Method printers: Adding new materials (Tough PLA, PETG, NylonCF, ABS)…

… and updated profiles for 5.9

PP-511

resources/definitions/ultimaker_method.def.json

@@ -23,19 +23,7 @@
             "fabtotum_",
             "fdplast_",
             "filo3d_",
-            "generic_asa_175",
-            "generic_abs_175",
-            "generic_bvoh_175",
-            "generic_petg_175",
-            "generic_pla_175",
-            "generic_tough_pla_175",
-            "generic_pva_175",
-            "generic_cffpa_175",
-            "generic_cpe_175",
-            "generic_nylon_175",
-            "generic_hips_175",
-            "generic_pc_175",
-            "generic_tpu_175",
+            "generic_",
             "goofoo_",
             "ideagen3D_",
             "imade3d_",
@@ -53,23 +41,22 @@
             "ultimaker_absr_175",
             "ultimaker_abscf_175",
             "ultimaker_bvoh_175",
-            "ultimaker_petg_175",
             "ultimaker_cffpa_175",
             "ultimaker_cpe_175",
-            "ultimaker_nylon_175",
             "ultimaker_hips_175",
             "ultimaker_pc_175",
             "ultimaker_tpu_175",
-            "ultimaker_tough_pla_175",
             "ultimaker_rapidrinse_175",
             "ultimaker_sr30",
+            "ultimaker_metallic_pla_175",
             "verbatim_",
             "Vertex_",
             "volumic_",
             "xyzprinting_",
             "zyyx_pro_",
             "octofiber_",
-            "fiberlogy_"
+            "fiberlogy_",
+            "ultimaker_metallic_pla_175"
         ],
         "has_machine_materials": true,
         "has_machine_quality": true,
@@ -98,7 +85,6 @@
     "overrides":
     {
         "build_volume_temperature": { "maximum_value": "67" },
-        "machine_depth": { "default_value": 236.48 },
         "machine_disallowed_areas":
         {
             "default_value": [
@@ -128,9 +114,7 @@
                 ]
             ]
         },
-        "machine_height": { "default_value": 196 },
         "machine_name": { "default_value": "UltiMaker Method" },
-        "machine_width": { "default_value": 283.3 },
         "prime_tower_position_x": { "value": "(150 / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (150 - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (150 / 2 if resolveOrValue('machine_center_is_zero') else 0)" },
         "prime_tower_position_y": { "value": "190 - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (190 / 2 if resolveOrValue('machine_center_is_zero') else 0)" }
     }