablo Neira Ayuso, are also followups for the previous GC rework in nf_tables: The netlink notifier and the netns exit path must both increment the gc worker seqcount, else worker may encounter stale (free'd) pointers. ================ Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit 99d4850 ] Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 OpenDingux#2 0x556701d70589 in perf_env__cpuid util/env.c:465 OpenDingux#3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 OpenDingux#4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 OpenDingux#5 0x556701d8f78b in evsel__config util/evsel.c:1366 OpenDingux#6 0x556701ef5872 in evlist__config util/record.c:108 OpenDingux#7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 OpenDingux#8 0x556701cacd07 in run_test tests/builtin-test.c:236 OpenDingux#9 0x556701cacfac in test_and_print tests/builtin-test.c:265 OpenDingux#10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 OpenDingux#11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 OpenDingux#12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 OpenDingux#13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 OpenDingux#14 0x556701d3be90 in run_argv tools/perf/perf.c:421 OpenDingux#15 0x556701d3c3f8 in main tools/perf/perf.c:537 MIPS#16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b684c09 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 OpenDingux#2 0x0000000000000063 in ?? () OpenDingux#3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 OpenDingux#2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 OpenDingux#3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 OpenDingux#4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 OpenDingux#5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 OpenDingux#6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 OpenDingux#7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 OpenDingux#8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 OpenDingux#9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 OpenDingux#10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 OpenDingux#11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <[email protected]> Fixes: d16a58f ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 #6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 #7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 #8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 #9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 #10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 #11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 #12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 #13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 #14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 #15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 MIPS#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 MIPS#17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Kan Liang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] MIPS#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 MIPS#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] MIPS#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] MIPS#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 MIPS#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

A skcipher_request object is made up of struct skcipher_request followed by a variable-sized trailer. The allocation of the skcipher_request and IV in crypt_iv_eboiv_gen is missing the memory for struct skcipher_request. Fix it by adding it to reqsize. Fixes: e302309 ("dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE") Cc: <[email protected]> #6.5+ Reported-by: Tatu Heikkilä <[email protected]> Reviewed-by: Mike Snitzer <[email protected]> Signed-off-by: Herbert Xu <[email protected]>

…te_call_indirect kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate indirect calls. However, int3_emulate_call always assumes the size of the call to be 5 bytes when calculating the return address. This is incorrect for register-based indirect calls in x86, which can be either 2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime, the incorrect return address causes control flow to land onto the wrong place after return -- possibly not a valid instruction boundary. This can lead to a panic like the following: [ 7.308204][ C1] BUG: unable to handle page fault for address: 000000000002b4d8 [ 7.308883][ C1] #PF: supervisor read access in kernel mode [ 7.309168][ C1] #PF: error_code(0x0000) - not-present page [ 7.309461][ C1] PGD 0 P4D 0 [ 7.309652][ C1] Oops: 0000 [OpenDingux#1] SMP [ 7.309929][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next OpenDingux#6 [ 7.310397][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 7.311068][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.311349][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.312512][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.312899][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.313334][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.313702][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.314146][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.314509][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.314951][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.315396][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.315691][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.316153][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.316508][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.316948][ C1] Call Trace: [ 7.317123][ C1] <IRQ> [ 7.317279][ C1] ? __die_body+0x64/0xb0 [ 7.317482][ C1] ? page_fault_oops+0x248/0x370 [ 7.317712][ C1] ? __wake_up+0x96/0xb0 [ 7.317964][ C1] ? exc_page_fault+0x62/0x130 [ 7.318211][ C1] ? asm_exc_page_fault+0x22/0x30 [ 7.318444][ C1] ? __cfi_native_send_call_func_single_ipi+0x10/0x10 [ 7.318860][ C1] ? default_idle+0xb/0x10 [ 7.319063][ C1] ? __common_interrupt+0x52/0xc0 [ 7.319330][ C1] common_interrupt+0x78/0x90 [ 7.319546][ C1] </IRQ> [ 7.319679][ C1] <TASK> [ 7.319854][ C1] asm_common_interrupt+0x22/0x40 [ 7.320082][ C1] RIP: 0010:default_idle+0xb/0x10 [ 7.320309][ C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9 [ 7.321449][ C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256 [ 7.321808][ C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c [ 7.322227][ C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c [ 7.322656][ C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2 [ 7.323083][ C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000 [ 7.323530][ C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000 [ 7.323948][ C1] ? __cfi_lapic_next_deadline+0x10/0x10 [ 7.324239][ C1] default_idle_call+0x31/0x50 [ 7.324464][ C1] do_idle+0xd3/0x240 [ 7.324690][ C1] cpu_startup_entry+0x25/0x30 [ 7.324983][ C1] start_secondary+0xb4/0xc0 [ 7.325217][ C1] secondary_startup_64_no_verify+0x179/0x17b [ 7.325498][ C1] </TASK> [ 7.325641][ C1] Modules linked in: [ 7.325906][ C1] CR2: 000000000002b4d8 [ 7.326104][ C1] ---[ end trace 0000000000000000 ]--- [ 7.326354][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.326614][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.327570][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.327910][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.328273][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.328632][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.329223][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.329780][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.330193][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.330632][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.331050][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.331454][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.331854][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.332236][ C1] Kernel panic - not syncing: Fatal exception in interrupt [ 7.332730][ C1] Kernel Offset: disabled [ 7.333044][ C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- The relevant assembly code is (from objdump, faulting address highlighted): ffffffff8102ed9d: 41 ff d3 call *%r11 ffffffff8102eda0: 65 48 <8b> 05 30 c7 ff mov %gs:0x7effc730(%rip),%rax The emulation incorrectly sets the return address to be ffffffff8102ed9d + 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next mov. This in turn causes incorrect subsequent instruction decoding and eventually triggers the page fault above. Instead of invoking int3_emulate_call, perform push and jmp emulation directly in kprobe_emulate_call_indirect. At this point we can obtain the instruction size from p->ainsn.size so that we can calculate the correct return address. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 6256e66 ("x86/kprobes: Use int3 instead of debug trap for single-step") Cc: [email protected] Signed-off-by: Jinghao Jia <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>

citral23 added 2 commits October 19, 2020 12:33

Delete panel-sharp-y030xx067a.c

c8864e6

Add files via upload

f2f0bbc

citral23 closed this Oct 19, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Y030xx067a #6

Y030xx067a #6

citral23 commented Oct 19, 2020

Y030xx067a #6

Y030xx067a #6

Conversation

citral23 commented Oct 19, 2020