Skip to content

ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT
Notifications You must be signed in to change notification settings

adamgreig/ecpdap

Repository files navigation

ECPDAP

crates.io docs.rs CI

ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.

This crate uses jtagdap to handle CMSIS-DAP and JTAG, and spi-flash-rs to handle the SPI flash itself. For programming SPI flashes directly, for example when using iCE40 FPGAs, check out spidap, which uses the same libraries.

IDCODEs and SPI modes

ECP5 bitstreams can specify an IDCODE which the FPGA checks against its internal IDCODE. By default this would prevent loading (for example) an LFE5U-45F bitstream onto an LFE5UM-45F, even though it would be compatible. By default, ecpdap will patch the bitstream IDCODE when programming either SRAM or SPI flash to match the IDCODE detected via JTAG. Use --no-fix-idcode to disable this functionality. Alternatively, use --remove-idcode to entirely remove the IDCODE check from the bitstream.

Bitstreams can also include an SPI mode command to enable faster bitstream loading from SPI flash. However, if a bitstream with such a command is loaded directly to SRAM, and the SPI flash does not have a valid bitstream loaded, the ECP5 aborts loading the bitstream. To work around this issue, ecpdap will by default remove SPI mode commands from bitstreams loaded to SRAM. Use --no-remove-spimode to disable this functionality.

JTAG Clock Frequency

The default clock frequency is 1MHz, but in many situations higher frequencies are possible and reduce operation time. It is also possible to require lower speeds in situations with poor signal integrity.

Use -f or --freq to change, for example -f 10M.

JTAG Scan Chains

ECP5 FPGAs can be programmed on arbitrary length JTAG scan chains; you may need to specify --ir-lengths and possibly specify a higher --scan-chain-length depending on the other devices on your scan chain.

However, accessing the attached SPI flashes require that the ECP5 is the only device on the scan chain (in other words, the probe TDI and TDO connect directly to the ECP5 pins).

Pre-built Binaries

Pre-built binaries are available for Windows and Linux on the Releases page. You must have libusb installed or available on your system, and you must have permissions or drivers set up to access your CMSIS-DAP probe. See the drivers page for information on setup.

ECPDAP is also packaged for NixOS under the ecpdap attribute.

Building

  • You must have a working Rust compiler installed. Visit rustup.rs to install Rust.
  • libusb is required to use the higher-speed CMSIS-DAPv2 protocol, where supported by your probe.
  • You may need to set up drivers or permissions to access the USB device, see drivers/ for details

To build and install for your user, without checking out the repository:

cargo install ecpdap

Or, building locally after checking out this repository:

cargo build --release

You can either run the ecpdap executable directly from target/release/ecpdap, or you can install it for your user using cargo install --path ..

Usage

Run ecpdap help for detailed usage. Commonly used commands:

  • ecpdap probes: List all detected CMSIS-DAP probes
  • ecpdap scan: Scan the JTAG chain to detect ECP5 devices
  • ecpdap program bitstream.bit -f10M: Program bitstream.bit to the ECP5 at 10MHz
  • ecpdap flash id: Read the flash manufacturer and product IDs
  • ecpdap flash scan: Read the flash SFDP metadata and status registers
  • ecpdap flash write bitstream.bit: Write bitstream.bit to flash memory.

Licence

ecpdap is licensed under either of

at your option.

About

ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.

Resources

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT

Stars

Watchers

Forks

Contributors 4

  •  
  •  
  •  
  •  

Languages