GitHub - T-NOVA/netfloc-demo: Heat templates and server application for SFC demo

#Service Funciton Chaining Demo using Netfloc, netfloc-heat and T-Nova VNFs

Scenario

User1 sends traffic to user2. The 2 users are connected with a switch (Pica8 bridge). On the same switch there is a NFVI-PoP (OpenStack Cloud). At the beginning the traffic is directly from user1 to user2. That traffic is random and the only specific thing is a UDP video stream at port 33334. Then the WICM, that is in the control of the Pica8 switch, redirects the traffic to the NFVI-PoP. In there netfloc has some chains already established. The traffic goes to vTC eth1. If it is the udp video stream (the distinction is port based, on port 33334) the vTC sends it to eth3 to be forwarded towards the vMT. vMT transcodes the video stream and adds a watermark. All other traffic is sent to eth2 and then towards the vTC-f. Both of these chains arrive then at user2. After this the WICM stops the redirection towards the PoP so the traffic goes again directly from user1 to user2.

This is setup prepared for the SFC PoP2 on the Demokritos testbed. Netfloc has to be up and running on the SDN node, and the server application on the Control node [[email protected]]: /home/localadmin/netfloc-demo with root access. For the demo the netloc-heat plugin is already configured.

Configure OpenStack HEAT for Netfloc

This is an OpenStack HEAT plugin for the SDK for SDN - Netfloc in order to use the resources of its service funciton chaining (SFC) library. It contains netfloc.py to be copied in the heat plugins library and a yaml template: demo_create.yaml to create all the required OpenStack resources for SFC (VNF VMs, networks, and ports) and two service chains.

Prepare the plugin

Create a heat plugin directory under /usr/lib and copy inside the file netfloc.py (or place it alternatively under existing user-defined library):

mkdir /usr/lib/heat
cp src/netfloc.py /usr/lib/heat/

Uncomment the plugin_dirs line in /etc/heat/heat.conf and include the path to the library. In Demokritos testbed:

plugin_dirs=/var/lib/heat/heat/contrib/nova_flavor/nova_flavor,/var/lib/heat/heat/contrib/netfloc/resources

Netfloc: /var/lib/heat/heat/contrib/netfloc/resources/netfloc.py

For the chain to work, the port ID has to be returned by the handle_create() method of the native heat implementation for the port.py resource. To do so include the following line at the end of this method:

return port['id']

This will enable to return the Port ID as a resource in the yaml template for chain creation. The heat port.py resource library is located under:

/usr/lib/python2.7/site-packages/heat/engine/resources/openstack/neutron/port.py

Restart the heat engine service:

service heat-engine restart

Run heat resource-type-list and verify that the following two Netfloc resources show up:

Netfloc::Service::Chain

Test the service chain

Before creating a chain, Netfloc must be running in a clean OpenStack environment and a public network has to be manualy created, assigning its ID as a parameter in the netfloc-demo/templates/demo_create.yaml file.
Once the setup is done and the chain is created using: heat stack-create -f demo_create.yaml [name_of_stack] the chain ID is listed in the Outputs section of the Stack Overview. You can verify that the traffic steering is correct (ex. using tcpdump) inside the VNF and on the endpoints.
To delete the chain run: heat stack-delete [name_of_stack]
This is the output from the heat-engine log file:

tail -f /var/log/heat/heat-engine.log | grep --line-buffered netfloc:

DEBUG urllib3.connectionpool [-] "POST /restconf/operations/netfloc:create-service-chain HTTP/1.1" 200 None _make_request /usr/lib/python2.7/dist-packages/urllib3/connectionpool.py:430

DEBUG urllib3.connectionpool [-] "POST /restconf/operations/netfloc:delete-service-chain HTTP/1.1" 200 0 _make_request /usr/lib/python2.7/dist-packages/urllib3/connectionpool.py:430

This is the output from the Netfloc log file:

tail -f karaf/target/assembly/data/log/karaf.log | grep --line-buffered chainID

2016-07-27 16:28:13,415 | INFO  | p784668118-46752 | ServiceChain                     | 269 - ch.icclab.netfloc.impl - 1.0.0.SNAPSHOT | ServiceChain chainID: 1
2016-07-27 16:28:13,416 | INFO  | p784668118-46752 | NetflocServiceImpl               | 269 - ch.icclab.netfloc.impl - 1.0.0.SNAPSHOT | chainID: 1
2016-07-27 16:28:44,048 | INFO  | p784668118-46752 | ServiceChain                     | 269 - ch.icclab.netfloc.impl - 1.0.0.SNAPSHOT | ServiceChain chainID: 2
2016-07-27 16:28:44,049 | INFO  | p784668118-46752 | NetflocServiceImpl               | 269 - ch.icclab.netfloc.impl - 1.0.0.SNAPSHOT | chainID: 2

A simple demo example of service chain setup is shown in the following ICCLab blog post. Following the basic template, the complexity of the chain can be modified by defining additional VNF resources in the yaml template.

Server app for port mapping and flows setup

For the app to work, a passwordless login is required for: Node2 and Switch from the Control node. Plus NOPASSWD is required for the ovs-ofctl and the VNF scrips in Node2 and the Switch. The VNFs also reqire passwordless access and root priviledges for the scripts, which for this demo is already preconfigured in the VNFs snapsohts. The way to do it:

Switch
sudo visudo -f /etc/sudoers.d/ovs-ofctl 
localadmin nfvipop2-switch = (root) NOPASSWD: /usr/local/bin/ovs-ofctl

sudo visudo -f /etc/sudoers.d/sfc-vlan-flows
localadmin nfvipop2-switch = (root) NOPASSWD: /home/localadmin/sfc-vlan-flows

Control
sudo visudo -f /etc/sudoers.d/ovs-ofctl 
localadmin node2 = (root) NOPASSWD: /usr/local/bin/ovs-ofctl

vSF
sudo visudo -f /etc/sudoers.d/ovs-ofctl 
ubuntu vsf = (root) NOPASSWD: /usr/bin/ovs-ofctl

vTC
sudo visudo -f /etc/sudoers.d/run-vTC
ubuntu ubuntu-amd64 = (root) NOPASSWD: /home/ubuntu/run-vTC.sh

sudo visudo -f /etc/sudoers.d/sudo
ubuntu ubuntu-amd64 = (root) NOPASSWD: ALL

vTC-f
sudo visudo -f /etc/sudoers.d/run-vTC-f
ubuntu ubuntu-amd64 = (root) NOPASSWD: /home/ubuntu/run-vTC-f.sh

sudo visudo -f /etc/sudoers.d/sudo
ubuntu ubuntu-amd64 = (root) NOPASSWD: ALL

vMT
sudo visudo -f /etc/sudoers.d/sudo
ubuntu ubuntu-amd64 = (root) NOPASSWD: ALL

Scripts in the OS nodes and the VMs

Already prepared in the nodes.

In Switch - sfc-vlan-flows. These flows are required for WICM redirection of bi-directional traffic between User1 and User2.

root@nfvipop2-switch:/home/localadmin# cat sfc-vlan-flows
ovs-ofctl add-flow br0 priority=14,in_port=3,dl_vlan=400,actions=output:1
ovs-ofctl add-flow br0 priority=14,in_port=2,dl_vlan=401,actions=output:3
ovs-ofctl add-flow br0 priority=14,in_port=3,dl_vlan=401,actions=output:1
ovs-ofctl add-flow br0 priority=14,in_port=2,dl_vlan=400,actions=output:3

In vSF - sfc-flows-sf. This VM serves as hub for the VLAN traffic, i.e. it adds the VLAN flows required by the WICM before the traffic leaves the SFC PoP.

ovs-ofctl del-flows vnf
ovs-ofctl add-flow vnf priority=1,in_port=1,actions=drop
ovs-ofctl add-flow vnf priority=1,in_port=2,actions=drop
ovs-ofctl add-flow vnf priority=2,in_port=1,dl_vlan=401,actions=mod_vlan_vid:400,output:2
ovs-ofctl add-flow vnf priority=2,in_port=1,dl_vlan=400,actions=mod_vlan_vid:401,output:2
ovs-ofctl dump-flows vnf
ifconfig eth1 up
ifconfig eth2 up

In vTC - run-vTC.sh. This script runs the vTC in DPI mode.

#!/bin/sh
if [ ! -f vtc/PF_RING/kernel/pf_ring.ko ]; then 
	insmod vtc/PF_RING/kernel/pf_ring.ko
fi
ifconfig eth1 promisc up
ifconfig eth2 promisc up
ifconfig eth3 promisc up
cd ndpi-send/nDPI/example
nohup ./ndpiReader -i eth1 -a eth2 -b eth3 -t -v 2 -V 2 &
echo "vTC started successfully ツ"
exit

Verify with ps aux | grep ndpi that the vTC is running.
In vTC-f run-vTC-f.sh. This script runs the vTC in forwarding mode.

if [ ! -f vtc/PF_RING/kernel/pf_ring.ko ]; then
	insmod vtc/PF_RING/kernel/pf_ring.ko
fi
ifconfig eth1 promisc up
ifconfig eth2 promisc up
cd vtc/PF_RING/userland/examples
nohup ./pfbridge -a eth1 -b eth2 &
echo "vTC-f started successfully ツ"
exit

Verify with ps aux | grep pfring that the vTC is running.
In vMT run-vMT.sh. This script runs the transcoding service specifying a watermark to be added on the incoming traffic.

ifconfig eth1 promisc up
ifconfig eth2 promisc up
ffmpeg -re -i udp:13.13.13.5:33334 -i watermark_sesame_logo.png -filter_complex "overlay=7*((main_w-overlay_w)/8):(main_h-overlay_h)/2" -vcodec mpeg4 -an -b:v 2048 -f mpegts udp:10.50.0.2:33334

After the heat stack creation finish, run the server.py app from on Control node. You will be asked to manually enter the IP addresses of the VNF VMs. Expected output:

Node2 SFC flows installed successfully :)
-----------------------------------------
 cookie=0x0, duration=0.002s, table=0, n_packets=0, n_bytes=0, idle_age=593, priority=14,in_port=1,dl_vlan=400 actions=output:522
 cookie=0x0, duration=216.778s, table=0, n_packets=0, n_bytes=0, idle_age=593, priority=14,in_port=1,dl_vlan=401 actions=output:522

Control SFC flows installed successfully :)
-------------------------------------------
 cookie=0x0, duration=0.002s, table=0, n_packets=0, n_bytes=0, idle_age=593, priority=14,in_port=774,dl_vlan=400 actions=output:1
 cookie=0x0, duration=0.005s, table=0, n_packets=0, n_bytes=0, idle_age=593, priority=14,in_port=774,dl_vlan=401 actions=output:1

Switch SFC flows installed successfully :)
------------------------------------------
 cookie=0x0, duration=216.765s, table=0, n_packets=0, n_bytes=0, idle_age=593, priority=14,in_port=3,dl_vlan=400 actions=output:2
 cookie=0x0, duration=216.761s, table=0, n_packets=0, n_bytes=0, idle_age=593, priority=14,in_port=2,dl_vlan=401 actions=output:1
 cookie=0x0, duration=216.758s, table=0, n_packets=0, n_bytes=0, idle_age=593, priority=14,in_port=3,dl_vlan=401 actions=output:2
 cookie=0x0, duration=216.754s, table=0, n_packets=0, n_bytes=0, idle_age=593, priority=14,in_port=2,dl_vlan=400 actions=output:1

Please enter user@IP of the Service Forwarder VNF: [email protected]
Service Forwarder SFC flows installed successfully :)
-----------------------------------------------------
NXST_FLOW reply (xid=0x4):
 cookie=0x0, duration=0.001s, table=0, n_packets=0, n_bytes=0, idle_age=0, priority=2,in_port=1,dl_vlan=400 actions=mod_vlan_vid:401,output:2
 cookie=0x0, duration=0.003s, table=0, n_packets=0, n_bytes=0, idle_age=0, priority=2,in_port=1,dl_vlan=401 actions=mod_vlan_vid:400,output:2
 cookie=0x0, duration=0.008s, table=0, n_packets=0, n_bytes=0, idle_age=0, priority=1,in_port=1 actions=drop
 cookie=0x0, duration=0.005s, table=0, n_packets=0, n_bytes=0, idle_age=0, priority=1,in_port=2 actions=drop

Please enter user@IP of the vTC VNF: [email protected]
[email protected]
vTC started successfully ツ

Please enter user@IP of the vTC-f VNF: [email protected]
vTC-f started successfully ツ

With this the demo is (almost) ready to run. At the moment the vMT flows are added manually (PRELIMINARY). This isdue to the nature of the vMT who is a L3 VNF and makes aditional modification (on the top of the chainining rules) on the packet's header.

Rules to make the vMT work

First send video packets from User1 [[email protected]], port IP: 10.50.0.1 to User2 [[email protected]], port IP: 10.50.0.2:33334

ffmpeg -re -i big_buck_bunny_720p_surround.avi -vcodec mpeg4 -an -b 1024k -s 640x480 -f mpegts udp:10.50.0.2:33334

The following flows are needed to override the netfloc chain rules with new rules (as vMT requires). Two flows has to be added manually on the br-int bridge of the OpenStack node where the vMT is running.

vMT Flow (1)

Send the video stream from User1, and run from inside the vMT: tcpdump –i eth1 –nvve
Get the source mac of the udp packets, remember it (for example 02:12:ff:ff:ff:ff) and modify it to 02:12:00:00:00:00
Find in the Controller the vMT_in_port number inside /port_mappings/control_port_mappings. The port we need is the one that corresponds tovMT_eth0_port and it is usually one number lower than the vMT_in_port, which corresponds to the eth1 interface of that VM.
Run ovs-ofctl dump-flows br-int | grep "priority=20,in_port=1" to find the following rule: priority=20,in_port=1,dl_dst=02:00:00:00:00:00/ff:ff:00:00:00:00 actions=output:<vMT_in_port>
According to this, create the following rule: ovs-ofctl add-flow br-int priority=21,in_port=1,dl_dst=02:00:00:00:00:00/ff:ff:00:00:00:00,actions=strip_vlan,mod_dl_dst:<vMT eth0 mac>,mod_nw_dst:<vMT eth0 IP>,mod_nw_tos:4,output:<vMT eth0 port>
The final rule looks like this: ovs-ofctl add-flow br-int priority=21,in_port=1,dl_dst=02:00:00:00:00:00/ff:ff:00:00:00:00,actions=strip_vlan,mod_dl_dst:fa:16:3e:21:41:e0,mod_nw_dst:13.13.13.4,mod_nw_tos:4,output:933

vMT Flow (2)

Search the mac address you remembered in the previous command (02:12:00:00:00:00) on the Control node (running the vMT VNF):

ovs-ofctl dump-flows br-int | grep 02:12:00:00:00:00. Normally only one flow should appear as output, for example:

priority=20,in_port=935,dl_src=02:12:00:00:00:00/ff:ff:00:00:00:00,dl_dst=02:00:00:00:00:0,actions=mod_dl_src:00:90:27:22:d2:68,mod_dl_dst:b8:ae:ed:77:73:bc,output:937

Port 937 corresponds to vSF_in_port.

You need to take the actions from that flow. Add 2 more actions and mach it accordingly to create the following flow rule:

ovs-ofctl add-flow br-int priority=21,in_port=<vMT eth0 port>,dl_type=0x0800,nw_proto=17,nw_src=<vMT eth0 IP>,nw_dst=10.50.0.2,dl_src=<vMT eth0 mac>,dl_dst=<GET PACKET DST MAC FROM TCPDUMP ETH0 IN vMT>,actions=mod_vlan_vid:401,mod_nw_src=10.50.0.1,mod_dl_src:00:90:27:22:d2:68,mod_dl_dst:b8:ae:ed:77:73:bc,output:937

The final rule looks like this:

ovs-ofctl add-flow br-int priority=21,in_port=769,dl_type=0x0800,nw_proto=17,nw_src=13.13.13.5,nw_dst=10.50.0.2,dl_src=fa:16:3e:58:9a:84,dl_dst=fa:16:3e:21:f8:8d,actions=mod_vlan_vid:401,mod_nw_src=10.50.0.1,mod_dl_src:00:90:27:22:d2:68,mod_dl_dst:b8:ae:ed:77:73:bc,output:937

After the flows are installed, run the following command in the vMT to start the transcoding:

ffmpeg -re -i udp:13.13.13.5:33334 -i watermark_xil.png -filter_complex "overlay=7*((main_w-overlay_w)/8):(main_h-overlay_h)/2" -vcodec mpeg4 -an -b:v 2048 -f mpegts udp:10.50.0.2:33334

This command takes the video from the vMT eth0 interface with source IP 13.13.13.5, adds a watermark and sends it to destination IP: 10.50.0.2:33334 that are received on User2's interface eth0.100. To change the watermark, replace the file watermark_xil.png.

ffmpeg -re -i udp:13.13.13.5:33334 -i watermark_tnova_logo.jpg -filter_complex "overlay=7*((main_w-overlay_w)/8):(main_h-overlay_h)/2" -vcodec mpeg4 -an -b:v 2048 -f mpegts udp:10.50.0.2:33334

To see video in User2 (10.50.0.2), connect with Teamviewer. Run the ffplayer and the video shloud appear with the watermark on it:

ffplay udp://10.50.0.2:33334

The UDP packets can be captured on User2 on the following interface:tcpdump -i eth0.100 udp.

Video with and w/o watermark

WICM component is used to make redirection of the flows to the SFC PoP. When redirection is enabled the video is shown with watermark.
WICM redirection: REST calls are needed here. They are currently done using cURL. To view the existing redirections run:

curl http://10.30.0.12:12891/vnf-connectivity

To enable the redirection search the last $ns_instance_id and replace it with new ($ns_instance_id must be unique for each redirection). Then run the following to allocate vnlan_ids for the redirection:

localadmin@control:~$ curl -X  POST -H "Content-Type: application/json" -H "Cache-Control: no-cache" -d '{"service":{"ns_instance_id":"1","client_mkt_id":"1","nap_mkt_id":"1","nfvi_mkt_id":"1"}}' http://10.30.0.12:12891/vnf-connectivity
{
  "allocated": {
    "ce_transport": {
      "type": "vlan",
      "vlan_id": 400
    },
    "ns_instance_id": "1",
    "pe_transport": {
      "type": "vlan",
      "vlan_id": 401
    }
  }

To activte the redirection run:

localadmin@control:~$ curl -X PUT http://10.30.0.12:12891/vnf-connectivity/1
{
  "activated": {
    "ns_instance_id": "1"
  }

To disable the redirection and with this, the chain & video transcoding, run:

curl -X DELETE http://10.30.0.12:12891/vnf-connectivity/$ns_instance_id

Name		Name	Last commit message	Last commit date
Latest commit History 24 Commits
img		img
netfloc-heat		netfloc-heat
port_mappings		port_mappings
presentation		presentation
screenshots		screenshots
.gitignore		.gitignore
README.md		README.md
server.js		server.js

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Scenario

Configure OpenStack HEAT for Netfloc

Prepare the plugin

Test the service chain

Server app for port mapping and flows setup

Scripts in the OS nodes and the VMs

Rules to make the vMT work

vMT Flow (1)

vMT Flow (2)

Video with and w/o watermark

About

Releases

Packages

Contributors 2

Languages

T-NOVA/netfloc-demo

Folders and files

Latest commit

History

Repository files navigation

Scenario

Configure OpenStack HEAT for Netfloc

Prepare the plugin

Test the service chain

Server app for port mapping and flows setup

Scripts in the OS nodes and the VMs

Rules to make the vMT work

vMT Flow (1)

vMT Flow (2)

Video with and w/o watermark

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Contributors 2

Languages

Packages