Point One Navigation Polaris Service

This repo provides C and C++ libraries for interacting with the Point One Navigation Polaris Service to receive GNSS RTK corrections. Compatible GNSS receivers can achieve better than 10 cm accuracy when used with the service.

Polaris corrections are distributed using the RTCM 10403 standard. They may be used with a Point One Atlas device, or with any RTCM-compatible GNSS receiver (currently tested with Septentrio, Novatel, and u-Blox receivers).

Documentation on the protocol used by the Polaris Service can be found at https://pointonenav.github.io/docs.

Polaris API Key and Unique ID

To establish a connection, you must provide a valid Polaris API key. You can easily get one at https://app.pointonenav.com.

Each time you connect to Polaris, you must provide both your assigned API key. Unique IDs are an optional string used to identify the connection and must be unique across all Polaris sessions using your API key.

Important: if two connections use the same unique ID, they will conflict and will not work correctly.

Unique IDs have the following requirements:

Maximum of 36 characters long
A mixture of uppercase and lowercase letters and numbers
May include the following special characters: - and _

Polaris C Client

Requirements

Bazel 3.6+, or CMake 3.6+ and GNU Make
- Note: CMake 3.18 or newer required when including the C library using FetchContent_Declare()
OpenSSL or BoringSSL (optional; required for TLS support (strongly recommended))

Installation

The Polaris C Client can be built with Bazel, CMake, or GNU Make. Follow the instructions below for build system of your choice.

CMake

Install Requirements

Before building the Polaris C Client library, you must install the following requirements:

sudo apt install libssl-dev

OpenSSL (libssl-dev) is required by default and strongly recommended, but may be disabled by specifying -DPOLARIS_ENABLE_TLS=OFF to the cmake command below.

Including In Your CMake Project

To include this library as part of your CMake project, we recommend using the CMake FetchContent feature as shown below, rather than compiling and installing the library manually as in the sections above:

# Download the specified version of the FusionEngine client library and make it
# available.
include(FetchContent)
FetchContent_Declare(
    polaris
    GIT_REPOSITORY https://github.com/PointOneNav/polaris.git
    GIT_TAG v1.3.1
    SOURCE_SUBDIR c
)
set(POLARIS_BUILD_EXAMPLES OFF CACHE INTERNAL "")
FetchContent_MakeAvailable(polaris)

# Define your application and add a dependency for the Polaris client C library.
add_executable(example_app main.c)
target_link_libraries(example_app PUBLIC polaris_client)

Note that the SOURCE_SUBDIR argument tells CMake to include only the Polaris client C library. This argument was introduced in CMake 3.18, so you must use CMake 3.18 or newer when building a C-only project.

Note that we strongly recommend using a specific version of the library in your code by specifying a git tag (e.g., GIT_TAG v1.3.1), and updating that as new versions are released. That way, you can be sure that your code is always built with a known version of Polaris client. If you prefer, however, you can tell CMake to track the latest changes by using GIT_TAG master instead.

See c/examples/external_cmake_project/CMakeLists.txt for more details.

Compiling From Source

Use the following steps to compile and install the Polaris C Client library using CMake:

mkdir c/build
cd c/build
cmake ..
make
sudo make install

This will generate libpolaris_client.so, and install the library and header files on your system. By default, this will also build the example applications. You can disable the example applications by specifying cmake -DPOLARIS_BUILD_EXAMPLES=OFF ...

Bazel

Including In Your Bazel Project

To use this library in an existing Bazel project, add the following to your project's WORKSPACE file:

git_repository(
    name = "polaris",
    remote = "[email protected]:PointOneNav/polaris.git",
    tag = "v1.3.1",
)

Note that we strongly recommend using a specific version of the library in your code by specifying a git tag (e.g., tag = "v1.3.1"), and updating that as new versions are released. That way, you can be sure that your code is always built with a known version of fusion-engine-client. If you prefer, however, you can tell Bazel to track the latest changes by using branch = "master" instead.

After declaring the repository in your WORKSPACE file, you can add the following dependency to any cc_library() or cc_binary() definitions in your project's BAZEL files:

cc_binary(
    name = "my_application",
    srcs = ["main.cc"],
    deps = ["@_polaris//c:polaris_client"],
)

The polaris_client target enables TLS support by default, which is strongly recommended. If necessary, you can use the polaris_client_no_tls target to connect without TLS, or specify --//c:polaris_enable_tls=False to Bazel on the command line.

Note that you do not need to manually clone the Polaris repository when including it in your Bazel application. Bazel will clone it automatically when you build your application.

Compiling From Source

In general, it is strongly recommended that you let Bazel import and compile the library using git_repository() as shown above. However, if you would like to compile the example applications, you can run the following command:

bazel build -c opt //c/examples:*

The generated example applications will be stored within the Bazel cache directory (bazel-bin/examples/<APPLICATION_NAME>). You may run them directly from the bazel-bin/ directory if you wish, but they are more commonly run using the bazel run command. For example, to run the Simple Polaris Client example application, run the following:

bazel run -c opt //c/examples:simple_polaris_client -- <POLARIS_API_KEY> [<UNIQUE_ID>]

See Simple Polaris Client for more details.

GNU Make

Note: The C client does not currently have any external dependencies.

Clone the Polaris source code and navigate to the c/ source directory:

git clone https://github.com/PointOneNav/polaris.git
cd polaris/c

Compile the Polaris source code and example applications:
```
make
```

The generated example applications will be located at examples/<APPLICATION NAME> in the current directory (polaris/c/). For example, to run the Simple Polaris Client example application, run the following:

./examples/simple_polaris_client <POLARIS_API_KEY> [<UNIQUE_ID>]

See Simple Polaris Client for more details.

Using Polaris C Client

Include polaris.h:
```
#include <point_one/polaris/polaris.h>
```
Create a PolarisContext_t context object, which contains the data send/receive buffers, socket for communicating with Polaris, and other configuration details.
```
PolarisContext_t context;
Polaris_Init(&context);
```
Authenticate with Polaris, providing your assigned API key and a unique ID for this connection instance. This will generate an authentication token, which will be used to receive corrections data.
```
Polaris_Authenticate(&context, api_key, unique_id);
```
- Note that the ID you specify must be unique across all Polaris sessions using your API key. If two connections use the same unique ID, they will conflict and will not work correctly.
- If you already have a valid authentication token that you wish to use, you can skip the authentication step by calling Polaris_SetAuthToken().

Provide a callback function, which will be called when new data is received.

void MyDataHandler(void* info, PolarisContext_t* context, const uint8_t* buffer, size_t size_bytes) {}

Polaris_SetRTCMCallback(&context, MyDataHandler, NULL);

Connect to the Polaris corrections stream using your authentication token.
```
Polaris_Connect(&context);
```
Send an initial receiver position to start receiving corrections for that location.
```
Polaris_SendLLAPosition(&context, 37.773971, -122.430996, -0.02);
```
Finally, call the run function, which will block indefinitely and receive data, calling the callback function you provided each time data is received.
```
Polaris_Run(&context, 30000);
```
When finished, call Polaris_Disconnect() from somewhere in your code to disconnect from Polaris and return from Polaris_Run().
```
Polaris_Disconnect(&context);
```
Finally, call Polaris_Free() to free memory held by the context.
```
Polaris_Free(&context);
```

If desired, you can use the Polaris_Work() function instead of Polaris_Run() to perform non-blocking data receive operations.

Example Applications

Simple Polaris Client

A small example of establishing a Polaris connection and receiving RTCM corrections data.

To run the application, run the following command:

bazel run //c/examples:simple_polaris_client -- <POLARIS_API_KEY> [<UNIQUE_ID>]

where <POLARIS_API_KEY> is the Polaris key assigned to you by Point One.

Connection Retry

An extension of the simple example, adding error detection and connection retry logic consistent with how Polaris might be used in a real-time application.

To run the application, run the following command:

bazel run //c/examples:connection_retry -- <POLARIS_API_KEY> [<UNIQUE_ID>]

where <POLARIS_API_KEY> is the Polaris key assigned to you by Point One.

Polaris C++ Client

Requirements

Bazel 3.6+, or CMake 3.6+ and GNU Make
Google gflags 2.2.2+
Google glog 0.4.0+
Boost 1.58+ (for building example applications only)
OpenSSL or BoringSSL (optional; required for TLS support (strongly recommended))

Installation

The Polaris C++ Client can be built with Bazel, or CMake. Follow the instructions below for build system of your choice.

CMake

Install Requirements

Before building the Polaris C++ Client library, you must install the following requirements:

sudo apt install libssl-dev libgflags-dev libgoogle-glog-dev libboost-all-dev

OpenSSL (libssl-dev) is required by default and strongly recommended, but may be disabled by specifying -DPOLARIS_ENABLE_TLS=OFF to the cmake command below.

Including In Your CMake Project

To include this library as part of your CMake project, we recommend using the CMake FetchContent feature as shown below, rather than compiling and installing the library manually as in the sections above:

# Download the specified version of the FusionEngine client library and make it
# available.
include(FetchContent)
FetchContent_Declare(
    polaris
    GIT_REPOSITORY https://github.com/PointOneNav/polaris.git
    GIT_TAG v1.3.1
)
set(POLARIS_BUILD_EXAMPLES OFF CACHE INTERNAL "")
FetchContent_MakeAvailable(polaris)

# Define your application and add a dependency for the Polaris client C library.
add_executable(example_app main.c)
target_link_libraries(example_app PUBLIC polaris_cpp_client)

Note that we strongly recommend using a specific version of the library in your code by specifying a git tag (e.g., GIT_TAG v1.3.1), and updating that as new versions are released. That way, you can be sure that your code is always built with a known version of Polaris client. If you prefer, however, you can tell CMake to track the latest changes by using GIT_TAG master instead.

See examples/external_cmake_project/CMakeLists.txt for more details.

Compiling From Source

Use the following steps to compile and install the Polaris C Client library using CMake:

mkdir build
cd build
cmake ..
make
sudo make install

This will generate libpolaris_cpp_client.so, and install the library and header files on your system. By default, this will also build the example applications. You can disable the example applications by specifying cmake -DPOLARIS_BUILD_EXAMPLES=OFF ...

Bazel

Including In Your Bazel Project

To use this library in an existing Bazel project, add the following to your project's WORKSPACE file:

git_repository(
    name = "polaris",
    remote = "[email protected]:PointOneNav/polaris.git",
    tag = "v1.3.1",
)

Note that we strongly recommend using a specific version of the library in your code by specifying a git tag (e.g., tag = "v1.3.1"), and updating that as new versions are released. That way, you can be sure that your code is always built with a known version of fusion-engine-client. If you prefer, however, you can tell Bazel to track the latest changes by using branch = "master" instead.

After declaring the repository in your WORKSPACE file, you can add the following dependency to any cc_library() or cc_binary() definitions in your project's BAZEL files:

cc_binary(
    name = "my_application",
    srcs = ["main.cc"],
    deps = ["@_polaris//:polaris_client"],
)

The polaris_client target enables TLS support by default, which is strongly recommended. If necessary, you can use the polaris_client_no_tls target to connect without TLS, or specify --//:polaris_enable_tls=False to Bazel on the command line.

Note that you do not need to manually clone the Polaris repository when including it in your Bazel application. Bazel will clone it automatically when you build your application.

Compiling From Source

In general, it is strongly recommended that you let Bazel import and compile the library using git_repository() as shown above. However, if you would like to compile the example applications, you can run the following command:

bazel build -c opt //examples:*

The generated example applications will be stored within the Bazel cache directory (bazel-bin/examples/<APPLICATION_NAME>). You may run them directly from the bazel-bin/ directory if you wish, but they are more commonly run using the bazel run command. For example, to run the Simple Polaris Client example application, run the following:

bazel run -c opt //examples:simple_polaris_cpp_client -- --polaris_api_key=<POLARIS_API_KEY>

See Simple Polaris Client for more details.

Cross-Compiling With Bazel

The Bazel build flow supports cross-compilation for 32- and 64-bit ARM architectures. To build for either architecture, specify the --config argument to Bazel with one of the following values:

armv7hf - 32-bit ARM v7 (e.g., Raspberry Pi v1/2/Zero)
aarch64 - 64-bit ARM (e.g., Raspberry Pi v3+, Nvidia Jetson/Pegasus, Variscite DART-MX8M-MINI)

For example:

bazel build --config=aarch64 //examples:simple_polaris_cpp_client

Building On Mac OS

The example applications can be built on Mac OS using CMake or Bazel and Clang. Assure that you have a C++ toolchain and the required libraries installed. These can be installed with Homebrew:

brew install cmake boost gflags glog

Note: When using CMake, you may need to use a directory other than build as there is a BUILD file in the root of the repo. The default Mac OS filesystem, HFS+, is not case-sensitive.

Using Polaris C++ Client

Include polaris_client.h:

#include <point_one/polaris/polaris_client.h>

using namespace point_one::polaris;

Create a PolarisClient object, specifying your assigned API key and a unique ID for this connection instance. These will be used for authentication when Run() is called below. The authentication process will generate an authentication token, which will be used to receive corrections data.
```
PolarisClient client(api_key, unique_id);
```
- Note that the ID you specify must be unique across all Polaris sessions using your API key. If two connections use the same unique ID, they will conflict and will not work correctly.
- If you already have a valid authentication token that you wish to use, you can skip the authentication step by calling SetAuthToken().

Provide a callback function, which will be called when new data is received.

void MyDataHandler(const uint8_t* buffer, size_t size_bytes) {}

client.SetRTCMCallback(MyDataHandler);

Set an initial receiver position to start receiving corrections for that location.
```
client.SendLLAPosition(&context, 37.773971, -122.430996, -0.02);
```
Finally, call the Run() function, which will block indefinitely and receive data, calling the callback function you provided each time data is received.
```
client.Run();
```
When finished, call Disconnect() from somewhere in your code to disconnect from Polaris and return from Run().
```
client.Disconnect();
```

The Run() function handles authentication, connecting to Polaris, sending position updates, and receiving data. It is also responsible for handling error conditions including automatically reconnecting or reauthenticating as needed.

If desired, you can use the RunAsync() function to launch Run() in a separate thread, returning control to your function immediately.

Example Applications

Simple Polaris Client

A small example of establishing a Polaris connection and receiving RTCM corrections data.

To run the application, run the following command:

bazel run //examples:simple_polaris_cpp_client -- --polaris_api_key=<POLARIS_API_KEY>

where <POLARIS_API_KEY> is the Polaris key assigned to you by Point One.

Generic Serial Receiver Example

This example relays incoming corrections data to a receiver over a serial connection. The receiver should be configured to send NMEA $GPGGA position updates over the connection. They will then be forwarded to Polaris to associate the receiver with an appropriate corrections stream.

Bazel

To run the application, run the following command:

bazel run //examples:serial_port_example -- --polaris_api_key=<POLARIS_API_KEY> --device=/dev/ttyACM0

where <POLARIS_API_KEY> is the Polaris key assigned to you by Point One.

CMake

CMake requires dependencies are installed ahead of time.

On Linux:

sudo apt install libssl-dev libgflags-dev libgoogle-glog-dev libboost-all-dev

mkdir build && cd build && cmake .. && make && \
./examples/serial_port_client \
    --polaris_api_key=<POLARIS_API_KEY> \
    --receiver_serial_baud 460800 \
    --receiver_serial_port=/dev/ttyACM0

where <POLARIS_API_KEY> is the Polaris key assigned to you by Point One.

NTRIP Server Example

Receive incoming Polaris corrections data and relay it as a simple NTRIP caster for use with devices that take NTRIP corrections. Receiver positions sent to the NTRIP server (via a NMEA $GPGGA message) will be forwarded to Polaris to associate the receiver with an appropriate corrections stream.

For example, to run an NTRIP server on TCP port 2101 (the standard NTRIP port), run the following command:

bazel run -c opt examples/ntrip:ntrip_server_example -- --polaris_api_key=<POLARIS_API_KEY> 0.0.0.0 2101 examples/ntrip

where <POLARIS_API_KEY> is the Polaris key assigned to you by Point One.

Any GNSS receiver that supports an NTRIP connection can then connect to the computer running this application to receive corrections, connecting to the NTRIP endpoint /Polaris. The receiver should be configured to send NMEA $GPGGA messages at a regular cadence (typically 1hz).

Note that the NTRIP server example application is not a full NTRIP server, and only supports a limited set of features. In particular, it does not support handling multiple connected receivers at a time.

Septentrio Receiver Example

Similar to the Generic Serial Receiver Example, this application relays RTK corrections to a Septentrio GNSS receiver over a serial connection, and forward positions from the receiver to Polaris. Positions are translated from Septentrio Binary Format (SBF) as needed.

This has been tested on Septentrio's AsteRx-m2 receiver. The example can be easily modified for receivers that may receive corrections over other interfaces.

Hardware Setup

Assure that the receiver is plugged into the computer via USB and that the receiver is connected to an antenna that supports L1/L2/L5 GPS frequencies.

Configure AsteRx-m2

For the example to work the receiver must be configured to stream binary out and to accept RTCMv3 corrections input. There is an example configuration in examples/data that can be applied using Septentrio's tools.

On Linux, the AsteRx-m2 presents itself as a wired ethernet interface. In most network configurations this should be 192.168.3.1. The receiver has an HTTP interface on port 80 that can be used to configure the receiver. Use a browser to visit http://192.168.3.1 to access the interface.

Download your current receiver configuration in the case that you would like to revert your receiver config (Current > Download Configuration). Upload the example configuration examples/data/AsteRx_m2_config.txt (Current > Upload Configuration). You can set this to Boot or a User profile by using the Copy Configuration Pane.

The import receiver commands in the above example are:

setDataInOut, USB1, , SBF
setSBFOutput, Stream1, , MeasEpoch+MeasExtra+EndOfMeas+GPSRawCA+GPSRawL2C+GPSRawL5+GLORawCA+GALRawFNAV+GALRawINAV+GEORawL1+GEORawL5+GPSNav+GPSAlm+GPSIon+GPSUtc+GLONav+GLOAlm+GLOTime+GALNav+GALAlm+GALIon+GALUtc+GALGstGps+GALSARRLM+GEOMT00+GEOPRNMask+GEOFastCorr+GEOIntegrity+GEOFastCorrDegr+GEONav+GEODegrFactors+GEONetworkTime+GEOAlm+GEOIGPMask+GEOLongTermCorr+GEOIonoDelay+GEOServiceLevel+GEOClockEphCovMatrix+BaseVectorGeod+PVTGeodetic+PosCovGeodetic+VelCovGeodetic+ReceiverTime+BDSRaw+QZSRawL1CA+QZSRawL2C+QZSRawL5+PosLocal+IRNSSRaw

Specifically, the code requires SBF output of message PVTGeodetic in order to read the position of the receiver.

Serial Permissions In Ubuntu

The AstrRx-m2 should create two serial interfaces when plugged into your computer via USB. If you have no other serial interfaces plugged in, these will likely be /dev/ttyACM0 and /dev/ttyACM1.

If you're running into issues, you may not have read/write access to the serial port on your machine. This is a common issue when using the serial port in Linux. To fix it, run:

sudo usermod -a -G dialout $USER

This will add the current user to the dialout group, giving you serial port access (to /dev/ttyACM0 for instance). Make sure to log out and login after running this command for it to take effect.

Running The Example

Build the code using the example above and run the binary.

Using Bazel from repo root directory:

bazel run //examples:septentrio_example -- --polaris_api_key=<POLARIS_API_KEY> --device=/dev/ttyACM0

Using CMake from repo root directory:

./build/septentrio_example --polaris_api_key=<POLARIS_API_KEY> --device=/dev/ttyACM0

Verifying Corrections

You can view the corrections status on the Septentrio HTTP interface http://192.168.3.1. If the corrections are being received, it should be noted in Corrections -> Corrections input tab. After receiving corrections for some time, the receiver should enter RTK float or RTK fixed modes.

Corrections -> Corrections input

You may also use Septentrio's RxTools application, which is distributed as part as the Septentrio receiver software utilities, to view the receiver status. This can be accomplished by connecting RxTools to the second serial port /dev/ttyACM1 and viewing the differential corrections.

RxTools > View > DiffCorr Info View

Name		Name	Last commit message	Last commit date
Latest commit History 285 Commits
.github/workflows		.github/workflows
bazel		bazel
c		c
cmake		cmake
compilers		compilers
docs		docs
examples		examples
src/point_one/polaris		src/point_one/polaris
test		test
third_party		third_party
.bazelrc		.bazelrc
.clang-format		.clang-format
.gitattributes		.gitattributes
.gitignore		.gitignore
BUILD		BUILD
CMakeLists.txt		CMakeLists.txt
LICENSE		LICENSE
WORKSPACE		WORKSPACE
readme.md		readme.md

License

PointOneNav/polaris

Folders and files

Latest commit

History

Repository files navigation

Point One Navigation Polaris Service

Table Of Contents

Polaris API Key and Unique ID

Polaris C Client

Requirements

Installation

CMake

Install Requirements

Including In Your CMake Project

Compiling From Source

Bazel

Including In Your Bazel Project

Compiling From Source

GNU Make

Using Polaris C Client

Example Applications

Simple Polaris Client

Connection Retry

Polaris C++ Client

Requirements

Installation

CMake

Install Requirements

Including In Your CMake Project

Compiling From Source

Bazel

Including In Your Bazel Project

Compiling From Source

Cross-Compiling With Bazel

Building On Mac OS

Using Polaris C++ Client

Example Applications

Simple Polaris Client

Generic Serial Receiver Example

Bazel

CMake

NTRIP Server Example

Septentrio Receiver Example

Hardware Setup

Configure AsteRx-m2

Serial Permissions In Ubuntu

Running The Example

Verifying Corrections

About

Resources

License

Stars

Watchers

Forks

Releases 14

Packages 0

Contributors 8

Languages

Packages