PP-514 Improve PVA printing quality and reliability on Factor 4

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg

@@ -12,20 +12,32 @@ variant = BB 0.4
 weight = -1
 
 [values]
+acceleration_print = 1000.0
 acceleration_support_bottom = 100
-acceleration_support_interface = 1500
+acceleration_support_interface = 1000
 brim_replaces_support = False
 build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 150
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
 max_flow_acceleration = 1
 minimum_support_area = 4
+prime_tower_flow = 90
 prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
 skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
 support_interface_offset = 1
 support_offset = 3
+support_xy_distance = 2
 support_z_distance = 0
+switch_extruder_prime_speed = 10.0
 

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg

@@ -12,21 +12,32 @@ variant = BB 0.4
 weight = 0
 
 [values]
+acceleration_print = 1000.0
 acceleration_support_bottom = 100
-acceleration_support_interface = 1500
+acceleration_support_interface = 1000
 brim_replaces_support = False
 build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 150
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
 max_flow_acceleration = 1
 minimum_support_area = 4
+prime_tower_flow = 90
 prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
 skin_material_flow = =material_flow * 0.93
-speed_print = 50
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
 support_interface_offset = 1
 support_offset = 3
+support_xy_distance = 2
 support_z_distance = 0
+switch_extruder_prime_speed = 10.0
 

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg

@@ -12,21 +12,32 @@ variant = BB 0.4
 weight = -2
 
 [values]
+acceleration_print = 1000.0
 acceleration_support_bottom = 100
-acceleration_support_interface = 1500
+acceleration_support_interface = 1000
 brim_replaces_support = False
 build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 150
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
 max_flow_acceleration = 1
 minimum_support_area = 4
+prime_tower_flow = 90
 prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
 skin_material_flow = =material_flow * 0.93
-speed_print = 50
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
 support_interface_offset = 1
 support_offset = 3
+support_xy_distance = 2
 support_z_distance = 0
+switch_extruder_prime_speed = 10.0
 

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg

@@ -12,21 +12,32 @@ variant = BB 0.4
 weight = -3
 
 [values]
+acceleration_print = 1000.0
 acceleration_support_bottom = 100
-acceleration_support_interface = 1500
+acceleration_support_interface = 1000
 brim_replaces_support = False
 build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 150
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
 max_flow_acceleration = 1
 minimum_support_area = 4
+prime_tower_flow = 90
 prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
 skin_material_flow = =material_flow * 0.93
-speed_print = 40
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
 support_interface_offset = 1
 support_offset = 3
+support_xy_distance = 2
 support_z_distance = 0
+switch_extruder_prime_speed = 10.0
 

resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg

@@ -12,20 +12,32 @@ variant = BB 0.8
 weight = -2
 
 [values]
+acceleration_print = 1000.0
 acceleration_support_bottom = 100
-acceleration_support_interface = 1500
+acceleration_support_interface = 1000
 brim_replaces_support = False
 build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 150
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
 max_flow_acceleration = 1
 minimum_support_area = 4
+prime_tower_flow = 90
 prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
 skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
 support_interface_offset = 1
 support_offset = 3
+support_xy_distance = 2
 support_z_distance = 0
+switch_extruder_prime_speed = 10.0
 

resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg

@@ -12,20 +12,32 @@ variant = BB 0.8
 weight = -3
 
 [values]
+acceleration_print = 1000.0
 acceleration_support_bottom = 100
-acceleration_support_interface = 1500
+acceleration_support_interface = 1000
 brim_replaces_support = False
 build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 150
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
 max_flow_acceleration = 1
 minimum_support_area = 4
+prime_tower_flow = 90
 prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
 skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
 support_interface_offset = 1
 support_offset = 3
+support_xy_distance = 2
 support_z_distance = 0
+switch_extruder_prime_speed = 10.0
 

resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg

@@ -12,20 +12,32 @@ variant = BB 0.8
 weight = -4
 
 [values]
+acceleration_print = 1000.0
 acceleration_support_bottom = 100
-acceleration_support_interface = 1500
+acceleration_support_interface = 1000
 brim_replaces_support = False
 build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 gradual_flow_discretisation_step_size = 0.1
 gradual_flow_enabled = True
-initial_layer_line_width_factor = 150
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
 max_flow_acceleration = 1
 minimum_support_area = 4
+prime_tower_flow = 90
 prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
 skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
 support_interface_offset = 1
 support_offset = 3
+support_xy_distance = 2
 support_z_distance = 0
+switch_extruder_prime_speed = 10.0