DOCS: Add EDB configuration example.

examples/edb_cfg_examples/setup_edb_for_signal_integrity_analysis.py

@@ -0,0 +1,186 @@
+# # Setup EDB for Power Integrity Analysis
+# This example shows how to set up the electronics database (EDB) for power integrity analysis from a single
+# configuration file.
+
+# ## Preparation
+# Import the required packages
+
+import json
+
+# +
+import os
+import tempfile
+import time
+
+from pyaedt import Hfss3dLayout
+from pyaedt.downloads import download_file
+
+from pyedb import Edb
+
+AEDT_VERSION = "2024.1"
+NG_MODE = False
+
+# -
+
+# Download the example PCB data.
+
+temp_folder = tempfile.TemporaryDirectory(suffix=".ansys")
+aedb = download_file(source="edb/ANSYS-HSD_V1.aedb", destination=temp_folder.name)
+download_file(source="touchstone", name="GRM32_DC0V_25degC_series.s2p", destination=temp_folder.name)
+
+# ## Create a configuration file
+# In this example, we are going to use a configuration file to set up the layout for analysis.
+# ### Initialize a dictionary
+# Create an empty dictionary to host all configurations.
+
+cfg = dict()
+
+# ### Assign S-parameter model to capactitors.
+
+# Set S-parameter library path.
+
+cfg["general"] = {"s_parameter_library": os.path.join(temp_folder.name, "touchstone")}
+
+# Assign the S-parameter model. Keywords
+# - **name**. Name of the S-parameter model in AEDT.
+# - **component**_definition. Known as component part number of part name.
+# - **file_path**. Touchstone file or full path to the touchstone file.
+# - **apply_to_all**. When set to True, assign the S-parameter model to all components share the same
+# component_definition. When set to False, Only components in "components" are assigned.
+# - **components**. when apply_to_all=False, components in the list are assigned an S-parameter model.
+# When apply_to_all=False, components in the list are NOT assigned.
+# - **reference_net**. Reference net of the S-parameter model.
+
+cfg["s_parameters"] = [
+    {
+        "name": "GRM32_DC0V_25degC_series",
+        "component_definition": "CAPC0603X33X15LL03T05",
+        "file_path": "GRM32_DC0V_25degC_series.s2p",
+        "apply_to_all": False,
+        "components": ["C110", "C206"],
+        "reference_net": "GND",
+    }
+]
+
+# ### Define ports
+# Create a circuit port between power and ground nets. Keywords
+# - **name**. Name of the port.
+# - **reference_desinator**.
+# - **type**. Type of the port. Supported types are 'ciruict', 'coax'.
+# - **positive_terminal**. Positive terminal of the port. Supported types are 'net', 'pin', 'pin_group', 'coordinates'.
+# - **negative_terminal**. Positive terminal of the port. Supported types are 'net', 'pin', 'pin_group', 'coordinates'.
+
+cfg["ports"] = [
+    {
+        "name": "port1",
+        "reference_designator": "U1",
+        "type": "circuit",
+        "positive_terminal": {"net": "1V0"},
+        "negative_terminal": {"net": "GND"},
+    }
+]
+
+# ### Define SIwave SYZ analysis setup
+# Keywords
+# - **name**. Name of the setup.
+# - **type**. Type of the analysis setup. Supported types are 'siwave_ac', 'siwave_dc', 'hfss'.
+# - **pi_slider_position**. PI slider position. Supported values are from '0', '1', '2'. 0:speed, 1:balanced,
+# 2:accuracy.
+# - **freq_sweep**. List of frequency sweeps.
+#   - **name**. Name of the sweep.
+#   - **type**. Type of the sweep. Supported types are 'interpolation', 'discrete', 'broadband'.
+#   - **frequencies**. Frequency distribution.
+#     - **distribution**. Supported distributions are 'linear_count', 'linear_scale', 'log_scale'.
+#     - **start**. Start frequency. Example, 1e6, "1MHz".
+#     - **stop**. Stop frequency. Example, 1e9, "1GHz".
+#     - **increment**.
+
+cfg["setups"] = [
+    {
+        "name": "siwave_syz",
+        "type": "siwave_ac",
+        "pi_slider_position": 1,
+        "freq_sweep": [
+            {
+                "name": "Sweep1",
+                "type": "interpolation",
+                "frequencies": [{"distribution": "log_scale", "start": 1e6, "stop": 1e9, "increment": 20}],
+            }
+        ],
+    }
+]
+
+# ### Define Cutout
+# Keywords
+# - **signal_list**. List of nets to be kept after cutout.
+# - **reference_list**. List of nets as reference planes.
+# - **extent_type**. Supported extend types are 'Conforming', 'ConvexHull', 'Bounding'.
+# For optional input arguments, refer to method pyedb.Edb.cutout()
+
+cfg["operations"] = {
+    "cutout": {
+        "signal_list": ["1V0"],
+        "reference_list": ["GND"],
+        "extent_type": "ConvexHull",
+    }
+}
+
+# ## Save the configuration as a JSON file
+# The configuration file can be saved in JSON format and applied to layout data using the EDB.
+
+file_json = os.path.join(temp_folder.name, "edb_configuration.json")
+with open(file_json, "w") as f:
+    json.dump(cfg, f, indent=4, ensure_ascii=False)
+
+# ## Load configuration into EDB
+
+# Load layout.
+
+edbapp = Edb(aedb, edbversion=AEDT_VERSION)
+
+# Load configuration file
+
+edbapp.configuration.load(config_file=file_json)
+
+# Apply configuration to EDB.
+
+edbapp.configuration.run()
+
+# Save and close EDB.
+
+edbapp.save()
+edbapp.close()
+
+# The configured EDB file is saved in a temp folder.
+
+print(temp_folder.name)
+
+# ## Analyze in HFSS 3D Layout
+
+# ### Load edb into HFSS 3D Layout.
+
+h3d = Hfss3dLayout(aedb, version=AEDT_VERSION, non_graphical=NG_MODE, new_desktop=True)
+
+# ### Analyze
+
+h3d.analyze()
+
+# ### Plot impedance
+
+solutions = h3d.post.get_solution_data(expressions="Z(port1,port1)")
+solutions.plot()
+
+# ## Shut Down Electronics Desktop
+
+h3d.close_desktop()
+
+# All project files are saved in the folder ``temp_file.dir``. If you've run this example as a Jupyter notbook you
+# can retrieve those project files. The following cell removes all temporary files, including the project folder.
+
+# ## Cleanup
+#
+# All project files are saved in the folder ``temp_file.dir``. If you've run this example as a Jupyter notbook you
+# can retrieve those project files. The following cell removes all temporary files, including the project folder.
+
+time.sleep(3)
+temp_folder.cleanup()