Merge pull request #14 from MarlinFirmware/bugfix-2.0.x

Bugfix 2.0.x
Serhiy-K · Oct 17, 2020 · 7a647e5 · 7a647e5
2 parents dacfcda + 263f29a
commit 7a647e5
Show file tree

Hide file tree

Showing 224 changed files with 960 additions and 889 deletions.
diff --git a/.github/workflows/test-builds.yml b/.github/workflows/test-builds.yml
@@ -81,6 +81,7 @@ jobs:
         - STM32F103RET6_creality
         - LERDGEX
         - mks_robin_nano35
+        - NUCLEO_F767ZI
 
         # Put lengthy tests last
 

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -35,7 +35,7 @@
  *
  * Advanced settings can be found in Configuration_adv.h
  */
-#define CONFIGURATION_H_VERSION 020007
+#define CONFIGURATION_H_VERSION 020008
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -2205,22 +2205,83 @@
 //=============================================================================
 
 /**
- * TFT Type - Select your Display type
- *
- * Available options are:
- *   MKS_TS35_V2_0,
- *   MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32, MKS_ROBIN_TFT35,
- *   MKS_ROBIN_TFT43, MKS_ROBIN_TFT_V1_1R
- *   TFT_TRONXY_X5SA, ANYCUBIC_TFT35, LONGER_LK_TFT28
- *   TFT_GENERIC
- *
- * For TFT_GENERIC, you need to configure these 3 options:
- *   Driver:     TFT_DRIVER
- *               Current Drivers are: AUTO, ST7735, ST7789, ST7796, R61505, ILI9328, ILI9341, ILI9488
- *   Resolution: TFT_WIDTH and TFT_HEIGHT
- *   Interface:  TFT_INTERFACE_FSMC or TFT_INTERFACE_SPI
+ * Specific TFT Model Presets. Enable one of the following options
+ * or enable TFT_GENERIC and set sub-options.
  */
+
+//
+// 480x320, 3.5", SPI Display From MKS
+// Normally used in MKS Robin Nano V2
+//
+//#define MKS_TS35_V2_0
+
+//
+// 320x240, 2.4", FSMC Display From MKS
+// Normally used in MKS Robin Nano V1.2
+//
+//#define MKS_ROBIN_TFT24
+
+//
+// 320x240, 2.8", FSMC Display From MKS
+// Normally used in MKS Robin Nano V1.2
+//
+//#define MKS_ROBIN_TFT28
+
+//
+// 320x240, 3.2", FSMC Display From MKS
+// Normally used in MKS Robin Nano V1.2
+//
+//#define MKS_ROBIN_TFT32
+
+//
+// 480x320, 3.5", FSMC Display From MKS
+// Normally used in MKS Robin Nano V1.2
+//
+//#define MKS_ROBIN_TFT35
+
+//
+// 480x272, 4.3", FSMC Display From MKS
+//
+//#define MKS_ROBIN_TFT43
+
+//
+// 320x240, 3.2", FSMC Display From MKS
+// Normally used in MKS Robin
+//
+//#define MKS_ROBIN_TFT_V1_1R
+
+//
+// 480x320, 3.5", FSMC Stock Display from TronxXY
+//
+//#define TFT_TRONXY_X5SA
+
+//
+// 480x320, 3.5", FSMC Stock Display from AnyCubic
+//
+//#define ANYCUBIC_TFT35
+
+//
+// 320x240, 2.8", FSMC Stock Display from Longer/Alfawise
+//
+//#define LONGER_LK_TFT28
+
+//
+// Generic TFT with detailed options
+//
 //#define TFT_GENERIC
+#if ENABLED(TFT_GENERIC)
+  // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ]
+  #define TFT_DRIVER AUTO
+
+  // Interface. Enable one of the following options:
+  //#define TFT_INTERFACE_FSMC
+  //#define TFT_INTERFACE_SPI
+
+  // TFT Resolution. Enable one of the following options:
+  //#define TFT_RES_320x240
+  //#define TFT_RES_480x272
+  //#define TFT_RES_480x320
+#endif
 
 /**
  * TFT UI - User Interface Selection. Enable one of the following options:

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -30,7 +30,7 @@
  *
  * Basic settings can be found in Configuration.h
  */
-#define CONFIGURATION_ADV_H_VERSION 020007
+#define CONFIGURATION_ADV_H_VERSION 020008
 
 //===========================================================================
 //============================= Thermal Settings ============================
@@ -1048,10 +1048,10 @@
 
 // @section lcd
 
-#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
+#if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI)
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
-  #if ENABLED(ULTIPANEL)
+  #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen
   #endif
@@ -2958,7 +2958,7 @@
      * This allows the laser to keep in perfect sync with the planner and removes
      * the powerup/down delay since lasers require negligible time.
      */
-    #define LASER_POWER_INLINE
+    //#define LASER_POWER_INLINE
 
     #if ENABLED(LASER_POWER_INLINE)
       /**

diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp
@@ -145,7 +145,7 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 }
 
 #if ENABLED(LIGHTWEIGHT_UI)
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
   #include "../../shared/HAL_ST7920.h"
 
   #define ST7920_CS_PIN LCD_PINS_RS

diff --git a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h
@@ -72,7 +72,7 @@ static_assert(!(NUM_SERVOS && ENABLED(FAST_PWM_FAN)), "BLTOUCH and Servos are in
 //#endif
 
 #if MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
-  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
+  #if IS_RRD_FG_SC && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
     #error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 requires TMC_USE_SW_SPI."
   #endif
 #endif

diff --git a/Marlin/src/HAL/SAMD51/HAL.h b/Marlin/src/HAL/SAMD51/HAL.h
@@ -35,7 +35,8 @@
 
   // MYSERIAL0 required before MarlinSerial includes!
 
-  #define _MSERIAL(X) Serial##X
+  #define __MSERIAL(X) Serial##X
+  #define _MSERIAL(X) __MSERIAL(X)
   #define MSERIAL(X) _MSERIAL(INCREMENT(X))
 
   #if SERIAL_PORT == -1

diff --git a/Marlin/src/HAL/STM32F1/HAL.cpp b/Marlin/src/HAL/STM32F1/HAL.cpp
@@ -130,7 +130,7 @@ const uint8_t adc_pins[] = {
   #if ENABLED(FILAMENT_WIDTH_SENSOR)
     FILWIDTH_PIN,
   #endif
-  #if ENABLED(ADC_KEYPAD)
+  #if HAS_ADC_BUTTONS
     ADC_KEYPAD_PIN,
   #endif
   #if HAS_JOY_ADC_X
@@ -187,7 +187,7 @@ enum TempPinIndex : char {
   #if ENABLED(FILAMENT_WIDTH_SENSOR)
     FILWIDTH,
   #endif
-  #if ENABLED(ADC_KEYPAD)
+  #if HAS_ADC_BUTTONS
     ADC_KEY,
   #endif
   #if HAS_JOY_ADC_X
@@ -389,7 +389,7 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) {
     #if ENABLED(FILAMENT_WIDTH_SENSOR)
       case FILWIDTH_PIN: pin_index = FILWIDTH; break;
     #endif
-    #if ENABLED(ADC_KEYPAD)
+    #if HAS_ADC_BUTTONS
       case ADC_KEYPAD_PIN: pin_index = ADC_KEY; break;
     #endif
     #if ENABLED(POWER_MONITOR_CURRENT)

diff --git a/Marlin/src/HAL/STM32F1/inc/SanityCheck.h b/Marlin/src/HAL/STM32F1/inc/SanityCheck.h
@@ -51,3 +51,10 @@
 #if ENABLED(NEOPIXEL_LED)
   #error "NEOPIXEL_LED (Adafruit NeoPixel) is not supported for HAL/STM32F1. Comment out this line to proceed at your own risk!"
 #endif
+
+// Emergency Parser needs at least one serial with HardwareSerial or USBComposite.
+// The USBSerial maple don't allow any hook to implement EMERGENCY_PARSER.
+// And copy all USBSerial code to marlin space to support EMERGENCY_PARSER, when we have another options, don't worth it.
+#if ENABLED(EMERGENCY_PARSER) && !defined(USE_USB_COMPOSITE) && ((SERIAL_PORT == -1 && !defined(SERIAL_PORT_2)) || (SERIAL_PORT_2 == -1 && !defined(SERIAL_PORT)))
+  #error "EMERGENCY_PARSER is only supported by HardwareSerial or USBComposite in HAL/STM32F1."
+#endif
diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp
@@ -59,7 +59,7 @@
 
 #include "sd/cardreader.h"
 
-#include "lcd/ultralcd.h"
+#include "lcd/marlinui.h"
 #if HAS_TOUCH_XPT2046
   #include "lcd/touch/touch_buttons.h"
 #endif

diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h
@@ -170,7 +170,7 @@
 #define _DO_12(W,C,A,V...) (_##W##_1(A) C _DO_11(W,C,V))
 #define __DO_N(W,C,N,V...) _DO_##N(W,C,V)
 #define _DO_N(W,C,N,V...)  __DO_N(W,C,N,V)
-#define DO(W,C,V...)       _DO_N(W,C,NUM_ARGS(V),V)
+#define DO(W,C,V...)       (_DO_N(W,C,NUM_ARGS(V),V))
 
 // Macros to support option testing
 #define _CAT(a,V...) a##V
@@ -186,6 +186,7 @@
 #define _DIS_1(O)           NOT(_ENA_1(O))
 #define ENABLED(V...)       DO(ENA,&&,V)
 #define DISABLED(V...)      DO(DIS,&&,V)
+#define COUNT_ENABLED(V...) DO(ENA,+,V)
 
 #define TERN(O,A,B)         _TERN(_ENA_1(O),B,A)    // OPTION converted to '0' or '1'
 #define TERN0(O,A)          _TERN(_ENA_1(O),0,A)    // OPTION converted to A or '0'
@@ -200,6 +201,7 @@
 #define ALL(V...)           ENABLED(V)
 #define BOTH(V1,V2)         ALL(V1,V2)
 #define EITHER(V1,V2)       ANY(V1,V2)
+#define MANY(V...)          (COUNT_ENABLED(V) > 1)
 
 // Macros to support pins/buttons exist testing
 #define PIN_EXISTS(PN)      (defined(PN##_PIN) && PN##_PIN >= 0)

diff --git a/Marlin/src/feature/bedlevel/bedlevel.cpp b/Marlin/src/feature/bedlevel/bedlevel.cpp
@@ -36,7 +36,7 @@
 #endif
 
 #if ENABLED(LCD_BED_LEVELING)
-  #include "../../lcd/ultralcd.h"
+  #include "../../lcd/marlinui.h"
 #endif
 
 #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)

diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.h b/Marlin/src/feature/bedlevel/ubl/ubl.h
@@ -59,7 +59,7 @@ class unified_bed_leveling {
       static int  g29_grid_size;
     #endif
 
-    #if ENABLED(NEWPANEL)
+    #if IS_NEWPANEL
       static void move_z_with_encoder(const float &multiplier);
       static float measure_point_with_encoder();
       static float measure_business_card_thickness(float in_height);

diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
@@ -30,7 +30,7 @@
   #include "../../../HAL/shared/eeprom_api.h"
   #include "../../../libs/hex_print.h"
   #include "../../../module/settings.h"
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
   #include "../../../module/stepper.h"
   #include "../../../module/planner.h"
   #include "../../../module/motion.h"

diff --git a/Marlin/src/feature/cancel_object.cpp b/Marlin/src/feature/cancel_object.cpp
@@ -25,7 +25,7 @@
 
 #include "cancel_object.h"
 #include "../gcode/gcode.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 
 CancelObject cancelable;
 

diff --git a/Marlin/src/feature/e_parser.cpp b/Marlin/src/feature/e_parser.cpp
@@ -32,6 +32,7 @@
 
 // Static data members
 bool EmergencyParser::killed_by_M112, // = false
+     EmergencyParser::quickstop_by_M410,
      EmergencyParser::enabled;
 
 #if ENABLED(HOST_PROMPT_SUPPORT)

diff --git a/Marlin/src/feature/e_parser.h b/Marlin/src/feature/e_parser.h
@@ -63,6 +63,7 @@ class EmergencyParser {
   };
 
   static bool killed_by_M112;
+  static bool quickstop_by_M410;
 
   #if ENABLED(HOST_PROMPT_SUPPORT)
     static uint8_t M876_reason;
@@ -168,7 +169,7 @@ class EmergencyParser {
           if (enabled) switch (state) {
             case EP_M108: wait_for_user = wait_for_heatup = false; break;
             case EP_M112: killed_by_M112 = true; break;
-            case EP_M410: quickstop_stepper(); break;
+            case EP_M410: quickstop_by_M410 = true; break;
             #if ENABLED(HOST_PROMPT_SUPPORT)
               case EP_M876SN: host_response_handler(M876_reason); break;
             #endif

diff --git a/Marlin/src/feature/hotend_idle.cpp b/Marlin/src/feature/hotend_idle.cpp
@@ -34,7 +34,7 @@
 
 #include "../module/temperature.h"
 #include "../module/motion.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 
 extern HotendIdleProtection hotend_idle;
 

diff --git a/Marlin/src/feature/mmu2/mmu2.cpp b/Marlin/src/feature/mmu2/mmu2.cpp
@@ -30,7 +30,7 @@
 MMU2 mmu2;
 
 #include "../../gcode/gcode.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 #include "../../libs/buzzer.h"
 #include "../../libs/nozzle.h"
 #include "../../module/temperature.h"

diff --git a/Marlin/src/feature/password/password.h b/Marlin/src/feature/password/password.h
@@ -21,7 +21,7 @@
  */
 #pragma once
 
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 class Password {
 public: