Merge pull request #15995 from Ultimaker/CURA-10752_New_Changelog_for…

…_5.4

Update Changelog for Cura 5.4 Stable

resources/texts/change_log.txt

@@ -13,9 +13,9 @@ Try it for yourself <a href="https://www.thingiverse.com/thing:6069926?utm_sourc
 - Fixed a bug where the Support Interface was not correctly generated with Tree Support
 
 * Changed the order in which the brim is printed so it's easier to remove
-Introduced the Smart Brim setting that changes the order in which the brim lines are printed making them easier to remove. 
+Introduced the Smart Brim setting that changes the order in which the brim lines are printed making them easier to remove. Try it for yourself <a href="https://www.thingiverse.com/thing:6080908?utm_source=changelog&utm_medium=cura&utm_campaign=54_beta">with this Cura Cookie Cutter</a>.
 
-* Other new features and improvements:
+* New features and improvements:
 - Updated the UltiMaker logo to reflect the new company logo
 - Added support for the updated mainboard revisions of UltiMaker S3, S5, and S7
 - Introduced Hole Horizontal Expansion Max Diameter so only the expansion of smaller holes can be tuned while leaving larger holes untouched.
@@ -27,8 +27,7 @@ Introduced the Smart Brim setting that changes the order in which the brim lines
 - Removed the settings related to Wire Printing since it was broken and barely used.
 - Upgraded PyQt to version 6.4.2 which improves responsiveness in the UI
 
-* Other Bug Fixes
-- Fixed a bug where undesirable micro segments would introduce jagged paths on curved surfaces.
+* Bug Fixes
 - Fixed a bug where the brim line would not be printed in the same orientation
 - Fixed a bug where models dropped to the buildplate when they were supposed to be floating
 - Fixed a bug where models would overlap if multiple models were loaded at the same time
@@ -42,8 +41,19 @@ Introduced the Smart Brim setting that changes the order in which the brim lines
 - Fixed AppImage Icon for Linux systems, contributed by @leoheck
 - Fixed a bug where the buildplate temperature in the USB printing monitor was not rounded, contributed by @asteroids1975
 - Fixed a bug where retracting for Filament Change was not performed correctly because of an extra /n in the gcode. Contributed by @JuanManuelCuello
-
-* Printer definitions, profiles and materials:
+- Fixed a bug where the material estimation would not show currencies correctly. Contributed by @Diegovd
+
+* Bugs resolved since the Beta Release
+- Fixed a bug where undesirable micro-segments would introduce jagged paths on curved surfaces.
+- Fixed a bug where it was not possible to use custom support and brim meshes 
+- Fixed a bug Cura would not start when upgrading from a Cura 5.4 Nightly
+- Fixed a bug where Connect Top/Bottom Polygons would cause a slicing crash
+- Fixed a bug where generic materials were missing for some printers
+- Fixed a bug where Support Horizontal Expansion would be incorrectly applied to tree supports
+- Fixed a bug where nozzles were missing from the Elegoo Neptune 3 Plus. Contributed by @GregValiant
+
+* Printer definitions, profiles, and materials:
+- Introduced UltiMaker PET CF with Annealing and Engineering intents
 - Updated Infill- and Skin Overlap settings for UltiMaker printers
 - Enabled a modest Support Brim by default for UltiMaker printers
 - Updated Support Interface speeds for PVA for UltiMaker printers
@@ -60,6 +70,17 @@ Introduced the Smart Brim setting that changes the order in which the brim lines
 - Updated Creality 3 S1, Creality 3 S1 Plus, and Creality 3 S1 Pro, contributed by @sparkym3
 - Updated Cremaker profile to remove material temperature boost, contributed by @hyu7000
 
+* Community translations:
+- Updated Brazilian translations, contributed by @Patola
+
+* Known critical issues:
+- Support Brim is missing if the Buildplate Adhesion is set to None. <a href="https://github.com/Ultimaker/Cura/issues/14983">We are tracking reports here</a>. 
+- Hide seam is actually not hidden and can give random results, for now changing the Seam Corner Preference to None will give better results. <a href="https://github.com/Ultimaker/Cura/issues/15290">We are tracking reports here</a>.  
+- Combing Not In Skin can result in unexpected stringing. <a href="https://github.com/Ultimaker/Cura/issues/14511">We are tracking reports here</a>. 
+- Multiple external monitors on Windows (especially if from the same brand) <a href="https://support.ultimaker.com/hc/en-us/articles/6103674944156">might be a problem under some circumstances</a>. 
+- Does Cura (not) work on your OS (version)? See <a href="https://support.ultimaker.com/hc/en-us/articles/360011889579">this article</a> for clarification.
+
+
 
 [5.3.1]