sinowealth-kb-tool

A utility for reading and writing flash contents on Sinowealth 8051-based devices (keyboards and mice) since they all seem to have similar ISP bootloaders.

Disclaimer

This is an experimental tool, so use it at your own risk.

Usage

Reading

⚠️ A read operation will set an LJMP (0x02) opcode at address <firmware_size-5> if it's not already present there. When this opcode is set, the bootloader considers the main firmware enabled and jumps to it when the device is powered on. This opcode should already be set on most devices and therefore the read operation should not cause any issues.

⚠️ During reading the ISP bootloader will redirect values in 0x0001 - 0x0002 to <firmware_size-4> - <firmware_size-3>. Because of this, the produced payload will be different from how memory is actually laid out in the MCU flash.

# reads firmware excluding isp bootloader 
sinowealth-kb-tool read -p nuphy-air60 foobar.hex

# reads only isp bootloader section
sinowealth-kb-tool read -p nuphy-air60 -b bootloader.hex

# full dump including firmware and bootloader
sinowealth-kb-tool read -p nuphy-air60 --full full.hex

# custom device
sinowealth-kb-tool read \
    --vendor_id 0x05ac \
    --product_id 0x024f \
    --firmware_size 61440 \
    --bootloader_size 4096 \ # optional
    --page_size 2048 \ # optional
    --isp_iface_num 1 \ # optional
    --isp_usage_page 0xff00 \ # optional
    --isp_usage 0x0001 \ # optional
    --isp_index 0 \ # optional
    --reboot false \ # optional
    foobar.hex

Writing

⚠️ Same as the read operation, the ISP bootloader will write values meant for addresses 0x0001-0x0002 to <firmware_size-4> - <firmware_size-3>.

# overwrites firmware (does not touch the bootloader section)
sinowealth-kb-tool write -p nuphy-air60 foobar.hex

# custom device
sinowealth-kb-tool write \
    --vendor_id 0x05ac \
    --product_id 0x024f \
    --firmware_size 61440 \
    --bootloader_size 4096 \ # optional
    --page_size 2048 \ # optional
    --isp_iface_num 1 \ # optional
    --isp_usage_page 0xff00 \ # optional
    --isp_usage 0x0001 \ # optional
    --isp_index 0 \ # optional
    --reboot false \ # optional
    foobar.hex

Supported Hardware

Keyboards

Model	ISP MD5	MCU	MCU Label	Tested Read	Tested Write
Aula F87	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	BYK916	✅	✅
Deltaco Gaming WK95R	2d169670eae0d36eae8188562c1f66e8	SH68F90A	BYK916	✅	✅
Digital Alliance Meca Warrior X	2d169670eae0d36eae8188562c1f66e8	SH68F90	SH68F90S	✅	✅
E-Yooso Z11	3e0ebd0c440af5236d7ff8872343f85d	SH68F90?	BYK901	✅	✅
Genesis Thor 300 RGB	2d169670eae0d36eae8188562c1f66e8	SH68F90	SH68F90S	✅	✅
Genesis Thor 300	e57490acebcaabfcff84a0ff013955d9	SH68F881	SH68F881W	✅	✅
Kzzi K68Pro	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	❓	✅	✅
Hykker X Range 2017 (RE-K70-BYK800)	13df4ce2933f9654ffef80d6a3c27199	SH68F881	BYK801	✅	❓
Leobog Hi75	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	BYK916	✅	✅
Machenike K500-B61	2d169670eae0d36eae8188562c1f66e8	SH68F90?	BYK916	✅	✅
NuPhy Air60	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	BYK916	✅	✅
NuPhy Air75	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	BYK916	✅	✅
NuPhy Air96	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	BYK916	✅	✅
NuPhy Halo65	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	BYK916	✅	✅
Redragon K530 Draconic PRO	cfc8661da8c9d7e351b36c0a763426aa	SH68F90A	BYK916	✅	✅
Redragon K614 Anivia 60%	2d169670eae0d36eae8188562c1f66e8	SH68F90A	BYK916	✅	✅
Redragon K617 FIZZ 60%	2d169670eae0d36eae8188562c1f66e8	SH68F90A	BYK916	✅	✅
Redragon K641 SHACO PRO	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	BYK916	✅	✅
Redragon K658 PRO SE	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	BYK916	✅	✅
Royal Kludge RK100	cfc8661da8c9d7e351b36c0a763426aa	SH68F90?	BYK916	✅	✅
Royal Kludge RK61	3e0ebd0c440af5236d7ff8872343f85d	SH68F90?	BYK916	✅	✅
Royal Kludge RK68 BT Dual	cfc8661da8c9d7e351b36c0a763426aa	SH68F90?	BYK901	✅	✅
Royal Kludge RK68 ISO Return	❓	SH68F90?	BYK916	✅	❓
Royal Kludge RK71	cfc8661da8c9d7e351b36c0a763426aa	SH68F90?	❓	✅	✅
Royal Kludge RK84	cfc8661da8c9d7e351b36c0a763426aa	SH68F90?	BYK916	✅	✅
Royal Kludge RKG68	cfc8661da8c9d7e351b36c0a763426aa	SH68F90A	SH68F90AS	✅	✅
Terport TR95	2d169670eae0d36eae8188562c1f66e8	SH68F90A	BYK916	✅	✅
Weikav Sugar65	2d169670eae0d36eae8188562c1f66e8	SH68F90	SH68F90S	✅	✅
Xinmeng K916	cfc8661da8c9d7e351b36c0a763426aa	SH68F90	❓	✅	✅
Xinmeng M66	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	SH68F90AS	✅	✅
Xinmeng M71	2d169670eae0d36eae8188562c1f66e8	SH68F90A	SH68F90AS	✅	✅
Xinmeng XM-RF68	2d169670eae0d36eae8188562c1f66e8	SH68F90	SH68F90U	✅	✅
Yunzii AL66	3e0ebd0c440af5236d7ff8872343f85d	SH68F90A	SH68F90AS	✅	✅
Yunzii AL71	2d169670eae0d36eae8188562c1f66e8	SH68F90A	SH68F90AS	✅	✅

Mice

Model	ISP MD5	MCU	MCU Label	Tested Read	Tested Write
Glorious Model O	46459c31e58194fa076b8ce8fb1f3eaa	❓	BY8948	✅	❓
Trust GXT 960	620f0b67a91f7f74151bc5be745b7110	❓	BY8801	✅	❓

Bootloader Support

Platforms

ISP MD5	Windows	macOS	Linux
13df4ce2933f9654ffef80d6a3c27199	?	?	ok
2d169670eae0d36eae8188562c1f66e8	ok	?	ok
3e0ebd0c440af5236d7ff8872343f85d	ok	ok	ok
46459c31e58194fa076b8ce8fb1f3eaa	?	?	ok
620f0b67a91f7f74151bc5be745b7110	?	fail1	ok
cfc8661da8c9d7e351b36c0a763426aa	ok	fail1	ok
e57490acebcaabfcff84a0ff013955d9	ok	fail1	ok

Prerequisites

Linux

To enable running this tool without superuser privileges add the following udev rule with xxxx and yyyy replaced with your device Vendor ID and Product ID respectively.

# /etc/udev/rules.d/plugdev.rule
SUBSYSTEMS=="usb", ATTRS{idVendor}=="xxxx", ATTRS{idProduct}=="yyyy", MODE="0660", GROUP="plugdev"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0603", ATTRS{idProduct}=="1020", MODE="0660", GROUP="plugdev"

Make sure your user is part of the plugdev group.

macOS

If you encounter errors like:

hid_open_path: failed to open IOHIDDevice from mach entry...

Ensure that your terminal application has access to input monitoring.

Acknowledgments

Thanks to @gashtaan for analyzing and explaining the inner workings of the ISP bootloaders. Without his help, this tool wouldn't be here!

Footnotes

1. macOS does not recognize the composite device as an HID device ↩ ↩² ↩³