DigistumpArduino for Vidyut Netbook

To manually install

• Download this Repo
• unpack & cd to master folder
• ./arduino

To compile

To compile tools from scratch use:

• Arduino 1.5.X (1.5.8+).
• Digistump.
• Micronucleus.
• AVR-Dummy.
• Astyle.
• Avr-toolchain.

Compiling Arduino 1.5.x

• Unzip the source and cd to Arduino-master/build

• Make the following changes to build.xml file

  ::

  1. Remove the "check os" dependency in linux32 target
  2. Remove the "build" dependency in linux-dist target.

• Run the following command for compiling the Arduino

  ant -buildfile build.xml -Dplatform=linux32
  

Compiling Astyle

• cd to astyle source folder
• ./bash-setup
• cd astyle-code/Astyle/build/gcc
• make clean
• make java
• rename the libastyle-2.x.x.so in astyle-code/Astyle/build/gcc/bin to libastylej.so
• copy it to Arduino-master/build/linux/work/lib/

Compiling Micronucleus and Avr-dummy

• Compile the micronucleus commandline tool (commandline directory) and avr-dummy ("make all" for both) - which will produce executables named micronucleus and avrdude
• Copy the digistump folder from this Digistump repo to Arduino-master/build/linux/work/hardware.
• Copy micronucleus and avrdude executables to the Arduino-master/build/linux/work/hardware/digistump/avr/tools.

Compiling Avr-tool chain

• git clone git://github.com/arduino/toolchain-avr
• sudo apt-get install build-essential gperf bison subversion texinfo zip automake flex libusb-dev libusb-1.0-0-dev libtinfo-dev pkg-config
• cd toolchain-avr
• ./build.all.bash
• output gives avr and avrdude-x.x.x directories
• before copying toolchain compiled for arm,need to remove the tool chain already downloded for for x86 by build.xml in Arduino-master/build/linux/work/hardware/tools/avr/ except the builtin_tools_versions.txt
• copy the toolchain-avr/avr/* to Arduino-master/build/linux/work/hardware/tools/avr/
• copy the avrdude-x.x.x/bin/* to Arduino-master/build/linux/work/hardware/tools/avr/bin/
• copy the avrdude-x.x.x/lib/* to Arduino-master/build/linux/work/hardware/tools/avr/lib/
• copy the avrdude-x.x.x/include/* to Arduino-master/build/linux/work/hardware/tools/avr/include/
• copy the avrdude-x.x.x/etc to Arduino-master/build/linux/work/hardware/tools/avr/

Now your DigistumpArduino is ready at Arduino-master/build/linux/work.Only work directery is needed.

Authors:	Padmakar Reddy Thatikonda
version:	1.5.8 of 2015/04/20