- git clone the repository
- move to tools folder
- run install_linaro.sh
Note: For Windows user, please install MSYS2 Shell and git for windows manually.(http://www.msys2.org) To install required package in MSYS2 shell, run $pacman -S --needed make gcc git Please install doxygen/1.8.2 before generating the documentation. (https://www.doxygen.nl/download.html)
- The software examples is located at examples and arranged according to it's family of the FPGA, CVAV, A10, S10
- To build the example simple run make all then the linaro compiler will help to build and link the software example
- There are several switches that user can specify in the makefile
| SEMIHOSTED | MEMORY | Pre-requisite to load Uboot SPL | Expected output |
|---|---|---|---|
| 0 | ocr | Yes, to setup UART | Print at UART |
| 0 | ddr | Yes, to calibrate RAM | Print at UART |
| 1 | ocr | No, no UART nor RAM needed | Print at ARMDS app Console |
| 1 | ddr | Yes, to calibrarte RAM | Print at ARMDS app Console |
- Example of the make command
- $ make SEMIHOSTED=1 MEMORY=ocr
You can get more information in the README file inside each of the example.
- Refer to Rocket Board webpage on how to use and Debug the Baremetal Software using ARM DS IDE
- https://rocketboards.org/foswiki/Documentation/HWLib
- There are examples for the baremetal application inside the examples folder. Each of the example has it's own readme file.
Run setup.sh will help to install linaro and also generate doxygen documentation on the HWLibs API, if you already run install_linaro.sh previously, to generate doxygen documentation, just run generate_doxygen.sh (This might take up to more than 1 hour)
By running setup.sh
- This will help to
- Install linaro, newlib, cygwin (install_linaro.sh)
- generate doxygen documentation (generate_doxygen.sh)
| No | Features | Cyclone V / Arria V | Arria10 | Stratix 10 |
|---|---|---|---|---|
| 1 | CAN | Cyclone V Only | - | - |
| 2 | Cache | YES | YES | YES |
| 3 | CCU | - | - | - |
| 4 | Clock Manager | YES | YES | YES |
| 5 | DMA-330 | YES | YES | YES |
| 6 | Ethernet | - | YES | YES |
| 7 | FPGA bridges (LWH2F, H2F) | YES | YES | - |
| 8 | FPGA Bridges (F2S) | YES | YES | - |
| 9 | FPGA Config | YES | YES | - |
| 10 | GPIO | YES | YES | YES |
| 11 | HPS Cold Reset | YES | YES | - |
| 12 | HPS Warm Reset(SW) | - | YES | - |
| 13 | I2C | YES | YES | YES |
| 14 | Mailbox | - | - | - |
| 15 | NAND | YES | YES | - |
| 16 | OCRAM ECC | YES | YES | - |
| 17 | PR | - | - | - |
| 18 | QSPI | YES | YES | - |
| 19 | Reset Manager | YES | YES | YES |
| 20 | RSU | - | - | - |
| 21 | SDMMC | YES | YES | YES |
| 22 | SDRAM | YES | YES | YES |
| 23 | SDRAM ECC | YES | YES | - |
| 24 | SMMU | - | - | - |
| 25 | SPI | YES | YES | YES |
| 26 | DW Timer | YES | YES | YES |
| 27 | UART | YES | YES | YES |
| 28 | USB | - | - | - |
| 29 | Watchdog | YES | YES | YES |