Fixes for dependency issues caused by 0.14 release

pyproject.toml

@@ -12,7 +12,7 @@ build-backend = "setuptools.build_meta"
 [tool.cibuildwheel]
 manylinux-x86_64-image = "manylinux2014"
 manylinux-i686-image = "manylinux2014"
-skip = "pp* cp36* cp37* cp38* *musllinux*"
+skip = "pp* cp36* cp37* *musllinux*"
 test-skip = "cp3*-win32 cp3*-manylinux_i686"
 test-command = "python {project}/tools/verify_wheels.py"
 # We need to use pre-built versions of Numpy and Scipy in the tests; they have a

qiskit_aer/backends/aer_compiler.py

@@ -609,7 +609,7 @@ def generate_aer_config(
     return config
 
 
-def assemble_circuit(circuit: QuantumCircuit):
+def assemble_circuit(circuit: QuantumCircuit, basis_gates=None):
     """assemble circuit object mapped to AER::Circuit"""
 
     num_qubits = circuit.num_qubits
@@ -691,6 +691,7 @@ def assemble_circuit(circuit: QuantumCircuit):
             is_conditional,
             conditional_reg,
             conditional_expr,
+            basis_gates,
         )
         index_map.append(num_of_aer_ops - 1)
 
@@ -796,6 +797,7 @@ def _assemble_op(
     is_conditional,
     conditional_reg,
     conditional_expr,
+    basis_gates,
 ):
     operation = inst.operation
     qubits = [qubit_indices[qubit] for qubit in inst.qubits]
@@ -816,7 +818,7 @@ def _assemble_op(
 
     num_of_aer_ops = 1
     # fmt: off
-    if name in {
+    if basis_gates is None and name in {
         "ccx", "ccz", "cp", "cswap", "csx", "cx", "cy", "cz", "delay", "ecr", "h",
         "id", "mcp", "mcphase", "mcr", "mcrx", "mcry", "mcrz", "mcswap", "mcsx",
         "mcu", "mcu1", "mcu2", "mcu3", "mcx", "mcx_gray", "mcy", "mcz", "p", "r",
@@ -916,6 +918,9 @@ def _assemble_op(
         aer_circ.mark(qubits, params)
     elif name == "qerror_loc":
         aer_circ.set_qerror_loc(qubits, label if label else name, conditional_reg, aer_cond_expr)
+    elif basis_gates is not None and name in basis_gates:
+        aer_circ.gate(name, qubits, params, [], conditional_reg, aer_cond_expr,
+                      label if label else name)
     elif name in ("for_loop", "while_loop", "if_else"):
         raise AerError(
             "control-flow instructions must be converted " f"to jump and mark instructions: {name}"
@@ -927,11 +932,12 @@ def _assemble_op(
     return num_of_aer_ops
 
 
-def assemble_circuits(circuits: List[QuantumCircuit]) -> List[AerCircuit]:
+def assemble_circuits(circuits: List[QuantumCircuit], basis_gates: list = None) -> List[AerCircuit]:
     """converts a list of Qiskit circuits into circuits mapped AER::Circuit
 
     Args:
         circuits: circuit(s) to be converted
+        basis_gates (list): supported gates to be converted
 
     Returns:
         a list of circuits to be run on the Aer backends and
@@ -951,5 +957,5 @@ def assemble_circuits(circuits: List[QuantumCircuit]) -> List[AerCircuit]:
             # Generate AerCircuit from the input circuit
             aer_qc_list, idx_maps = assemble_circuits(circuits=[qc])
     """
-    aer_circuits, idx_maps = zip(*[assemble_circuit(circuit) for circuit in circuits])
+    aer_circuits, idx_maps = zip(*[assemble_circuit(circuit, basis_gates) for circuit in circuits])
     return list(aer_circuits), list(idx_maps)

qiskit_aer/backends/aer_simulator.py

@@ -15,6 +15,7 @@
 
 import copy
 import logging
+from qiskit.providers import convert_to_target
 from qiskit.providers.options import Options
 from qiskit.providers.models import QasmBackendConfiguration
 from qiskit.providers.backend import BackendV2, BackendV1
@@ -33,6 +34,7 @@
 
 # pylint: disable=import-error, no-name-in-module, abstract-method
 from .controller_wrappers import aer_controller_execute
+from .name_mapping import NAME_MAPPING
 
 logger = logging.getLogger(__name__)
 
@@ -856,7 +858,7 @@ def from_backend(cls, backend, **options):
             name = configuration.backend_name
             configuration.backend_name = f"aer_simulator_from({name})"
 
-            target = None
+            target = convert_to_target(configuration, properties, None, NAME_MAPPING)
         else:
             raise TypeError(
                 "The backend argument requires a BackendV2 or BackendV1 object, "

qiskit_aer/backends/aerbackend.py

@@ -350,6 +350,11 @@ def target(self):
             tgt._coupling_graph = self._coupling_map.graph.copy()
         return tgt
 
+    def set_max_qubits(self, max_qubits):
+        """Set maximun number of qubits to be used for this backend."""
+        if self._target is not None:
+            self._configuration.n_qubits = max_qubits
+
     def clear_options(self):
         """Reset the simulator options to default values."""
         self._options = self._default_options()
@@ -445,7 +450,10 @@ def _execute_circuits_job(
         # Compile circuits
         circuits, noise_model = self._compile(circuits, **run_options)
 
-        aer_circuits, idx_maps = assemble_circuits(circuits)
+        if self._target is not None:
+            aer_circuits, idx_maps = assemble_circuits(circuits, self.configuration().basis_gates)
+        else:
+            aer_circuits, idx_maps = assemble_circuits(circuits)
         if parameter_binds:
             run_options["parameterizations"] = self._convert_binds(
                 circuits, parameter_binds, idx_maps

qiskit_aer/primitives/__init__.py

@@ -31,7 +31,11 @@
     Estimator
 """
 
+import qiskit
+
 from .estimator import Estimator
-from .estimator_v2 import EstimatorV2
 from .sampler import Sampler
-from .sampler_v2 import SamplerV2
+
+if not qiskit.__version__.startswith("0."):
+    from .estimator_v2 import EstimatorV2
+    from .sampler_v2 import SamplerV2

qiskit_aer/primitives/estimator.py

@@ -532,6 +532,7 @@ def _transpile_circuits(self, circuits):
                 circuit = self._circuits[i].copy()
                 circuit.measure_all()
                 num_qubits = circuit.num_qubits
+                self._backend.set_max_qubits(num_qubits)
                 circuit = self._transpile(circuit)
                 bit_map = {bit: index for index, bit in enumerate(circuit.qubits)}
                 layout = [bit_map[qr[0]] for _, qr, _ in circuit[-num_qubits:]]

qiskit_aer/primitives/sampler.py

@@ -182,6 +182,15 @@ def _preprocess_circuit(circuit: QuantumCircuit):
         circuit.save_probabilities_dict(qargs)
         return circuit
 
+    def _transpile_circuit(self, circuit):
+        self._backend.set_max_qubits(circuit.num_qubits)
+        transpiled = transpile(
+            circuit,
+            self._backend,
+            **self._transpile_options,
+        )
+        return transpiled
+
     def _transpile(self, circuit_indices: Sequence[int], is_shots_none: bool):
         to_handle = [
             i for i in set(circuit_indices) if (i, is_shots_none) not in self._transpiled_circuits
@@ -191,11 +200,7 @@ def _transpile(self, circuit_indices: Sequence[int], is_shots_none: bool):
             if is_shots_none:
                 circuits = (self._preprocess_circuit(circ) for circ in circuits)
             if not self._skip_transpilation:
-                circuits = transpile(
-                    list(circuits),
-                    self._backend,
-                    **self._transpile_options,
-                )
+                circuits = (self._transpile_circuit(circ) for circ in circuits)
             for i, circuit in zip(to_handle, circuits):
                 self._transpiled_circuits[(i, is_shots_none)] = circuit
 

releasenotes/notes/fixes_dependency_issues_by0.14-da7f11cb29710f86.yaml

@@ -0,0 +1,11 @@
+---
+fixes:
+  - |
+    Fixes for dependency issues caused by release 0.14.
+
+    Fix for issue in samplingVector.allocate() when > 63 qubits
+
+    Use basis_gates in AerCompiler when AerBackend is made by from_backend
+
+    Setting number of qubits before transpile for Primitives V1 (issue #2084)
+

src/simulators/matrix_product_state/matrix_product_state.hpp

@@ -797,7 +797,7 @@ State::sample_measure_using_apply_measure(const reg_t &qubits, uint_t shots,
     for (int_t i = 0; i < static_cast<int_t>(shots); i++) {
       temp.initialize(qreg_);
       auto single_result = temp.apply_measure_internal(qubits, rnds_list[i]);
-      all_samples[i] = single_result;
+      all_samples[i].from_vector(single_result);
     }
   }
   return all_samples;
@@ -811,7 +811,7 @@ std::vector<SampleVector> State::sample_measure_all(uint_t shots,
 #pragma omp parallel for if (getenv("PRL_PROB_MEAS"))
   for (int_t i = 0; i < static_cast<int_t>(shots); i++) {
     auto single_result = qreg_.sample_measure(shots, rng);
-    all_samples[i] = single_result;
+    all_samples[i].from_vector(single_result);
   }
   return all_samples;
 }

src/simulators/sample_vector.hpp

@@ -123,9 +123,7 @@ void SampleVector::allocate(uint_t n, uint_t base) {
   elem_mask_ = (1ull << (elem_shift_bits_ + 1)) - 1;
   vec_mask_ = (1ull << vec_shift_bits_) - 1;
 
-  uint_t size = n >> vec_shift_bits_;
-  if (size == 0)
-    size = 1;
+  uint_t size = (n + (REG_SIZE >> elem_shift_bits_) - 1) >> vec_shift_bits_;
   bits_.resize(size, 0ull);
   size_ = n;
 }

src/simulators/stabilizer/stabilizer_state.hpp

@@ -519,7 +519,7 @@ std::vector<SampleVector> State::sample_measure(const reg_t &qubits,
   auto qreg_cache = BaseState::qreg_;
   std::vector<SampleVector> samples(shots);
   for (int_t ishot = 0; ishot < shots; ishot++) {
-    samples[ishot] = apply_measure_and_update(qubits, rng);
+    samples[ishot].from_vector(apply_measure_and_update(qubits, rng));
     BaseState::qreg_ = qreg_cache; // restore pre-measurement data from cache
   }
   return samples;