Skip to content

1. TBase_Quick_Start

Jump to bottom
JennyJennyChen edited this page Jul 9, 2021 · 1 revision

什么是TBase

TBase是一个提供写可靠性，多主节点数据同步的关系数据库集群平台。你可以将TBase配置一台或者多台主机上，TBase数据存储在多台物理主机上面。数据表的存储有两种方式， 分别是distributed或者replicated ，当向TBase发送查询 SQL时，TBase会自动向数据节点发出查询语句并获取最终结果。

TBase采用分布式集群架构（如下图）， 该架构分布式为无共享(share nothing)模式，节点之间相应独立，各自处理自己的数据，处理后的结果可能向上层汇总或在节点间流转，各处理单元之间通过网络协议进行通信，并行处理和扩展能力更好，这也意味着只需要简单的x86服务器就可以部署TBase数据库集群

TBase架构图

下面简单解读一下TBase的三大模块

  • Coordinator：协调节点（简称CN）

    业务访问入口，负责数据的分发和查询规划，多个节点位置对等，每个节点都提供相同的数据库视图；在功能上CN上只存储系统的全局元数据，并不存储实际的业务数据。

  • Datanode：数据节点（简称DN）

    每个节点还存储业务数据的分片在功能上，DN节点负责完成执行协调节点分发的执行请求。

  • GTM:全局事务管理器(Global Transaction Manager)

    负责管理集群事务信息，同时管理集群的全局对象，比如序列等。

接下来，让我们来看看如何从源码开始，完成到TBase集群环境的搭建。

TBase源码编译安装

  • 创建tbase用户

    注意：所有需要安装TBase集群的机器上都需要创建

     mkdir /data
 useradd -d /data/tbase tbase

  • 源码获取

    git clone https://github.com/Tencent/TBase

  • 源码编译

    cd ${SOURCECODE_PATH}
 rm -rf ${INSTALL_PATH}/tbase_bin_v2.0
 chmod +x configure*
 ./configure --prefix=${INSTALL_PATH}/tbase_bin_v2.0  --enable-user-switch --with-openssl  --with-ossp-uuid CFLAGS=-g
 make clean
 make -sj
 make install
 chmod +x contrib/pgxc_ctl/make_signature
 cd contrib
 make -sj
 make install

    本文的使用环境中，上述两个参数如下

    ${SOURCECODE_PATH}=/data/tbase/TBase-master

    ${INSTALL_PATH}=/data/tbase/install

  • 集群安装

    • 集群规划

    下面以两台服务器上搭建1GTM主，1GTM备，2CN主（CN主之间对等，因此无需备CN），2DN主，2DN备的集群，该集群为具备容灾能力的最小配置

     机器1：10.215.147.158
 机器2：10.240.138.159

    集群规划如下：

    节点名称 IP 数据目录
    GTM master 10.215.147.158 /data/tbase/data/gtm
    GTM slave 10.240.138.159 /data/tbase/data/gtm
    CN1 10.215.147.158 /data/tbase/data/coord
    CN2 10.240.138.159 /data/tbase/data/coord
    DN1 master 10.215.147.158 /data/tbase/data/dn001
    DN1 slave 10.240.138.159 /data/tbase/data/dn001
    DN2 master 10.240.138.159 /data/tbase/data/dn002
    DN2 slave 10.215.147.158 /data/tbase/data/dn002

    示意图 TBase部署示意图

    • 机器间的ssh互信配置

    参考Linux ssh互信配置

    • 环境变量配置

    集群所有机器都需要配置

     [tbase@TENCENT64 ~]$ vim ~/.bashrc
 export TBASE_HOME=/data/tbase/install/tbase_bin_v2.0
 export PATH=$TBASE_HOME/bin:$PATH
 export LD_LIBRARY_PATH=$TBASE_HOME/lib:${LD_LIBRARY_PATH}

    以上，已经配置好了所需要基础环境，可以进入到集群初始化阶段，为了方便用户，TBase提供了专用的配置和操作工具：pgxc_ctl来协助用户快速搭建并管理集群，首先需要将前文所述的节点的ip，端口，目录写入到配置文件 pgxc_ctl.conf 中。

    • 初始化pgxc_ctl.conf文件
     [tbase@TENCENT64 ~]$ mkdir /data/tbase/pgxc_ctl
 [tbase@TENCENT64 ~]$ cd /data/tbase/pgxc_ctl
 [tbase@TENCENT64 ~/pgxc_ctl]$ vim pgxc_ctl.conf

    如下，是结合上文描述的IP，端口，数据库目录，二进制目录等规划来写的pgxc_ctl.conf文件。具体实践中只需按照自己的实际情况配置好即可.

     #!/bin/bash

 pgxcInstallDir=/data/tbase/install/tbase_bin_v2.0
 pgxcOwner=tbase
 defaultDatabase=postgres
 pgxcUser=$pgxcOwner
 tmpDir=/tmp
 localTmpDir=$tmpDir
 configBackup=n
 configBackupHost=pgxc-linker
 configBackupDir=$HOME/pgxc
 configBackupFile=pgxc_ctl.bak
 
 
 #---- GTM ----------
 gtmName=gtm
 gtmMasterServer=10.215.147.158
 gtmMasterPort=50001
 gtmMasterDir=/data/tbase/data/gtm
 gtmExtraConfig=none
 gtmMasterSpecificExtraConfig=none
 gtmSlave=y
 gtmSlaveServer=10.240.138.159
 gtmSlavePort=50001
 gtmSlaveDir=/data/tbase/data/gtm
 gtmSlaveSpecificExtraConfig=none
 
 #---- Coordinators -------
 coordMasterDir=/data/tbase/data/coord
 coordArchLogDir=/data/tbase/data/coord_archlog
 
 coordNames=(cn001 cn002 )
 coordPorts=(30004 30004 )
 poolerPorts=(31110 31110 )
 coordPgHbaEntries=(0.0.0.0/0)
 coordMasterServers=(10.215.147.158 10.240.138.159)
 coordMasterDirs=($coordMasterDir $coordMasterDir)
 coordMaxWALsernder=2
 coordMaxWALSenders=($coordMaxWALsernder $coordMaxWALsernder )
 coordSlave=n
 coordSlaveSync=n
 coordArchLogDirs=($coordArchLogDir $coordArchLogDir)
 
 coordExtraConfig=coordExtraConfig
 cat > $coordExtraConfig <<EOF
 #================================================
 # Added to all the coordinator postgresql.conf
 # Original: $coordExtraConfig
 
 include_if_exists = '/data/tbase/global/global_tbase.conf'
 
 wal_level = replica
 wal_keep_segments = 256 
 max_wal_senders = 4
 archive_mode = on 
 archive_timeout = 1800 
 archive_command = 'echo 0' 
 log_truncate_on_rotation = on 
 log_filename = 'postgresql-%M.log' 
 log_rotation_age = 4h 
 log_rotation_size = 100MB
 hot_standby = on 
 wal_sender_timeout = 30min 
 wal_receiver_timeout = 30min 
 shared_buffers = 1024MB 
 max_pool_size = 2000
 log_statement = 'ddl'
 log_destination = 'csvlog'
 logging_collector = on
 log_directory = 'pg_log'
 listen_addresses = '*'
 max_connections = 2000
 
 EOF
 
 coordSpecificExtraConfig=(none none)
 coordExtraPgHba=coordExtraPgHba
 cat > $coordExtraPgHba <<EOF
 
 local   all             all                                     trust
 host    all             all             0.0.0.0/0               trust
 host    replication     all             0.0.0.0/0               trust
 host    all             all             ::1/128                 trust
 host    replication     all             ::1/128                 trust
 
 
 EOF
 
 
 coordSpecificExtraPgHba=(none none)
 coordAdditionalSlaves=n	
 cad1_Sync=n
 
 #---- Datanodes ---------------------
 dn1MstrDir=/data/tbase/data/dn001
 dn2MstrDir=/data/tbase/data/dn002
 dn1SlvDir=/data/tbase/data/dn001
 dn2SlvDir=/data/tbase/data/dn002
 dn1ALDir=/data/tbase/data/datanode_archlog
 dn2ALDir=/data/tbase/data/datanode_archlog
 
 primaryDatanode=dn001
 datanodeNames=(dn001 dn002)
 datanodePorts=(40004 40004)
 datanodePoolerPorts=(41110 41110)
 datanodePgHbaEntries=(0.0.0.0/0)
 datanodeMasterServers=(10.215.147.158 10.240.138.159)
 datanodeMasterDirs=($dn1MstrDir $dn2MstrDir)
 dnWALSndr=4
 datanodeMaxWALSenders=($dnWALSndr $dnWALSndr)
 
 datanodeSlave=y
 datanodeSlaveServers=(10.240.138.159 10.215.147.158)
 datanodeSlavePorts=(50004 54004)
 datanodeSlavePoolerPorts=(51110 51110)
 datanodeSlaveSync=n
 datanodeSlaveDirs=($dn1SlvDir $dn2SlvDir)
 datanodeArchLogDirs=($dn1ALDir/dn001 $dn2ALDir/dn002)
 
 datanodeExtraConfig=datanodeExtraConfig
 cat > $datanodeExtraConfig <<EOF
 #================================================
 # Added to all the coordinator postgresql.conf
 # Original: $datanodeExtraConfig
 
 include_if_exists = '/data/tbase/global/global_tbase.conf'
 listen_addresses = '*' 
 wal_level = replica 
 wal_keep_segments = 256 
 max_wal_senders = 4
 archive_mode = on 
 archive_timeout = 1800 
 archive_command = 'echo 0' 
 log_directory = 'pg_log' 
 logging_collector = on 
 log_truncate_on_rotation = on 
 log_filename = 'postgresql-%M.log' 
 log_rotation_age = 4h 
 log_rotation_size = 100MB
 hot_standby = on 
 wal_sender_timeout = 30min 
 wal_receiver_timeout = 30min 
 shared_buffers = 1024MB 
 max_connections = 4000 
 max_pool_size = 4000
 log_statement = 'ddl'
 log_destination = 'csvlog'
 wal_buffers = 1GB
 
 EOF
 
 datanodeSpecificExtraConfig=(none none)
 datanodeExtraPgHba=datanodeExtraPgHba
 cat > $datanodeExtraPgHba <<EOF
 
 local   all             all                                     trust
 host    all             all             0.0.0.0/0               trust
 host    replication     all             0.0.0.0/0               trust
 host    all             all             ::1/128                 trust
 host    replication     all             ::1/128                 trust
 
 
 EOF
 
 
 datanodeSpecificExtraPgHba=(none none)
 
 datanodeAdditionalSlaves=n
 walArchive=n
    • 分发二进制包

    在一个节点配置好配置文件后，需要预先将二进制包部署到所有节点所在的机器上，这个可以使用pgxc_ctl工具，执行deploy all命令来完成。

     [tbase@TENCENT64 ~/pgxc_ctl]$ pgxc_ctl 
 /usr/bin/bash
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Reading configuration using /data/tbase/pgxc_ctl/pgxc_ctl_bash --home /data/tbase/pgxc_ctl --configuration /data/tbase/pgxc_ctl/pgxc_ctl.conf
 Finished reading configuration.
    ******** PGXC_CTL START ***************
 
 Current directory: /data/tbase/pgxc_ctl
 PGXC deploy all
 Deploying Postgres-XL components to all the target servers.
 Prepare tarball to deploy ... 
 Deploying to the server 10.215.147.158.
 Deploying to the server 10.240.138.159.
 Deployment done.
 
 登录到所有节点，check二进制包是否分发OK
 [tbase@TENCENT64 ~/install]$ ls /data/tbase/install/tbase_bin_v2.0
 bin  include  lib  share
    • 执行init all命令，完成集群初始化命令
     [tbase@TENCENT64 ~]$ pgxc_ctl
 /usr/bin/bash
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Reading configuration using /data/tbase/pgxc_ctl/pgxc_ctl_bash --home /data/tbase/pgxc_ctl --configuration /data/tbase/pgxc_ctl/pgxc_ctl.conf
 Finished reading configuration.
    ******** PGXC_CTL START ***************
 
 Current directory: /data/tbase/pgxc_ctl
 PGXC init all
 Initialize GTM master
 ....
 ....
 Initialize datanode slave dn001
 Initialize datanode slave dn002
 mkdir: cannot create directory '/data1/tbase': Permission denied
 chmod: cannot access '/data1/tbase/data/dn001': No such file or directory
 pg_ctl: directory "/data1/tbase/data/dn001" does not exist
 pg_basebackup: could not create directory "/data1/tbase": Permission denied
    • 安装错误处理

    一般init集群出错，终端会打印出错误日志，通过查看错误原因，更改配置即可，或者可以通过/data/tbase/pgxc_ctl/pgxc_log路径下的错误日志查看错误，排查配置文件的错误

     [tbase@TENCENT64 ~]$ ll ~/pgxc_ctl/pgxc_log/
 total 184
 -rw-rw-r-- 1 tbase tbase 81123 Nov 13 17:22 14105_pgxc_ctl.log
 -rw-rw-r-- 1 tbase tbase  2861 Nov 13 17:58 15762_pgxc_ctl.log
 -rw-rw-r-- 1 tbase tbase 14823 Nov 14 07:59 16671_pgxc_ctl.log
 -rw-rw-r-- 1 tbase tbase  2721 Nov 13 16:52 18891_pgxc_ctl.log
 -rw-rw-r-- 1 tbase tbase  1409 Nov 13 16:20 22603_pgxc_ctl.log
 -rw-rw-r-- 1 tbase tbase 60043 Nov 13 16:33 28932_pgxc_ctl.log
 -rw-rw-r-- 1 tbase tbase 15671 Nov 14 07:57 6849_pgxc_ctl.log

    通过运行 pgxc_ctl 工具，执行clean all命令删除已经初始化的文件，修改pgxc_ctl.conf文件，重新执行init all命令重新发起初始化。

     [tbase@TENCENT64 ~]$ pgxc_ctl
 /usr/bin/bash
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Reading configuration using /data/tbase/pgxc_ctl/pgxc_ctl_bash --home /data/tbase/pgxc_ctl --configuration /data/tbase/pgxc_ctl/pgxc_ctl.conf
 Finished reading configuration.
    ******** PGXC_CTL START ***************
 
 Current directory: /data/tbase/pgxc_ctl
 PGXC clean all
 
 
 [tbase@TENCENT64 ~]$ pgxc_ctl
 /usr/bin/bash
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Reading configuration using /data/tbase/pgxc_ctl/pgxc_ctl_bash --home /data/tbase/pgxc_ctl --configuration /data/tbase/pgxc_ctl/pgxc_ctl.conf
 Finished reading configuration.
    ******** PGXC_CTL START ***************
 
 Current directory: /data/tbase/pgxc_ctl
 PGXC init all
 Initialize GTM master
 EXECUTE DIRECT ON (dn002) 'ALTER NODE dn002 WITH (TYPE=''datanode'', 	HOST=''10.240.138.159'', PORT=40004, PREFERRED)';
 EXECUTE DIRECT
 EXECUTE DIRECT ON (dn002) 'SELECT pgxc_pool_reload()';
  pgxc_pool_reload 
 ------------------
  t
 (1 row)

 Done.

  • 查看集群状态 当发现上面的输出时，集群已经OK，另外也可以通过pgxc_ctl工具的monitor all命令来查看集群状态

     [tbase@TENCENT64 ~/pgxc_ctl]$ pgxc_ctl
 /usr/bin/bash
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Reading configuration using /data/tbase/pgxc_ctl/pgxc_ctl_bash --home /data/tbase/pgxc_ctl --configuration /data/tbase/pgxc_ctl/pgxc_ctl.conf
 Finished reading configuration.
    ******** PGXC_CTL START ***************
 
 Current directory: /data/tbase/pgxc_ctl
 PGXC monitor all
 Running: gtm master
 Not running: gtm slave
 Running: coordinator master cn001
 Running: coordinator master cn002
 Running: datanode master dn001
 Running: datanode slave dn001
 Running: datanode master dn002
 Not running: datanode slave dn002

    一般的如果配置的不是强同步模式，gtm salve，dn slave的故障不会影响访问。

  • 集群访问 访问TBase集群和访问单机的PostgreSQL基本上无差别，我们可以通过任意一个CN访问数据库集群：例如通过连接CN节点select pgxc_node表即可查看集群的拓扑结构（当前的配置下备机不会展示在pgxc_node中），在Linux命令行下通过psql访问的具体示例如下

     [tbase@TENCENT64 ~/pgxc_ctl]$ psql -h 10.215.147.158 -p 30004 -d postgres -U tbase
 psql (PostgreSQL 10.0 TBase V2)
 Type "help" for help.

 postgres=# \d
 Did not find any relations.
 postgres=# select * from pgxc_node;
  node_name | node_type | node_port |   node_host    | nodeis_primary | nodeis_preferred |  node_id   | node_cluster_name 
 -----------+-----------+-----------+----------------+----------------+------------------+------------+-------------------
  gtm       | G         |     50001 | 10.215.147.158 | t              | f                |  428125959 | tbase_cluster
  cn001     | C         |     30004 | 10.215.147.158 | f              | f                | -264077367 | tbase_cluster
  cn002     | C         |     30004 | 10.240.138.159 | f              | f                | -674870440 | tbase_cluster
  dn001     | D         |     40004 | 10.215.147.158 | t              | t                | 2142761564 | tbase_cluster
  dn002     | D         |     40004 | 10.240.138.159 | f              | f                |  -17499968 | tbase_cluster
 (5 rows)
    • 使用数据库前需要创建default group以及sharding表

    TBase使用datanode group来增加节点的管理灵活度，要求有一个default group才能使用，因此需要预先创建；一般情况下，会将节点的所有datanode节点加入到default group里 另外一方面，TBase的数据分布为了增加灵活度，加了中间逻辑层来维护数据记录到物理节点的映射，我们叫sharding，所以需要预先创建sharding，命令如下：

     postgres=# create default node group default_group  with (dn001,dn002);
 CREATE NODE GROUP
 postgres=# create sharding group to group default_group;
 CREATE SHARDING GROUP
    • 创建数据库，用户，创建表，增删查改等操作

    至此，就可以跟使用单机数据库一样来访问数据库集群了

     postgres=# create database test;
 CREATE DATABASE
 postgres=# create user test with password 'test';
 CREATE ROLE
 postgres=# alter database test owner to test;
 ALTER DATABASE
 postgres=# \c test test
 You are now connected to database "test" as user "test".
 test=> create table foo(id bigint, str text) distribute by shard(id);
 CREATE TABLE
 test=> insert into foo values(1, 'tencent'), (2, 'shenzhen');
 COPY 2
 test=> select * from foo;
  id |   str    
 ----+----------
   1 | tencent
   2 | shenzhen
 (2 rows)

  • 停止集群 通过pgxc_ctl工具的stop all命令来停止集群，stop all 后面可以加上参数 -m fast或者是**-m immediate**来决定如何停止各个节点。

     PGXC stop all -m fast
 Stopping all the coordinator masters.
 Stopping coordinator master cn001.
 Stopping coordinator master cn002.
 Done.
 Stopping all the datanode slaves.
 Stopping datanode slave dn001.
 Stopping datanode slave dn002.
 pg_ctl: PID file "/data/tbase/data/dn002/postmaster.pid" does not exist
 Is server running?
 Stopping all the datanode masters.
 Stopping datanode master dn001.
 Stopping datanode master dn002.
 Done.
 Stop GTM slave
 waiting for server to shut down..... done
 server stopped
 Stop GTM master
 waiting for server to shut down.... done
 server stopped
 PGXC monitor all
 Not running: gtm master
 Not running: gtm slave
 Not running: coordinator master cn001
 Not running: coordinator master cn002
 Not running: datanode master dn001
 Not running: datanode slave dn001
 Not running: datanode master dn002
 Not running: datanode slave dn002

  • 启动集群 通过pgxc_ctl工具的start all命令来启动集群

     [tbase@TENCENT64 ~]$ pgxc_ctl
 /usr/bin/bash
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Installing pgxc_ctl_bash script as /data/tbase/pgxc_ctl/pgxc_ctl_bash.
 Reading configuration using /data/tbase/pgxc_ctl/pgxc_ctl_bash --home /data/tbase/pgxc_ctl --configuration /data/tbase/pgxc_ctl/pgxc_ctl.conf
 Finished reading configuration.
    ******** PGXC_CTL START ***************
 
 Current directory: /data/tbase/pgxc_ctl
 PGXC start all

  • 结语 本文档只是给用户一个简单的指引，演示如何从源码开始，一步一步搭建一个完整的TBase集群，后续会有更多的文章来介绍TBase的特性使用，优化，问题定位等内容。

Clone this wiki locally