A Docker Container for Samplicator https://github.com/sleinen/samplicator
Samplicator can be used to forward UDP packets to multiple destinations.
The usage convention for samplicator is...
sudo docker run -it --network host robcowart/samplicator:1.0.1_1.3.8rc1 [<option>...] [<destination>...]The allowed <option>s are...
| Option | Description |
|---|---|
-d <level> |
to set the debugging level |
-s <address> |
to set interface address on which to listen for incoming packets (default any) |
-p <port> |
to set the UDP port on which to listen for incoming packets (default 2000) |
-b <buflen> |
size of receive buffer (default 65536) |
-c <configfile> |
specify a config file to read |
-x <delay> |
to specify a transmission delay after each packet, in units of microseconds |
-S |
maintain (spoof) source addresses |
-n |
don't compute UDP checksum (only relevant with -S) |
-f |
fork program into background |
-m <pidfile> |
write the process ID to a file |
-4 |
IPv4 only |
-6 |
IPv6 only |
-h |
to print a usage message and exit |
-u <pdulen> |
size of max pdu on listened socket (default 65536) |
Each <destination> should be specified as <addr>[/<port>[/<interval>[,ttl]]], where...
| Parameter | Description |
|---|---|
<addr> |
IP address of the receiver |
<port> |
port UDP number of the receiver (default 2000) |
<freq> |
number of received datagrams between successive copied datagrams for this receiver. |
<ttl> |
The TTL (IPv4) or hop-limit (IPv6) for outgoing datagrams. |
Config file format:
a.b.c.d[/e.f.g.h]: receiver ...
where:
a.b.c.d is the sender's IP address
e.f.g.h is a mask to apply to the sender (default 255.255.255.255)
receiver see above.
Receivers specified on the command line will get all packets, those specified in the config-file will get only packets with a matching source.
The included docker-compose.yml file provides examples of using samplicator to forward Netflow, IPFIX, sFlow, Syslog and SNMP Traps.
The code to build and run samplicator as a container is released under Apache License Version 2.0, January 2004.
Samplicator itself is released under GNU General Public License v2.0.