Update to OpenSSL 1.0.1g to patch for heartbleed #184

jacques · 2014-04-08T18:08:56Z

No description provided.

rmustacc · 2014-04-08T18:10:52Z

This has already been done in 8e8a100.

----- 3.4.4 ----- * Issue #184: Correct failure where find_package over-matched packages when directory traversal isn't short-circuited. ----- 3.4.3 ----- * Issue #183: Really fix test command with Python 3.1. ----- 3.4.2 ----- * Issue #183: Fix additional regression in test command on Python 3.1. ----- 3.4.1 ----- * Issue #180: Fix regression in test command not caught by py.test-run tests. --- 3.4 --- * Issue #176: Add parameter to the test command to support a custom test runner: --test-runner or -r. * Issue #177: Now assume most common invocation to install command on platforms/environments without stack support (issuing a warning). Setuptools now installs naturally on IronPython. Behavior on CPython should be unchanged.

Add test Upstream changes: 1.5.6 (2014-04-14) Bug fixes: Check the last line even if it has no end-of-line. (Issue #273) 1.5.5 (2014-04-10) Bug fixes: Fix regression with E22 checks and inline comments. (Issue #271) 1.5.4 (2014-04-07) Bug fixes: Fix negative offset with E303 before a multi-line docstring. (Issue #269) 1.5.3 (2014-04-04) Bug fixes: Fix wrong offset computation when error is on the last char of a physical line. (Issue #268) 1.5.2 (2014-04-04) Changes: Distribute a universal wheel file. Bug fixes: Report correct line number for E303 with comments. (Issue #60) Do not allow newline after parameter equal. (Issue #252) Fix line number reported for multi-line strings. (Issue #220) Fix false positive E121/E126 with multi-line strings. (Issue #265) Fix E501 not detected in comments with Python 2.5. Fix caret position with --show-source when line contains tabs. 1.5.1 (2014-03-27) Bug fixes: Fix a crash with E125 on multi-line strings. (Issue #263) 1.5 (2014-03-26) Changes: Report E129 instead of E125 for visually indented line with same indent as next logical line. (Issue #126) Report E265 for space before block comment. (Issue #190) Report E713 and E714 when operators not in and is not are recommended. (Issue #236) Allow long lines in multiline strings and comments if they cannot be wrapped. (Issue #224). Optionally disable physical line checks inside multiline strings, using # noqa. (Issue #242) Change text for E121 to report "continuation line under-indented for hanging indent" instead of indentation not being a multiple of 4. Report E131 instead of E121 / E126 if the hanging indent is not consistent within the same continuation block. It helps when error E121 or E126 is in the ignore list. Report E126 instead of E121 when the continuation line is hanging with extra indentation, even if indentation is not a multiple of 4. Bug fixes: Allow the checkers to report errors on empty files. (Issue #240) Fix ignoring too many checks when --select is used with codes declared in a flake8 extension. (Issue #216) Fix regression with multiple brackets. (Issue #214) Fix StyleGuide to parse the local configuration if the keyword argument paths is specified. (Issue #246) Fix a false positive E124 for hanging indent. (Issue #254) Fix a false positive E126 with embedded colon. (Issue #144) Fix a false positive E126 when indenting with tabs. (Issue #204) Fix behaviour when exclude is in the configuration file and the current directory is not the project directory. (Issue #247) The logical checks can return None instead of an empty iterator. (Issue #250) Do not report multiple E101 if only the first indentation starts with a tab. (Issue #237) Fix a rare false positive W602. (Issue #34) 1.4.6 (2013-07-02) Changes: Honor # noqa for errors E711 and E712. (Issue #180) When both a tox.ini and a setup.cfg are present in the project directory, merge their contents. The tox.ini file takes precedence (same as before). (Issue #182) Give priority to --select over --ignore. (Issue #188) Compare full path when excluding a file. (Issue #186) New option --hang-closing to switch to the alternative style of closing bracket indentation for hanging indent. Add error E133 for closing bracket which is missing indentation. (Issue #103) Accept both styles of closing bracket indentation for hanging indent. Do not report error E123 in the default configuration. (Issue #103) Bug fixes: Do not crash when running AST checks and the document contains null bytes. (Issue #184) Correctly report other E12 errors when E123 is ignored. (Issue #103) Fix false positive E261/E262 when the file contains a BOM. (Issue #193) Fix E701, E702 and E703 not detected sometimes. (Issue #196) Fix E122 not detected in some cases. (Issue #201 and #208) Fix false positive E121 with multiple brackets. (Issue #203) 1.4.5 (2013-03-06) When no path is specified, do not try to read from stdin. The feature was added in 1.4.3, but it is not supported on Windows. Use - filename argument to read from stdin. This usage is supported since 1.3.4. (Issue #170) Do not require setuptools in setup.py. It works around an issue with pip and Python 3. (Issue #172) Add __pycache__ to the ignore list. Change misleading message for E251. (Issue #171) Do not report false E302 when the source file has a coding cookie or a comment on the first line. (Issue #174) Reorganize the tests and add tests for the API and for the command line usage and options. (Issues #161 and #162) Ignore all checks which are not explicitly selected when select is passed to the StyleGuide constructor. 1.4.4 (2013-02-24) Report E227 or E228 instead of E225 for whitespace around bitwise, shift or modulo operators. (Issue #166) Change the message for E226 to make clear that it is about arithmetic operators. Fix a false positive E128 for continuation line indentation with tabs. Fix regression with the --diff option. (Issue #169) Fix the TestReport class to print the unexpected warnings and errors. 1.4.3 (2013-02-22) Hide the --doctest and --testsuite options when installed. Fix crash with AST checkers when the syntax is invalid. (Issue #160) Read from standard input if no path is specified. Initiate a graceful shutdown on Control+C. Allow to change the checker_class for the StyleGuide. 1.4.2 (2013-02-10) Support AST checkers provided by third-party applications. Register new checkers with register_check(func_or_cls, codes). Allow to construct a StyleGuide with a custom parser. Accept visual indentation without parenthesis after the if statement. (Issue #151) Fix UnboundLocalError when using # noqa with continued lines. (Issue #158) Re-order the lines for the StandardReport. Expand tabs when checking E12 continuation lines. (Issue #155) Refactor the testing class TestReport and the specific test functions into a separate test module. 1.4.1 (2013-01-18) Allow sphinx.ext.autodoc syntax for comments. (Issue #110) Report E703 instead of E702 for the trailing semicolon. (Issue #117) Honor # noqa in addition to # nopep8. (Issue #149) Expose the OptionParser factory for better extensibility. 1.4 (2012-12-22) Report E226 instead of E225 for optional whitespace around common operators (*, **, /, + and -). This new error code is ignored in the default configuration because PEP 8 recommends to "use your own judgement". (Issue #96) Lines with a # nopep8 at the end will not issue errors on line length E501 or continuation line indentation E12*. (Issue #27) Fix AssertionError when the source file contains an invalid line ending "\r\r\n". (Issue #119) Read the [pep8] section of tox.ini or setup.cfg if present. (Issue #93 and #141) Add the Sphinx-based documentation, and publish it on http://pep8.readthedocs.org/. (Issue #105)

Development 1.0.9 1.0.9b Work around pkg-config issue for xulrunner 25, 2.23 and seamonkey 2.23 and higher (missing compiler flag) Work around pkg-config issue for xulrunner 26 (missing compiler flag) 1.0.9a Updated German translation Add in code from Issue #184 to see if this helps the Debian folks with running the plugin on older versions

Version 2.0 ----------- (released Nov 9, 2014) - Default lexer encoding is now "guess", i.e. UTF-8 / Locale / Latin1 is tried in that order. - Major update to Swift lexer (pull request #410). - Multiple fixes to lexer guessing in conflicting cases: * recognize HTML5 by doctype * recognize XML by XML declaration * don't recognize C/C++ as SystemVerilog - Simplified regexes and builtin lists. Version 2.0rc1 -------------- (released Oct 16, 2014) - Dropped Python 2.4 and 2.5 compatibility. This is in favor of single-source compatibility between Python 2.6, 2.7 and 3.3+. - New website and documentation based on Sphinx (finally!) - Lexers added: * APL (#969) * Agda and Literate Agda (pull request #203) * Alloy (pull request #355) * AmbientTalk * BlitzBasic (pull request #197) * ChaiScript (pull request #24) * Chapel (pull request #256) * Cirru (pull request #275) * Clay (pull request #184) * ColdFusion CFC (pull request #283) * Cryptol and Literate Cryptol (pull request #344) * Cypher (pull request #257) * Docker config files * EBNF (pull request #193) * Eiffel (pull request #273) * GAP (pull request #311) * Golo (pull request #309) * Handlebars (pull request #186) * Hy (pull request #238) * Idris and Literate Idris (pull request #210) * Igor Pro (pull request #172) * Inform 6/7 (pull request #281) * Intel objdump (pull request #279) * Isabelle (pull request #386) * Jasmin (pull request #349) * JSON-LD (pull request #289) * Kal (pull request #233) * Lean (pull request #399) * LSL (pull request #296) * Limbo (pull request #291) * Liquid (#977) * MQL (pull request #285) * MaskJS (pull request #280) * Mozilla preprocessors * Mathematica (pull request #245) * NesC (pull request #166) * Nit (pull request #375) * Nix (pull request #267) * Pan * Pawn (pull request #211) * Perl 6 (pull request #181) * Pig (pull request #304) * Pike (pull request #237) * QBasic (pull request #182) * Red (pull request #341) * ResourceBundle (#1038) * Rexx (pull request #199) * Rql (pull request #251) * Rsl * SPARQL (pull request #78) * Slim (pull request #366) * Swift (pull request #371) * Swig (pull request #168) * TADS 3 (pull request #407) * Todo.txt todo lists * Twig (pull request #404) - Added a helper to "optimize" regular expressions that match one of many literal words; this can save 20% and more lexing time with lexers that highlight many keywords or builtins. - New styles: "xcode" and "igor", similar to the default highlighting of the respective IDEs. - The command-line "pygmentize" tool now tries a little harder to find the correct encoding for files and the terminal (#979). - Added "inencoding" option for lexers to override "encoding" analogous to "outencoding" (#800). - Added line-by-line "streaming" mode for pygmentize with the "-s" option. (pull request #165) Only fully works for lexers that have no constructs spanning lines! - Added an "envname" option to the LaTeX formatter to select a replacement verbatim environment (pull request #235). - Updated the Makefile lexer to yield a little more useful highlighting. - Lexer aliases passed to ``get_lexer_by_name()`` are now case-insensitive. - File name matching in lexers and formatters will now use a regex cache for speed (pull request #205). - Pygments will now recognize "vim" modelines when guessing the lexer for a file based on content (pull request #118). - Major restructure of the ``pygments.lexers`` module namespace. There are now many more modules with less lexers per module. Old modules are still around and re-export the lexers they previously contained. - The NameHighlightFilter now works with any Name.* token type (#790). - Python 3 lexer: add new exceptions from PEP 3151. - Opa lexer: add new keywords (pull request #170). - Julia lexer: add keywords and underscore-separated number literals (pull request #176). - Lasso lexer: fix method highlighting, update builtins. Fix guessing so that plain XML isn't always taken as Lasso (pull request #163). - Objective C/C++ lexers: allow "@" prefixing any expression (#871). - Ruby lexer: fix lexing of Name::Space tokens (#860) and of symbols in hashes (#873). - Stan lexer: update for version 2.4.0 of the language (pull request #162, PR#255, PR#377). - JavaScript lexer: add the "yield" keyword (pull request #196). - HTTP lexer: support for PATCH method (pull request #190). - Koka lexer: update to newest language spec (pull request #201). - Haxe lexer: rewrite and support for Haxe 3 (pull request #174). - Prolog lexer: add different kinds of numeric literals (#864). - F# lexer: rewrite with newest spec for F# 3.0 (#842), fix a bug with dotted chains (#948). - Kotlin lexer: general update (pull request #271). - Rebol lexer: fix comment detection and analyse_text (pull request #261). - LLVM lexer: update keywords to v3.4 (pull request #258). - PHP lexer: add new keywords and binary literals (pull request #222). - external/markdown-processor.py updated to newest python-markdown (pull request #221). - CSS lexer: some highlighting order fixes (pull request #231). - Ceylon lexer: fix parsing of nested multiline comments (#915). - C family lexers: fix parsing of indented preprocessor directives (#944). - Rust lexer: update to 0.9 language version (pull request #270, PR#388). - Elixir lexer: update to 0.15 language version (pull request #392). - Fix swallowing incomplete tracebacks in Python console lexer (#874).

protobuf-c (1.2.1) [ Robert Edmonds ] * Release 1.2.1. [ Paolo Borelli ] * protoc-c: Generate code that uses the universal zero initializer {0} when initializing a oneof union (#187, #205). protobuf-c (1.2.0) [ Robert Edmonds ] * Release 1.2.0. [ Ilya Lipnitsky ] * Implement the "optimize_for = CODE_SIZE" option (#183). * Eliminate undefined behavior in zigzag functions (#198). * Pack negative enum values correctly (#199). [ Peter Leschev ] * Fix protobuf_c_message_get_packed_size() on 16-bit systems (#196, #197). [ Diego Elio Pettenò ] * Update link to Autotools Mythbuster to canonical site (#201). [ Zex Li ] * Skip test suite when cross-compiling (#184).

kramdown 1.10.0 released This release brings the usual bug fixes but also support for the strikethrough syntax in the GFM parser as well as some enhancements regarding the specification of language names for syntax highlighting purposes. Changes * 4 minor changes: o Support for the math-engine MathJax-Node was updated to use the new mathjax-node package (fixes #313, pull request by Tom Thorogood) o URL query parameters can now be appended to language names specified in fenced code blocks if the syntax highlighting engine accepts them (fixes #234) o Added strikethrough syntax to the GFM parser (fixes #184 and #307; initial pull request by Diego Galeota, updated by Parker Moore) o Allow almost all characters in class names that are defined via a special syntax (fixes #318, requested by cabo) * 4 bug fixes: o Fixed a problem where Kramdown::Document.new would only accept the symbol :input but not the string ¡Æinput¡Ç as valid key (fixes #312, pull request by Sun Yaozhu) o Fixed inconsistent behavior: Empty link text is now also allowed for normal links, not just images (fixes #305, reported by cabo) o The HTML5 <mark> element is now recognized as span level element (fixes #298, reported by Niclas Darville) o Fixed problem where e-mail autolinks containing an underscore character were not correctly recognized (fixes #293, reported by erikse) * 3 other fixes: o Fixed missing package update statement for Travis (by Parker Moore) o Add some more documentation regarding MathJax (fixes #296, pull request by Christopher Jefferson) o Fixed bad link in API documentation (fixes #315, reported by Tom MacWright)

v20.6.7 ------- * Issue #523: Disabled support for environment markers introduced in v20.5. v20.6.6 ------- * Issue #503: Restore support for PEP 345 environment markers by updating to Packaging 16.6. v20.6.0 ------- * New release process that relies on `bumpversion <https://github.com/peritus/bumpversion>`_ and Travis CI for continuous deployment. * Project versioning semantics now follow `semver <https://semver.org>`_ precisely. The 'v' prefix on version numbers now also allows version numbers to be referenced in the changelog, e.g. https://pythonhosted.org/setuptools/history.html#v20-6-0. 20.5 ---- * BB Pull Request #185: Add support for environment markers in requirements in install_requires, setup_requires, tests_require as well as adding a test for the existing extra_requires machinery. 20.4 ---- * Issue #422: Moved hosting to `Github <https://github.com/pypa/setuptools>`_ from `Bitbucket <https://bitbucket.org/pypa/setuptools>`_. Issues have been migrated, though all issues and comments are attributed to bb-migration. So if you have a particular issue or issues to which you've been subscribed, you will want to "watch" the equivalent issue in Github. The Bitbucket project will be retained for the indefinite future, but Github now hosts the canonical project repository. 20.3.1 ------ * Issue #519: Remove import hook when reloading the ``pkg_resources`` module. * BB Pull Request #184: Update documentation in ``pkg_resources`` around new ``Requirement`` implementation. 20.3 ---- * BB Pull Request #179: ``pkg_resources.Requirement`` objects are now a subclass of ``packaging.requirements.Requirement``, allowing any environment markers and url (if any) to be affiliated with the requirement * BB Pull Request #179: Restore use of RequirementParseError exception unintentionally dropped in 20.2.

- Fix incorrectly reporting files containing disabled formatting as being formatted. - Fix incorrect handling of quoted arguments in the options file (#321). - Fix error in identifying an enum return type as an enumeration (#322, 323). - Fix error in identifying an enum argument as an enumeration (#327). - Fix recognition of Qt keywords when used as variables in C++ (#329). - Fix recognition of a pointer in a C++ cast (#316). - Fix removing trailing whitespace after a changed pointer or reference cast. - Add new bracket style option "style=vtk" (#155). - Add new option "indent-preproc-block" to indent blocks of preprocessor directives (#21, #114, #229, #242, #294). - Add new option, "dry-run", to run AStyle without updating the files (#184, #285). - Add new options, "html" (-!") and "html=###", to display the HTML help documentation in the default browser. - Add tags "*INDENT-OFF*" and "*INDENT_ON*" to disable formatting of source code blocks (#2, #47, #55, #78, #110, #176). - Add tag *NOPAD* to disable selected formatting on a single line. - Add '__attribute__ ((visibility ("default")))' to Linux exported functions. - Remove option "style=ansi" and make it depreciated (#146). - Remove fix for broken 'case' statements from release 2.02.1, Nov 21, 2011. - Improve Korean translation (#256). - Change shared libraries to include the version number as part of the file name (#264) - Change "help" display to stdout to allow piping and redirection (#63). - Change "version" display to stdout. - Change headers to include foreach, forever, Q_FOREACH, and Q_FOREVER (#98, #154). - Change compiler definition ASTYLE_NO_VCX (no Visual Studio exports) to ASTYLE_NO_EXPORTS. - Change shared library error handler argument from "char*" to "const char*". - Fix not recognizing noexcept, interrupt, and autoreleasepool as pre-command headers (#225, #259). - Fix formatting of C++11 uniform initializer brackets (#253, #257, #260, #284). - Fix to not automatically space pad C++11 uniform initializer brackets (#275). - Fix formatting of enums with leading commas (#159, #179, #270). - Fix formatting of logical && operator in class initializers (#290). - Fix flagging a 'const' variable as a 'const' method (#275). - Fix piping and redirection adding an extra character to the output (#245, #252, #305). - Fix "indent-modifiers" to attach class access modifiers to Horstmann style brackets. - Fix ASFormatter to correctly recognize the end of a C++ raw string literal (#261). - Fix to recognize C++11 "enum class" as an enum (#303). - Fix indent of C++11 "noexecpt" statements within a class (#260, #304). - Fix not resetting templateDepth when a template was not found (#295). - Fix formatting of multiplication in a block paren (#144). - Fix whitespace padding when formatting an rvalue references (#297). - Fix to recognize an rvalue reference without a name (#265). - Fix to not identify an operator overload method as a calculation (#296). - Fix concatenating multiplication with a pointer dereference (#291). - Fix recognition of a pointer dereference following a question mark (#213). - Fix extra space after a trailing reference type (#300). - Fix _asm blocks not being identified as a block opener and the variable not cleared on exit (#163). - Fix indentation of line comments before a "class" opening bracket. - Fix indentation of line comments before a "namespace" opening bracket. - Fix isBracketType() method to correctly process a NULL_TYPE. - Fix unpad-paren to recognize additional variables (#43, #132, #143). - Fix indentation of C# "let" statements. - Fix a few omissions with "fill-empty-lines". - Fix file read to read 64K blocks of data. - Refactor to un-obfuscate (clarify) the code, and improve design and decomposition:: - Extract class Utf8_16 from ASConsole. - Replace Linux dependency on iconv with a Utf8_16 class for ASLibrary. - Move global "using" statements to the astyle namespace in astyle.h and ASLocalizer.h. - Move shared library declarations from astyle.h to astyle_main.h. - Move indentable macros from ASEnhancer to ASResource and create static pairs. - Simplify ASBeautifier procedure to identify the colon (:) type. - Major refactoring in ASBeautifier to create separate variables for an enum, a class statement and a class initializer. - This was needed to fix the processing of C++11 uniform initializers in a class initializer. - Minor changes to ASFormatter and ASBeautifier based on results of the Clang analyzer. - Change several methods in astyle_main to "const".

@nbecker

Fix CPU detection patch while here. Changes from 2.5.2 to 2.6.0 =========================== - Introduced a new re_evaluate() function for re-evaluating the previous executed array expression without any check. This is meant for accelerating loops that are re-evaluating the same expression repeatedly without changing anything else than the operands. If unsure, use evaluate() which is safer. - The BLOCK_SIZE1 and BLOCK_SIZE2 constants have been re-checked in order to find a value maximizing most of the benchmarks in bench/ directory. The new values (8192 and 16 respectively) give somewhat better results (~5%) overall. The CPU used for fine tuning is a relatively new Haswell processor (E3-1240 v3). - The '--name' flag for `setup.py` returning the name of the package is honored now (issue #215). Changes from 2.5.1 to 2.5.2 =========================== - conj() and abs() actually added as VML-powered functions, preventing the same problems than log10() before (PR #212). Thanks to Tom Kooij for the fix! Changes from 2.5 to 2.5.1 ========================= - Fix for log10() and conj() functions. These produced wrong results when numexpr was compiled with Intel's MKL (which is a popular build since Anaconda ships it by default) and non-contiguous data (issue #210). Thanks to Arne de Laat and Tom Kooij for reporting and providing a nice test unit. - Fix that allows numexpr-powered apps to be profiled with pympler. Thanks to @nbecker. Changes from 2.4.6 to 2.5 ========================= - Added locking for allowing the use of numexpr in multi-threaded callers (this does not prevent numexpr to use multiple cores simultaneously). (PR #199, Antoine Pitrou, PR #200, Jenn Olsen). - Added new min() and max() functions (PR #195, CJ Carey). Changes from 2.4.5 to 2.4.6 =========================== - Fixed some UserWarnings in Solaris (PR #189, Graham Jones). - Better handling of MSVC defines. (#168, Francesc Alted). Changes from 2.4.4 to 2.4.5 =========================== - Undone a 'fix' for a harmless data race. (#185 Benedikt Reinartz, Francesc Alted). - Ignore NumPy warnings (overflow/underflow, divide by zero and others) that only show up in Python3. Masking these warnings in tests is fine because all the results are checked to be valid. (#183, Francesc Alted). Changes from 2.4.3 to 2.4.4 =========================== - Fix bad #ifdef for including stdint on Windows (PR #186, Mike Sarahan). Changes from 2.4.3 to 2.4.4 =========================== * Honor OMP_NUM_THREADS as a fallback in case NUMEXPR_NUM_THREADS is not set. Fixes #161. (PR #175, Stefan Erb). * Added support for AppVeyor (PR #178 Andrea Bedini) * Fix to allow numexpr to be imported after eventlet.monkey_patch(), as suggested in #118 (PR #180 Ben Moran). * Fix harmless data race that triggers false positives in ThreadSanitizer. (PR #179, Clement Courbet). * Fixed some string tests on Python 3 (PR #182, Antonio Valentino). Changes from 2.4.2 to 2.4.3 =========================== * Comparisons with empty strings work correctly now. Fixes #121 and PyTables #184. Changes from 2.4.1 to 2.4.2 =========================== * Improved setup.py so that pip can query the name and version without actually doing the installation. Thanks to Joris Borgdorff. Changes from 2.4 to 2.4.1 ========================= * Added more configuration examples for compiling with MKL/VML support. Thanks to Davide Del Vento. * Symbol MKL_VML changed into MKL_DOMAIN_VML because the former is deprecated in newer MKL. Thanks to Nick Papior Andersen. * Better determination of methods in `cpuinfo` module. Thanks to Marc Jofre. * Improved NumPy version determination (handy for 1.10.0). Thanks to Åsmund Hjulstad. * Benchmarks run now with both Python 2 and Python 3. Thanks to Zoran Plesivčak. Changes from 2.3.1 to 2.4 ========================= * A new `contains()` function has been added for detecting substrings in strings. Only plain strings (bytes) are supported for now. See PR #135 and ticket #142. Thanks to Marcin Krol. * New version of setup.py that allows better management of NumPy dependency. See PR #133. Thanks to Aleks Bunin. Changes from 2.3 to 2.3.1 ========================= * Added support for shift-left (<<) and shift-right (>>) binary operators. See PR #131. Thanks to fish2000! * Removed the rpath flag for the GCC linker, because it is probably not necessary and it chokes to clang.

pkgsrc changes: - set license - revamp build definitions - revamp blk3.mk and bump API_DEPENDS to 0.13 (recent software depends on new ode-config) - drop all local patches as not needed upstream changes: Changes for 0.13 New features: Stable, implicit gyroscopic forces (patch #185 by Joseph Cooper). Bodies with gyroscopic forces won't gain energy anymore. New joint: transmission joint (patch #182 by Dimitris Papavasiliou). Contacts now have rolling friction (patch #184 by Joseph Cooper). Removed the need for defining dSINGLE/dDOUBLE; this is stored now in the generated ode/precision.h header. New joint: Double Ball (AKA "distance joint"). New joint: Double Hinge. Threaded execution support interface added. Optional built-in threading implementation added. Internal threading implementation is excluded by default and to be used, it must be enabled with configure/premake: --disable-threading-intf (--no-threading-intf for Windows/Premake). This allows disabling threading interface support. Bug fixes Joint feedback forces application fixed in QuickStep implementation Bug #89 by Luc: (dJointAddSliderForce() adds a zero force when the parent body is NULL) Bug #88 by Luc: heightfield data assigned to a wrong field in dGeomHeightfieldSetHeightfieldData Fixed cylinder AABB computation. Removed ALLOCA calls from dHashSpace; it should not depend on stack size limits anymore. Bugs in AMotor joint (patch #181) Bugs in PU joint (patch #186) Fixed issue with friction and non-friction constraints being intermixed during constraints random reordering in QuickStep. Fixed matrix inversion bug (patch #183). Fixed issue with some kinds of joints (Ball, DBall, DHinge, Fixed) might overwrite world ERP value with their custom ERP during getInfo2() call and that inappropriate value would then be passed to subsequent joints in solver instead of world ERP. Fixed issues reported in patches #151 and #22 (collisions with SAPSpace and QuadTreeSpace might not work because geometries list was misused in them). Fixed IsPointInPolygon in convex.cpp (patch #160 by Janis Rucis) Fixed zero comparisons in OPCODE to use relative error instead of absolute epsilon value (found by Bill Sellers) Fixed dhinge's last constraint to properly handle rotations. Fixed plane2d joint: uninitialized variables (reported by Dimitris Papavasiliou) Bug #80 by Georg Martius: better handling of capsule-box with deep penetrations. Fixed zero-mu issues: now either mu or mu2 can be set to zero. Other changes Public headers cleaned to cause less pollution of typedefs and macros. Changes for 0.12 Added python bindings, contributed by Gideon Klompje. Integrated libccd from Daniel Fiser, provides new colliders based on GJK, EPA and MPR. Now cylinders can collide with cylinders! New functions have been added: dWorldUseSharedWorkingMemory() dWorldCleanupWorkingMemory() dWorldSetStepMemoryReservationPolicy() dWorldSetStepMemoryManager() dGeomLowLevelControl(): change/query OPCODE trimesh-sphere contact merging behavior at runtime. dGeomGetRelPointPos() (patch #2991622) dGeomGetPosRelPoint() (patch #2991622) dGeomVectorToWorld() (patch #2991622) dGeomVectorFromWorld() (patch #2991622) dWorldStepFast1 API removed along with dWorld[Get/Set]AutoEnableDepthSF1 dWorldStep() and dWorldQuickStep() have been changed to return boolean success status, and avoid allocation on stack. dInitODE2() changed to automatically call AllocateODEDataForThread(dAllocateFlagBasicData) after library initialization. Made sure neither dSINGLE or dDOUBLE is defined by default; the user should always explicitly specify the precision. Fixed a bug in dGeomCopyOffsetRotation(). Macros changed to static inline functions in odemath.h and related files. Improvement for trimesh-plane collision. odecpp classes changed to be inheritable and easily expandable QuadTreeSpace implementation corrected to avoid object-block relation ambiguity due to numeric errors. Fixed bug affecting disabled joints and dWorldStep. Added extern "C" wrapper to dWorldExportDIF(). Fixed bug #2937076: don't try to build demos if drawstuff is disabled. Applied patch #2931174 to make demos work for recent MacOS. Applied patch #2931177 to fix the demos' framerate on X11. Applied patch #2995450 to generate up to four contacts for box-plane collision test and fix contact depths. Applied patch #3030783 to fix drawstuff dimensions being ignored in OSX GLUT port. Applied patch #3429454: fix compilation on some platforms. Heightfield zone boundaries calculation code fixed to also consider whole next cell after the AABB if the AABB ends exactly at the cell boundary. New demo: demo_tracks. Fixed a box-capsule bug: more reasonable normal for deep penetrations. Many internal fixes to world stepping and collision detection code. Changes for 0.11.1 Made the new trimesh collider the default. Added a "-texturepath" option to drawstuff. Heightfield rotation fixed to avoid NaNs while rotating infinite MIN/MAX heights. Incorrect parameter order fixed on contact merging in Sphere-Trimesh collisions. Fixed bug #2685170: use the C99 __func__ instead of __FUNCTION__ when a C99 implementation is available. Remove unused code in demo_joints.cpp. Fix bug in collision categories in demo_jointPU. Added a possibility to initialize/close ODE multiple times recursively has been added. Also, now a call to dSpaceSetManualCleanup() is required for each space right after creation if ODE has been initialized in thread data manual cleanup mode. Thread local data has been cleaned up from OPCODE and OdeTls. New house of cards demo, which stresses the friction handling stability. Changes for 0.11 This release contains many joint-related bug fixes, and some new features like kinematic bodies, better convex-convex collision detection and some extra functions. Fix bug: Fix problem when attaching no body to a joint. Fix problem with dJointGetUniversalAngle2 when the joint is attached to only a body 2. The sign was inverted. Fix bug reported by Tilman: dxJointPU::getInfo1 was setting twice the limit of limot1 to zero and not limot2. Fixed a bug in dSpaceCollide2: if both geoms are not in spaces they would not have valid AABBs. Swapped geometries returned in contacts for OPCODE Trimesh-Plane collisions as they were returned in unnatural order being different from that in GIMPACT Fixed an inverted sign problem on positions of joints PU and PR. Fix bug: when a slider, piston, pu or pr joint had only one body attached to position 2, dJointAttach(jId, 0, bId). The body was not push in the right direction to move back between the limits. Fix bug in dJointGetPUAxis2: the axis was not multiplied with the the rotation matrix of the good body. Fix bug if there is only one body on the PU joint the axis returned was not the right one. New functions: dJointSetUniversalAxis1Offset and dJointSetUniversalAxis2Offset. New functions: dJointEnable, dJointDisable, dJointIsEnabled (patch #2454764). New functions: dGeomTriMeshSetTriMergeCallback/dGeomTriMeshGetTriMergeCallback. New function: void dJointSetPUAnchorOffset (deprecating dJointSetPUAnchorDelta). New functions: dJointGetPRAngle and dJointGetPRAngleRate. New functions: dBodyGetGyroscopicMode and dBodySetGyroscopicMode (patch #2019242). Applied patch #2538046: Heightfield AABB bounds patch. Applied patch #2381592, which adds support for Kinematic Bodies. Applied a patch to make GIMPACT trimesh-ray collisions to be consistent with those in OPCODE (bug #2214623). Applied a patch to make side1, side2 fields of contact structure be always initialized. Applied patch #2158425: This patch enable GIMPACT to work on 64-bit machine. Applied patch #2080674: Improved dBodySetRotation; now exact rotation matrices are preserved until the next simulation step. Enable the motor on the rotoide part of the PR joint. Added Blender script to create ODE convex geoms under tools. Convex-Convex collision detection code is finally (nearly) stable. Changes for 0.10.1 This is a bugfix release, so you shouldn't expect anything to stop working from 0.10. New function: dJointSetPistonAnchorOffset Add new function dJointSetHingeAxisDelta Fix problem with dJointGetPistonPosition and dJointGetPistonPositionRate when the joint is attached to only a body 2. The sign was inversed. Update the slider joint to have the same behavior as the other joint when there is only a body2 attached to it. Rename the new function dJointSetHingeAxisDelta to dJointSetHingeAxisOffset. This will remove confusion with the old function dJointSetHingeAnchorDelta. Bug fix: Max Correcting Vel behavior is now the same as before 0.10. Changes for 0.10 New functions: dInitODE2(), dAllocateODEDataForThread(), dCleanupODEAllDataForThread(). This adds support for ability to run collision detection from multiple threads for separate spaces. New functions: dCheckConfiguration(), dGetConfiguration(), to test how ODE was compiled. New function: dJointGetNumBodies (patch #1901550). New function: dSpaceGetClass (patch #1901637). New function: dSetColliderOverride(), to register custom collision handling functions. Added damping and MaxAngularVel() functions. Applied patch #1335202: Contact Joint Motion (see demo_motion.cpp). Applied patch #1851394: support for GIMPACT with double precision, dCollide fix. Applied patch #1813079 (moved callback). Added possibility to collide a space of lower sublevel as a geometry against another space of a higher level with dSpaceCollide2. dSpaceSetSublevel/dSpaceGetSublevel are used for sublevel assignment/retrieval. Fixed a bug in dJointXXXGetInfo. The value in limot.limit was not always updated. (Ex: If hi and lo limit were changed). New Joint: Prismatic Universal (patch #1828454). New Joint: Piston, with demo. Disabled building shared library by default with autotools. ODE shouldn't be installed as a system library. Fixed drawstuff build issues on OSX. Removed release and debug flags for configure.in: CPPFLAGS, CFLAGS, CXXFLAGS should be set by the user to their liking, respecting autotools policies. Added 'Sweep and Prune' collision space. Optimizations, many bug fixes, and code cleanup. Changes from 0.8 to 0.9 New Feature: CONTACTS_UNIMPORTANT flag added for dCollide() to allow canceling any contact improvements and return any contacts found as soon as possible New feature: Add erp/cfm parameters to fixed and ball joint. SF PATCH 1478244 Assert on zero normalizations, add dSafeNormalize. Added boolean result for dNormalize3() and dNormalize4() so that normalization success could be checked SF Patch 1808007: fix gimpact compiler warning Apply SF patch 1800579: dGeomTriMeshSetData does not work with GIMPACT Fix: heightfield collision could return less contacts than was possible Fix: the deepest contact might be not selected if there was a lack of contact slots in trimesh-trimesh and trimesh-box cases (function exited immediately and did not check for possible contact coincidences). Improvement: optimizations for GIMPACT versions of trimesh-capsule, trimesh-trimesh, trimesh-plane, trimesh-sphere Improvement: dCollideConvexPlane optimized Fix: cylinder-box collision did not respect requested contact count limit Fix SF issue 1729096 by adding dMassSetTrimeshTotal Apply SF patch 1685107: Enforce 1 contact request Apply SF Patch 1697014: Update JointPR code Catch SF BUG 1621938: gimpact only does stride 12. patch 1769851 by Jon Watte: recalc aabb when new setting new data Added Richard Barrington's model loader for XNA (to be used with ODE.NET) 1586733 collision_trimesh_trimesh.cpp OPCODE fix Added Francisco Leon's alternate trimesh-trimesh collider. 1691402 Heighfield performance patch patch 1696933 Fix bug in dWorldExportDIF when joint in "limbo" Renamed "tests" to "demos" and split out unit test project. Updated premake scripts and Visual Studio files; automake files still need to be updated. Make building demos optional. SF patch 1650563 lib64 fixes, SF patch 1646598 Warn against using double precision with gimpact Many more bug fixes and optimizations. Changes from 0.7 to 0.8 New Rotoide - Prismatic Joint Optimisation when dGYROSCOPIC is disabled (default) dJointGetUniversalAngles to efficiently get both angles at once. Changes from 0.6 to 0.7 New heightfield primitive for terrains. Trimesh-Plane collision. Ray-Cylinder collision. Integration of the plane-2d joint. Improved support for convex hulls. Fix for joint limit handling. Half-space optimisation for axis aligned planes. Changes from 0.5 to 0.6 Added flat-capped cylinders. CCylinder has been renamed as Capsule. Added support for geom offsets. Improved stepping function (dWorldQuickStep) Much improved support for trimesh collision shapes Added support for 64-bit systems Started support for convex hulls New and improved build system Lots of bug fixes, stability, and performance improvements Geom Offset Overview Geom offsets allow geom objects to be offset from a body's position. This is useful for cases where an object has an offset centre of mass, or is made up out of several geoms each with their own local position. Native support for geom offsets means that the geomTransform container is now obselete. The real advantage over geomTransform is that there is a much easier interface for setting, getting, and modifying a geom's offset from its body. The elimination of geomTransform simplifies callbacks which no longer have to special case that geom class type. In terms of performance, the new code has a negligible performance difference and a memory improvement compared to using a geomTransform. Geom Offset and Bodies An offset only makes sense for geoms which are connected to bodies. It is an error to attempt to set an offset for a geom which is not connected to a body. When a geom is disconnected from a body, any offset will be automatically eliminated. Thus, the possible states a geom can be in are: Geom Geom on body Geom on body, with an offset To create an offset, just call on of the geomSetOffset functions. The offset will be automatically created if it does not yet exist. Geom offsets are normally set by specifying the offset in local coordinates. An extra set of functions are provided to allow an offset to be determined by providing world coordinates and subtracting them from the current body position. These second set of functions, geomSetOffsetWorldPosition(),etc, allow the user to essentially say "keep the body where it is, and move its geom to this position in the world". Geom Offset API This is defined in the doxygen documentation. Geom Offset affect on existing API The following functions have been updated such that they transparently work with offsets. void dGeomSetPosition (dGeomID, dReal x, dReal y, dReal z) void dGeomSetRotation (dGeomID, const dMatrix3 R) void dGeomSetQuaternion (dGeomID, const dQuaternion) const dReal * dGeomGetPosition (dGeomID) const dReal * dGeomGetRotation (dGeomID) void dGeomGetQuaternion (dGeomID, dQuaternion result) void dGeomGetAABB (dGeomID, dReal aabb[6]) The functions that get a geom's position will return its final position in world coordinates. If a geom is offset, it is no longer true that dGeomGetPosition()==dBodyGetPosition(). Instead, each will return its own world position, with the geom being offset from the body. The functions that set a geom's position will move the body to the position such that the geom will have the position passed in. So if the geom has a positional offset of (0,0,1), and we call dGeomSetPosition(g,10,10,10), the end result will be the body's position being set to (10,10,9). As such, either dGeomSetPosition or dBodySetPosition can be used, depending on which is more convenient. The other position is automatically updated. Geom Offset and geomTransform GeomTransforms are still supported, and all existing code transparently works. When writing new code, however, it is far easier to work with geoms and offsets. The change eliminates a large amount of special casing needed to do when working with geomTransforms. Setting an offset is trivial, and does not require inserting or removing new GeomTransforms from spaces. There is no need to special case getting an offset geom's world position, or setting an offset geom's world position. It is especially useful in the collide callback. The old way required getting the object as the real geom (but without being able to easily grab its Transform, or even its body!), or as its Transform (forcing special casing code to extract the real geom in that case).

3.10 (2016-05-26) ----------------- New: - Updated components description to better comply with RFC 5545. Refs #183. [stlaz] - Added PERIOD value type to date types. Also fixes incompatibilities described in #184. Refs #189. [stlaz] Fixes: - Fix testsuite for use with ``dateutil>=2.5``. Refs #195. [untitaker] - Reintroduce cal.Component.is_broken that was removed with 3.9.2. Refs #185. [geier] 3.9.2 (2016-02-05) ------------------ New: - Defined ``test_suite`` in setup.py. Now tests can be run via ``python setup.py test``. [geier] Fixes: - Fixed cal.Component.from_ical() representing an unknown component as one of the known. [stlaz] - Fixed possible IndexError exception during parsing of an ical string. [stlaz] - When doing a boolean test on ``icalendar.cal.Component``, always return ``True``. Before it was returning ``False`` due to CaselessDict, if it didn't contain any items. [stlaz] - Fixed date-time being recognized as date or time during parsing. Added better error handling to parsing from ical strings. [stlaz] - Added __version__ attribute to init.py. [TomTry] - Documentation fixes. [TomTry] - Pep 8, UTF 8 headers, dict/list calls to literals. [thet] 3.9.1 (2015-09-08) ------------------ - Fix ``vPeriod.__repr__``. [spacekpe] - Improve foldline() performance. This improves the foldline performance, especially for large strings like base64-encoded inline attachements. In some cases (1MB string) from 7 Minutes to less than 20ms for ASCII data and 500ms for non-ASCII data. Ref: #163. [emfree] 3.9.0 (2015-03-24) ------------------ - Creating timezone objects from VTIMEZONE components. [geier] - Make ``python-dateutil`` a dependency. [geier] - Made RRULE tolerant of trailing semicolons. [sleeper] - Documentation fixes. [t-8ch, thet] 3.8.4 (2014-11-01) ------------------ - Add missing BYWEEKNO to recurrence rules. [russkel]

--------------------------- * version 2.6.1 released 2016-03-01 ** flex resources *** The flex project is now hosted at github. Consider this a "period of transition". In particular, you should start at https://github.com/westes/flex for the flex codebase, issue tracking and pull requests. *** New releases of flex are to be found at https://github.com/westes/flex/releases. ** flex internals *** Flex now uses more modern and more standard names for variable types. There's more work to be done on that front yet, though. *** A number of compiler warnings have been remedied. *** Line directives should now work as expected and be absent when that is expected. ** test suite *** When running the test suite, c++ files are compiled with the c++ header inside the flex distribution, rather than relying on the build system's flex header , which might not be installed yet or which might be out of date with respect to what flex tests expect. *** Some portability fixes in the test suite such as opening files for reading in binary mode ** Building flex *** The file src/scan.c asdistributed with flex source is now built with the current version of flex. Occasionally this had to be done manually to pick up new flex features. It's now just a part of flex's build system. *** The pdf version of the manual is no longer distributed with flex, although if you have the texinfo package installed, you can still build it. *** lots of general build system cleanup *** the build system tries a bit harder to find libtoolize and texi2dvi. *** When help2man and texi2dvi are missing, the error messages are now much more helpful. ** bug fixes *** resolved github issues #53, #54, #55, #61. *** Resolved sf bugs #128, #129, #155, #160, #184, #187, #195. (pkgsrc changes) - Githubify - pre-configure: stage set for ./autogen.sh - Add patch-src_Makefile.am to generate parse.h before main.c is compiled (MAKE_JOBS_SAFE = no without this patch) - Drop (or convert) patches patch-src_filter.c -- upstream taken patch-src_Makefile.in -- file is gone patch-src_Makefile.am converted to the same name, different purpose patch-tests_Makefile.in converted to patch-tests_Makefile.am - Add BUILD_DEPENDS+= help2man-[0-9]*:../../converters/help2man

@savraj

NEWS: Version 2.5.3 ------------- - Updated zoneinfo to 2016d - Fixed parser bug where unambiguous datetimes fail to parse when dayfirst is set to true. (gh issue #233, pr #234) - Bug in zoneinfo file on platforms such as Google App Engine which do not do not allow importing of subprocess.check_call was reported and fixed by @savraj (gh issue #239, gh pr #240) - Fixed incorrect version in documentation (gh issue #235, pr #243) Version 2.5.2 ------------- - Updated zoneinfo to 2016c - Fixed parser bug where yearfirst and dayfirst parameters were not being respected when no separator was present. (gh issue #81 and #217, pr #229) Version 2.5.1 ------------- - Updated zoneinfo to 2016b - Changed MANIFEST.in to explicitly include test suite in source distributions, with help from @koobs (gh issue #193, pr #194, #201, #221) - Explicitly set all line-endings to LF, except for the NEWS file, on a per-repository basis (gh pr #218) - Fixed an issue with improper caching behavior in rruleset objects (gh issue #104, pr #207) - Changed to an explicit error when rrulestr strings contain a missing BYDAY (gh issue #162, pr #211) - tzfile now correctly handles files containing leapcnt (although the leapcnt information is not actually used). Contributed by @hjoukl (gh issue #146, pr #147) - Fixed recursive import issue with tz module (gh pr #204) - Added compatibility between tzwin objects and datetime.time objects (gh issue #216, gh pr #219) - Refactored monolithic test suite by module (gh issue #61, pr #200 and #206) - Improved test coverage in the relativedelta module (gh pr #215) - Adjusted documentation to reflect possibly counter-intuitive properties of RFC-5545-compliant rrules, and other documentation improvements in the rrule module (gh issue #105, gh issue #149 - pointer to the solution by @phep, pr #213). Version 2.5.0 ------------- - Updated zoneinfo to 2016a - zoneinfo_metadata file version increased to 2.0 - the updated updatezinfo.py script will work with older zoneinfo_metadata.json files, but new metadata files will not work with older updatezinfo.py versions. Additionally, we have started hosting our own mirror of the Olson databases on a github pages site (https://dateutil.github.io/tzdata/) (gh pr #183) - dateutil zoneinfo tarballs now contain the full zoneinfo_metadata file used to generate them. (gh issue #27, gh pr #85) - relativedelta can now be safely subclassed without derived objects reverting to base relativedelta objects as a result of arithmetic operations. (lp:1010199, gh issue #44, pr #49) - relativedelta 'weeks' parameter can now be set and retrieved as a property of relativedelta instances. (lp: 727525, gh issue #45, pr #49) - relativedelta now explicitly supports fractional relative weeks, days, hours, minutes and seconds. Fractional values in absolute parameters (year, day, etc) are now deprecated. (gh issue #40, pr #190) - relativedelta objects previously did not use microseconds to determine of two relativedelta objects were equal. This oversight has been corrected. Contributed by @elprans (gh pr #113) - rrule now has an xafter() method for retrieving multiple recurrences after a specified date. (gh pr #38) - str(rrule) now returns an RFC2445-compliant rrule string, contributed by @schinckel and @armicron (lp:1406305, gh issue #47, prs #50, #62 and #160) - rrule performance under certain conditions has been significantly improved thanks to a patch contributed by @dekoza, based on an article by Brian Beck (@exogen) (gh pr #136) - The use of both the 'until' and 'count' parameters is now deprecated as inconsistent with RFC2445 (gh pr #62, #185) - Parsing an empty string will now raise a ValueError, rather than returning the datetime passed to the 'default' parameter. (gh issue #78, pr #187) - tzwinlocal objects now have a meaningful repr() and str() implementation (gh issue #148, prs #184 and #186) - Added equality logic for tzwin and tzwinlocal objects. (gh issue #151, pr #180, #184) - Added some flexibility in subclassing timelex, and switched the default behavior over to using string methods rather than comparing against a fixed list. (gh pr #122, #139) - An issue causing tzstr() to crash on Python 2.x was fixed. (lp: 1331576, gh issue #51, pr #55) - An issue with string encoding causing exceptions under certain circumstances when tzname() is called was fixed. (gh issue #60, #74, pr #75) - Parser issue where calling parse() on dates with no day specified when the day of the month in the default datetime (which is "today" if unspecified) is greater than the number of days in the parsed month was fixed (this issue tended to crop up between the 29th and 31st of the month, for obvious reasons) (canonical gh issue #25, pr #30, #191) - Fixed parser issue causing fuzzy_with_tokens to raise an unexpected exception in certain circumstances. Contributed by @MichaelAquilina (gh pr #91) - Fixed parser issue where years > 100 AD were incorrectly parsed. Contributed by @Bachmann1234 (gh pr #130) - Fixed parser issue where commas were not a valid separator between seconds and microseconds, preventing parsing of ISO 8601 dates. Contributed by @RyansS (gh issue #28, pr #106) - Fixed issue with tzwin encoding in locales with non-Latin alphabets (gh issue #92, pr #98) - Fixed an issue where tzwin was not being properly imported on Windows. Contributed by @labrys. (gh pr #134) - Fixed a problem causing issues importing zoneinfo in certain circumstances. Issue and solution contributed by @alexxv (gh issue #97, pr #99) - Fixed an issue where dateutil timezones were not compatible with basic time objects. One of many, many timezone related issues contributed and tested by @labrys. (gh issue #132, pr #181) - Fixed issue where tzwinlocal had an invalid utcoffset. (gh issue #135, pr #141, #142) - Fixed issue with tzwin and tzwinlocal where DST transitions were incorrectly parsed from the registry. (gh issue #143, pr #178) - updatezinfo.py no longer suppresses certain OSErrors. Contributed by @bjamesv (gh pr #164) - An issue that arose when timezone locale changes during runtime has been fixed by @carlosxl and @mjschultz (gh issue #100, prs #107, #109) - Python 3.5 was added to the supported platforms in the metadata (@tacaswell gh pr #159) and the test suites (@moreati gh pr #117). - An issue with tox failing without unittest2 installed in Python 2.6 was fixed by @moreati (gh pr #115) - Several deprecated functions were replaced in the tests by @moreati (gh pr #116) - Improved the logic in Travis and Appveyor to alleviate issues where builds were failing due to connection issues when downloading the IANA timezone files. In addition to adding our own mirror for the files (gh pr #183), the download is now retried a number of times (with a delay) (gh pr #177) - Many failing doctests were fixed by @moreati. (gh pr #120) - Many fixes to the documentation (gh pr #103, gh pr #87 from @radarhere, gh pr #154 from @gpoesia, gh pr #156 from @awsum, gh pr #168 from @ja8zyjits) - Added a code coverage tool to the CI to help improve the library. (gh pr #182) - We now have a mailing list - [email protected], graciously hosted by Python.org. Version 2.4.2 ------------- - Updated zoneinfo to 2015b. - Fixed issue with parsing of tzstr on Python 2.7.x; tzstr will now be decoded if not a unicode type. gh #51 (lp:1331576), gh pr #55. - Fix a parser issue where AM and PM tokens were showing up in fuzzy date stamps, triggering inappropriate errors. gh #56 (lp: 1428895), gh pr #63. - Missing function "setcachesize" removed from zoneinfo __all__ list by @RyansS, fixing an issue with wildcard imports of dateutil.zoneinfo. (gh pr #66). - (PyPi only) Fix an issue with source distributions not including the test suite. Version 2.4.1 ------------- - Added explicit check for valid hours if AM/PM is specified in parser. (gh pr #22, issue #21) - Fix bug in rrule introduced in 2.4.0 where byweekday parameter was not handled properly. (gh pr #35, issue #34) - Fix error where parser allowed some invalid dates, overwriting existing hours with the last 2-digit number in the string. (gh pr #32, issue #31) - Fix and add test for Python 2.x compatibility with boolean checking of relativedelta objects. Implemented by @nimasmi (gh pr #43) and Cédric Krier (lp: 1035038) - Replaced parse() calls with explicit datetime objects in unit tests unrelated to parser. (gh pr #36) - Changed private _byxxx from sets to sorted tuples and fixed one currently unreachable bug in _construct_byset. (gh pr #54) - Additional documentation for parser (gh pr #29, #33, #41) and rrule. - Formatting fixes to documentation of rrule and README.rst. - Updated zoneinfo to 2015a.

Slightly based on wip/flex by Makoto Fujiwara and Juraj Lutter. * version 2.6.2 released 2016-10-24 ** flex internals *** a segfalt involving yyrestart(NULL) has been fixed *** flex should now handle quoting when mixed with m4 processing correctly *** flex handles `[[' and `]]' correctly *** flex no longer generates non-ANSI code *** more compilation warnings were squashed in generated scanners *** prevented a buffer overflow that could occur when input buffers were the exact wrong size ** test suite *** input filenames on MSWindows are now calculated correctly *** general code cleanups in a number of tests now make the test suite compile much more cleanly ** build system *** the xz archive has been replaced with an lzip archive *** a new option to configure --enable-warnings to encapsulate passing of warning-related flags which is useful in testing flex *** make indent now works for out of source builds *** Portability warnings when generating Makefile.in files are now suppressed; they were just noise and the use of GNU extensions in Makefile.{am,in,} was intentional and well known. ** bugs *** resolved gh#67 ** new sv translation from the translation project * version 2.6.1 released 2016-03-01 ** flex resources *** The flex project is now hosted at github. Consider this a "period of transition". In particular, you should start at https://github.com/westes/flex for the flex codebase, issue tracking and pull requests. *** New releases of flex are to be found at https://github.com/westes/flex/releases. ** flex internals *** Flex now uses more modern and more standard names for variable types. There's more work to be done on that front yet, though. *** A number of compiler warnings have been remedied. *** Line directives should now work as expected and be absent when that is expected. ** test suite *** When running the test suite, c++ files are compiled with the c++ header inside the flex distribution, rather than relying on the build system's flex header , which might not be installed yet or which might be out of date with respect to what flex tests expect. *** Some portability fixes in the test suite such as opening files for reading in binary mode ** Building flex *** The file src/scan.c asdistributed with flex source is now built with the current version of flex. Occasionally this had to be done manually to pick up new flex features. It's now just a part of flex's build system. *** The pdf version of the manual is no longer distributed with flex, although if you have the texinfo package installed, you can still build it. *** lots of general build system cleanup *** the build system tries a bit harder to find libtoolize and texi2dvi. *** When help2man and texi2dvi are missing, the error messages are now much more helpful. ** bug fixes *** resolved github issues TritonDataCenter#53, TritonDataCenter#54, TritonDataCenter#55, TritonDataCenter#61. *** Resolved sf bugs TritonDataCenter#128, TritonDataCenter#129, TritonDataCenter#155, TritonDataCenter#160, TritonDataCenter#184, TritonDataCenter#187, TritonDataCenter#195.

------------------------------- Added U+25B6 (black right-pointing triangle) and U+25C0 (black left-pointing triangle) (TritonDataCenter#289) Changed look of Markdown headers ## ### #### to make them easier to tell apart (TritonDataCenter#287) Fixed BBEdit incorrectly applying ligatures after tab (TritonDataCenter#274) Returned Nim pragmas {. .} (TritonDataCenter#279) Added Unicode increment U+2206 (TritonDataCenter#174, TritonDataCenter#298) Added fish operators >-> <-< (TritonDataCenter#297) Added safe navigation operators ?. .? ?: (TritonDataCenter#215) Added <~> (TritonDataCenter#179, used in IntelliJ for collapsed methods) Added F# piping operators ||> |||> <|| <||| (TritonDataCenter#184) Added shebang #! (TritonDataCenter#169, TritonDataCenter#193)

Changes since release 131: v1.7.4.2 - fix : Makefile : release build compatible with PIE and customized compilation directives provided through environment variables (TritonDataCenter#274, reported by Antoine Martin) v1.7.4 - Improved : much better speed in -mx32 mode - cli : fix : Large file support in 32-bits mode on Mac OS-X - fix : compilation on gcc 4.4 (TritonDataCenter#272), reported by Antoine Martin v1.7.3 - Changed : moved to versioning; package, cli and library have same version number - Improved: Small decompression speed boost - Improved: Small compression speed improvement on 64-bits systems - Improved: Small compression ratio and speed improvement on small files - Improved: Significant speed boost on ARMv6 and ARMv7 - Fix : better ratio on 64-bits big-endian targets - Improved cmake build script, by Evan Nemerson - New liblz4-dll project, by Przemyslaw Skibinki - Makefile: Generates object files (*.o) for faster (re)compilation on low power systems - cli : new : --rm and --help commands - cli : new : preserved file attributes, by Przemyslaw Skibinki - cli : fix : crash on some invalid inputs - cli : fix : -t correctly validates lz4-compressed files, by Nick Terrell - cli : fix : detects and reports fread() errors, thanks to Hiroshi Fujishima report TritonDataCenter#243 - cli : bench : new : -r recursive mode - lz4cat : can cat multiple files in a single command line (TritonDataCenter#184) - Added : doc/lz4_manual.html, by Przemyslaw Skibinski - Added : dictionary compression and frame decompression examples, by Nick Terrell - Added : Debianization, by Evgeniy Polyakov

- Simplify nospace handling in global completion (#195) - Specially handle all characters in COMP_WORDBREAKS (#187) - Use setuptools tests-require directive, fixes #186 - Complete files using the specified interpreter (#192) - Fix completion for scripts run via python (#191) - Clarify argument to register-python-argcomplete (#190) - Fix handling of commas and other special chars (#172); handle more special characters (#189) - Fix handling of special characters in tcsh (#188) - Update my_shlex to Python 3.6 version (#184) - Fix additional trailing space in exact matches (#183) - Adjust tests to handle development environments (#180) - Fix tcsh tests on OSX (#177); Update bash on OSX (#176); Check output of test setup command (#179) - Optionally disable duplicated flags (#143) - Add default_completer option to CompletionFinder.call (#167) - Let bash add or suppress trailing space (#159)

V0.92 added a few arguments to calls added by fmazu. Allows it to compile. V0.91 only made the tag point to the proper commit. --REW script now handles that situation (aborted release script) better. V0.90 only fixed the release script. Should now contain fmaxullo's patch. --rew fmazullo (1): Add AS number to json output V0.89 only made the tag point to the proper commit. --REW V0.88 Antonio Querubin (3): Merge remote-tracking branch 'origin/master' into newdns Need to error check getnameinfo(). Merge remote-tracking branch 'origin/master' into newdns David Hill (1): include <sys/select.h> for fd_set Jakub Wilk (1): Fix typos Joe Bruggeman (2): Replace all tabs tabs in net.c with spaces cleanup the if blocks in net.c to improve readability Jürgen Weigert (1): Mention + and - keys in the man page Kacper Michajłow (2): Relax mtr-packet search rules. Add missing errno.h include. Matt Kimball (20): Added mtr-packet subprocess test: Fix mtr-packet tests for Python 3 cmdline: multiple host names dropped all but one host (issue #168) mtr-packet: IPv6 support mtr-packet: UDP probe support mtr-packet: packet customization options (size, fill, mark, tos) mtr-packet: TCP and SCTP probes mtr-packet: MPLS decoding and local UDP port usage mtr-packet: allow local address binding Merge branch mtr-packet into 'master' mtr-packet: drop capabilities + using BSD's linked lists for probes build: moved front-end source into ui subdir build: use AC_CHECK_LIB for ncurses, rather than pkg-tool mtr-packet: Fall back to IPv4 only support if IPv6 sockets fail to open build: if linking with ncurses fails, try curses (for NetBSD) build: Fix Solaris build issues build: fix compiler warnings when for OpenBSD, NetBSD and Solaris mtr-packet: Report probe status on host unreachable (Cygwin) cleanup: Fix #ifdef structure which confuses 'ident' cleanup: reindented C source with GNU indent Narthorn (2): Initialize dns process before opening display Add displaymode 2 back in R.E. Wolff (19): Merge branch 'newdns' of https://github.com/traviscross/mtr into newdns Merge branch 'newdns' fixed double printout of start time, issue 131 Updated NEWS as in v0.87.1 format sent and rcvd fields correctly for big numbers #66 increased default unknownhosts #92 #132 #130 (I give in). Merge branch 'master' of github.com:traviscross/mtr fixed no-gtk build bug introduced with e2d898cc more cleanup Partial reverse of 6bb5b6b3b. re-initialize ipinfo_no and -max. Fixes #161. Merge branch 'master' of github.com:traviscross/mtr fixed dynamic DNS on/off switch. Fixed #160 header alignment issue found&fixed by meingtsla. Fixes #164 Merge branch 'master' of github.com:traviscross/mtr asn fix from meingtsla, fixes #163. Pong! put ifdefs around IPV6 only part. Fixes #184 More whitespace mangling for consistency in net.c The release script bumped the version number Roger Wolff (22): New DNS works for IPV4.... moved towards IPV6 compatibilty... removed the include mess... merged antonios's bufsize fixes Merge branch 'master' of github.com:traviscross/mtr into newdns AQ: Added include for redhat, and fixed salen for BSD removed last debug output from dns.c One more patch to fix a getnameinfo corruption problem. -- AQ Rogier Wolff (5): removed AC check for features newdns doesn't use Fixed pull #133 another way.... fixed #27 and #35 where the fix was tested a long time ago. fixed #141 compile without SCTP if not available fixed typo. Sami Kerola (122): warnings: remove unnecessary file usage: add short and long options and descriptions to usage() warnings: stop variable shadowing dns: remove unnecessary dns_events() function posix: replace bzero() and index() with modern equivelants warnings: stop reassigning a value before the old one has been used warnings: remove code that cannot be reached warnings: fix printf data types cleanup: remove unnecessary null check build-sys; do not use subdirectory object man: use url macro to urls and fix reference manual notations build-sys: default to ,/configure --enable-silent-rules warnings: do not take abs() when data type is unsigned warnings: mark unused function input variables warnings: fix couple unsigned vs signed variable comparisions warnings: multiply timeval seconds only when the value is small warnings: fix some missed unsigned vs signed variable comparisions comment: add value range note to initialization cast: do not downgrade to float when double should be used warnings: remove dead code build-sys: fix make distcheck build-sys: remove old dist Makefile kludge build-sys: use build version script from gnulib build-sys: improve configure.am build-sys: require automake 1.11.6 or newer warnings: fix unused variable when ./configure --without-gtk is used readability: always use EXIT_* definitions from stdlib.h cleanup: remove unnecessary function warnigns: add void to functions that do not take any arguments build-sys: fix --without-ipinfo regressions build-sys: fix ./configure --disable-ipv6 warnings: fix --disable-ipv6 --without-ipinfo compilation warnings build-sys: check pkg-config availability build-sys: use pkg-config to find gtk+-2.0 build-sys: use pkg-config to find ncurses build-sys: get rid of double negative ipinfo autotools settings cleanup: remove NO_SPLIT preprocessor check build-sys: simplify finding resolver library build-sys: remove unused autoconf check values cleanup: remove obsolete herror() function usage: reflect ./configure choices in available command line options cleanup: remove preprocessor missing functions go-arounds usage: be careful when parsing numeric user input usage: use error(3) error-reporting function cleanup: move max port number to be a define in net.h build-sys: use system getopt_long() when it is available build-sys: tell function locality explicitly portability: fix float max check from values.h portability: MacOS does not have error() function portability: fix MacOS libresolv usage data types: set static strings to be read-only cleanup: remove redundant redeclaration data types: move variable declaration from header to .c file data types: check with smatch everything is in resonable scope warnings: fix use of uninitialized warning data types: get rid of all globals that are easy to remove usability: fix --mark documentation docs: make manual page versioning automatic data types: move global data to control structures data types: make control structure smaller data types: move rest of the global variables to control structures crash fix: make --xml not to dump core warnings: correct function pointer prototype argument warnings: do not use zero as NULL warnings: avoid vla when malloc() is more appropriate usability: print usage() if unknown options are used cleanup: use definition for a magic value appearing twice in code cleanup: remove commented out includes in dns.c cleanup: avoid duplicating stdint.h cleanup: use ICMP definitions from linux/icmp.h when possible cleanup: move generic utility functions to a separate file reliability: ensure string copy results to a null determined string reliability: further removal of unsave string operation reliability: always check malloc() return value reliability: always check strdup() return value reliability: check writing to stdout and stderr was successful usability: use ISO-8601 timestamp posix: do not use time(2) input argument usability: add bash-completion file bug fix: long option --gracetime is correct, --graceperiod is not performance: use fewer printw() calls to center text cleanup: merge two trim functions to one crash fix: add ctl structure to gtk Pause_clicked() handler crash fix: never return const string as address crash fix: ctl->iiwidth_len was not initialized correctly cleanup: make unused and const attributes to look the same performance: make get_iiwidth() to be const function cleanup: remove more/bottom labels header separation from mpls cleanup: set variable only if it is used cleanup: correct display_offset variable usage cleanup: remove message duplicate performance: set few variables read-only docs: add Sami Kerola to authors performance: make reset in net.c more effective portability: fix bsd build warnings: ensure printf will not overflow misc: improve random initialization net: fix net_reopen() initialization warnings: fix warnings when everything possible is turned on curses: simplify format_number() curses: use switch case in mtr_curses_keyaction() cleanup: remove dead code style: convert c++ comment style to c style display: avoid unnecessary switch case clauses curses: convert magic numbers to an enum list data types: move variables from a file to a function scope cleanup: move file scope variables to the beginning of file data types: move names list away from global scope cleanup: move definitions and struct declarations to mtr.h cleanup: clarify preprocessor nesting build-sys: use proper check to find if time_t is defined build-sys: enable all system extensions regression: fix --displaymode=2 argument user interface: do not allow out of range --ipinfo arguments cleanup: use single logic to handle conditional options docs: add very basic --sctp documentation to manual page docs: improve mtr-packet(8) manual page build-sys: update .gitignore file smatch: extern keyword is needed only in header smatch: fix couple warnings build-sys: update .gitignore file docs: FSF moved back in 2005 Vlad Glagolev (1): respect theme foreground color aquerubin (5): Correct psize for IPv6. Merge updates from branch 'master' into newdns Merge branch 'master' into newdns Merge branch 'newdns' of https://github.com/aquerubin/mtr into newdns Fix standard deviation calculation.

Update to OpenSSL 1.0.1g to patch for heartbleed

0a1d5c6

rmustacc closed this Apr 8, 2014

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update to OpenSSL 1.0.1g to patch for heartbleed #184

Update to OpenSSL 1.0.1g to patch for heartbleed #184

jacques commented Apr 8, 2014

rmustacc commented Apr 8, 2014

Update to OpenSSL 1.0.1g to patch for heartbleed #184

Update to OpenSSL 1.0.1g to patch for heartbleed #184

Conversation

jacques commented Apr 8, 2014

rmustacc commented Apr 8, 2014