Precommit fix

.pre-commit-config.yaml

@@ -7,7 +7,7 @@ repos:
   hooks:
   - id: black
     args:
-      - --line-length=88
+      - --line-length=120
 
 - repo: https://github.com/adamchainz/blacken-docs
   rev: 1.16.0
@@ -25,7 +25,7 @@ repos:
   hooks:
   - id: flake8
     args: [
-      --max-line-length, "88",
+      --max-line-length, "120",
       ansys, codegen, doc, examples, tests
     ]
 

doc/source/Scripts_resources/SI/add_simulation_setup.py

@@ -4,9 +4,9 @@
 # Ansys release version
 desktop_version = "2023.2"
 
-#download and copy the layout file from examples
+# download and copy the layout file from examples
 temp_folder = pyaedt.generate_unique_folder_name()
-targetfile = pyaedt.downloads.download_file('edb/ANSYS-HSD_V1.aedb', destination=temp_folder)
+targetfile = pyaedt.downloads.download_file("edb/ANSYS-HSD_V1.aedb", destination=temp_folder)
 
 # loading EDB
 edbapp = Edb(edbpath=targetfile, edbversion=desktop_version)
@@ -16,24 +16,30 @@
 simple_hfss_setup.add_frequency_sweep(name="MySweep", frequency_sweep=[["linear scale", "0GHz", "10GHz", "0.01GHz"]])
 
 multi_freq_setup = edbapp.create_hfss_setup("MyMultiFreqSetup")
-multi_freq_setup.set_solution_multi_frequencies(frequencies=["5GHz", "7GHz", "10GHz"], max_num_passes=30, max_delta_s=0.02)
+multi_freq_setup.set_solution_multi_frequencies(
+    frequencies=["5GHz", "7GHz", "10GHz"], max_num_passes=30, max_delta_s=0.02
+)
 multi_freq_setup.add_frequency_sweep(name="MySweep", frequency_sweep=[["linear scale", "0GHz", "20GHz", "0.01GHz"]])
 
 broad_band_sweep = edbapp.create_hfss_setup("MyBroadbandSetup")
-broad_band_sweep.set_solution_broadband(low_frequency="5GHz", high_frequency="10GHz", max_num_passes=20, max_delta_s=0.01)
+broad_band_sweep.set_solution_broadband(
+    low_frequency="5GHz", high_frequency="10GHz", max_num_passes=20, max_delta_s=0.01
+)
 broad_band_sweep.add_frequency_sweep(name="MySweep", frequency_sweep=[["linear scale", "0GHz", "20GHz", "0.01GHz"]])
 
 # adding frequency sweeps
 multi_freq_sweep_setup = edbapp.create_hfss_setup("MyMultiFrequencySweepSetup")
 multi_freq_sweep_setup.set_solution_single_frequency(frequency="5GHz", max_num_passes=30, max_delta_s=0.02)
-multi_freq_sweep_setup.add_frequency_sweep(frequency_sweep=[["linear count", "0", "1kHz", 1],
-                                                ["log scale", "1kHz", "0.1GHz", 10],
-                                                ["linear scale", "0.1GHz", "10GHz", "0.1GHz"],
-                                                ])
+multi_freq_sweep_setup.add_frequency_sweep(
+    frequency_sweep=[
+        ["linear count", "0", "1kHz", 1],
+        ["log scale", "1kHz", "0.1GHz", 10],
+        ["linear scale", "0.1GHz", "10GHz", "0.1GHz"],
+    ]
+)
 
 # save and close project
 edbapp.save_edb()
 edbapp.close_edb()
 hfss = Hfss3dLayout(projectname=targetfile, specified_version=desktop_version)
 hfss.release_desktop(close_desktop=False, close_projects=False)
-

doc/source/Scripts_resources/SI/advanced_circuit_port_creation.py

@@ -1,16 +1,16 @@
-import pyaedt
-from pyaedt import Edb, Hfss3dLayout
-from pyaedt.generic.constants import SourceType
+from pyedb.generic.general_methods import generate_unique_folder_name
+from pyedb.legacy.edb import EdbLegacy
+from pyedb.misc.downloads import download_file
 
 # Ansys release version
 desktop_version = "2023.2"
 
 # download and copy the layout file from examples
-temp_folder = pyaedt.generate_unique_folder_name()
-targetfile = pyaedt.downloads.download_file('edb/ANSYS-HSD_V1.aedb', destination=temp_folder)
+temp_folder = generate_unique_folder_name()
+targetfile = download_file("edb/ANSYS-HSD_V1.aedb", destination=temp_folder)
 
 # loading EDB
-edbapp = Edb(edbpath=targetfile, edbversion=desktop_version)
+edbapp = EdbLegacy(edbpath=targetfile, edbversion=desktop_version)
 
 signal_nets = ["DDR4_DQ0", "DDR4_DQ1", "DDR4_DQ2", "DDR4_DQ3", "DDR4_DQ4", "DDR4_DQ5", "DDR4_DQ6", "DDR4_DQ7"]
 reference_nets = ["GND"]
@@ -29,5 +29,3 @@
 # save and close project
 edbapp.save_edb()
 edbapp.close_edb()
-hfss = Hfss3dLayout(projectname=targetfile, specified_version=desktop_version)
-hfss.release_desktop(close_desktop=False, close_projects=False)

doc/source/Scripts_resources/SI/clipping_design.py

@@ -4,9 +4,9 @@
 # Ansys release version
 desktop_version = "2023.2"
 
-#download and copy the layout file from examples
+# download and copy the layout file from examples
 temp_folder = pyaedt.generate_unique_folder_name()
-targetfile = pyaedt.downloads.download_file('edb/ANSYS-HSD_V1.aedb', destination=temp_folder)
+targetfile = pyaedt.downloads.download_file("edb/ANSYS-HSD_V1.aedb", destination=temp_folder)
 
 # loading EDB
 edbapp = Edb(edbpath=targetfile, edbversion=desktop_version)
@@ -15,7 +15,8 @@
 signal_nets = ["DDR4_DQ0", "DDR4_DQ1", "DDR4_DQ2", "DDR4_DQ3", "DDR4_DQ4", "DDR4_DQ5", "DDR4_DQ6", "DDR4_DQ7"]
 # at least one reference net must be inclulded. Reference nets are included in the design but clipped.
 reference_nets = ["GND"]
-# defining the expansion factor. The value gives the distance for evaluating the cutout extent. Here we define a cutout
+# defining the expansion factor.
+# The value gives the distance for evaluating the cutout extent
 expansion = 0.01  # 1cm in this case
 # processing cutout
 edbapp.cutout(signal_list=signal_nets, reference_list=reference_nets, expansion_size=expansion)
@@ -26,4 +27,4 @@
 hfss = Hfss3dLayout(projectname=targetfile, specified_version=desktop_version)
 # After opening AEDT with PyAEDT, if you want to be able to close manually the project you have to release
 # AEDT from PyAEDT.
-hfss.release_desktop(close_desktop=False, close_projects=False)
+hfss.release_desktop(close_desktop=False, close_projects=False)

doc/source/Scripts_resources/SI/editing_layer_stackup.py

@@ -1,17 +1,18 @@
-import pyaedt
-from pyaedt import Edb, Hfss3dLayout
+from pyedb.generic.general_methods import generate_unique_folder_name
+from pyedb.legacy.edb import EdbLegacy
+from pyedb.misc.downloads import download_file
 
 # Ansys release version
 desktop_version = "2023.2"
 
-#download and copy the layout file from examples
-temp_folder = pyaedt.generate_unique_folder_name()
-targetfile = pyaedt.downloads.download_file('edb/ANSYS-HSD_V1.aedb', destination=temp_folder)
+# download and copy the layout file from examples
+temp_folder = generate_unique_folder_name()
+targetfile = download_file("edb/ANSYS-HSD_V1.aedb", destination=temp_folder)
 
 # loading EDB
-edbapp = Edb(edbpath=targetfile, edbversion=desktop_version)
+edbapp = EdbLegacy(edbpath=targetfile, edbversion=desktop_version)
 
-# ploting layer stackup in matplotlib
+# plotting layer stackup in matplotlib
 edbapp.stackup.plot()
 
 # retrieving signal layers name
@@ -36,5 +37,3 @@
     layer.material = "MyMetal"
 edbapp.materials.add_material(name="SolderMask", permittivity=3.8, dielectric_loss_tangent=1e-3)
 edbapp.stackup.add_layer(layer_name="Solder_mask", base_layer="1_Top", thickness="200um", material="SolderMask")
-
-

doc/source/Scripts_resources/SI/layout_import.py

@@ -1,15 +1,16 @@
-import pyaedt
-from pyaedt import Edb, Hfss3dLayout
+from pyedb.generic.general_methods import generate_unique_folder_name
+from pyedb.legacy.edb import EdbLegacy
+from pyedb.misc.downloads import download_file
 
 # Ansys release version
 desktop_version = "2023.2"
 
-#download and copy the layout file from examples
-temp_folder = pyaedt.generate_unique_folder_name()
-targetfile = pyaedt.downloads.download_file('edb/ANSYS-HSD_V1.aedb', destination=temp_folder)
+# download and copy the layout file from examples
+temp_folder = generate_unique_folder_name()
+targetfile = download_file("edb/ANSYS-HSD_V1.aedb", destination=temp_folder)
 
 # loading EDB
-edbapp = Edb(edbpath=targetfile, edbversion=desktop_version)
+edbapp = EdbLegacy(edbpath=targetfile, edbversion=desktop_version)
 
 # Some layout statistics
 stats = edbapp.get_statistics()
@@ -36,4 +37,4 @@
 edbapp.nets.plot(None)
 
 # plotting specific net
-edbapp.nets.plot("GND")
+edbapp.nets.plot("GND")

doc/source/conf.py

@@ -2,42 +2,45 @@
 
 # -- Project information -----------------------------------------------------
 import datetime
+from importlib import import_module
+import json
 import os
 import pathlib
+from pprint import pformat
 import sys
 import warnings
 
-import pyvista
-import numpy as np
-import json
-from sphinx_gallery.sorting import FileNameSortKey
-from ansys_sphinx_theme import (ansys_favicon,
-                                get_version_match, pyansys_logo_black,
-                                watermark,
-                                ansys_logo_white,
-                                ansys_logo_white_cropped, latex)
-from importlib import import_module
-from pprint import pformat
-from docutils.parsers.rst import Directive
+from ansys_sphinx_theme import (
+    ansys_favicon,
+    ansys_logo_white,
+    ansys_logo_white_cropped,
+    get_version_match,
+    latex,
+    pyansys_logo_black,
+    watermark,
+)
 from docutils import nodes
+from docutils.parsers.rst import Directive
+import numpy as np
+import pyvista
 from sphinx import addnodes
 
 # <-----------------Override the sphinx pdf builder---------------->
 # Some pages do not render properly as per the expected Sphinx LaTeX PDF signature.
 # This issue can be resolved by migrating to the autoapi format.
-# Additionally, when documenting images in formats other than the supported ones, 
+# Additionally, when documenting images in formats other than the supported ones,
 # make sure to specify their types.
 from sphinx.builders.latex import LaTeXBuilder
+from sphinx_gallery.sorting import FileNameSortKey
 
 LaTeXBuilder.supported_image_types = ["image/png", "image/pdf", "image/svg+xml", "image/webp"]
 
-from sphinx.writers.latex import CR
-from sphinx.writers.latex import LaTeXTranslator
 from docutils.nodes import Element
+from sphinx.writers.latex import CR, LaTeXTranslator
 
 
 def visit_desc_content(self, node: Element) -> None:
-    self.body.append(CR + r'\pysigstopsignatures')
+    self.body.append(CR + r"\pysigstopsignatures")
     self.in_desc_signature = False
 
 
@@ -46,23 +49,22 @@ def visit_desc_content(self, node: Element) -> None:
 
 # <----------------- End of sphinx pdf builder override---------------->
 
+
 class PrettyPrintDirective(Directive):
     """Renders a constant using ``pprint.pformat`` and inserts into the document."""
+
     required_arguments = 1
 
     def run(self):
-        module_path, member_name = self.arguments[0].rsplit('.', 1)
+        module_path, member_name = self.arguments[0].rsplit(".", 1)
 
         member_data = getattr(import_module(module_path), member_name)
         code = pformat(member_data, 2, width=68)
 
         literal = nodes.literal_block(code, code)
-        literal['language'] = 'python'
+        literal["language"] = "python"
 
-        return [
-            addnodes.desc_name(text=member_name),
-            addnodes.desc_content('', literal)
-        ]
+        return [addnodes.desc_name(text=member_name), addnodes.desc_content("", literal)]
 
 
 def autodoc_skip_member(app, what, name, obj, skip, options):
@@ -76,8 +78,8 @@ def autodoc_skip_member(app, what, name, obj, skip, options):
 
 
 def setup(app):
-    app.add_directive('pprint', PrettyPrintDirective)
-    app.connect('autodoc-skip-member', autodoc_skip_member)
+    app.add_directive("pprint", PrettyPrintDirective)
+    app.connect("autodoc-skip-member", autodoc_skip_member)
 
 
 local_path = os.path.dirname(os.path.realpath(__file__))
@@ -86,7 +88,6 @@ def setup(app):
 try:
     from pyedb import __version__
 except ImportError:
-
     sys.path.append(os.path.abspath(os.path.join(local_path)))
     sys.path.append(os.path.join(root_path))
     from pyedb import __version__
@@ -246,7 +247,6 @@ def setup(app):
 
 # gallery build requires AEDT install
 if os.name != "posix" and "PYAEDT_CI_NO_EXAMPLES" not in os.environ:
-
     # suppress annoying matplotlib bug
     warnings.filterwarnings(
         "ignore",
@@ -267,7 +267,7 @@ def setup(app):
             "examples_dirs": ["../../examples/"],
             # path where to save gallery generated examples
             "gallery_dirs": ["examples"],
-            # Patter to search for examples files
+            # Pattern to search for examples files
             "filename_pattern": r"\.py",
             # Remove the "Download all examples" button from the top level gallery
             "download_all_examples": False,
@@ -351,7 +351,7 @@ def setup(app):
 # These paths are either relative to html_static_path
 # or fully qualified paths (eg. https://...)
 html_css_files = [
-    'custom.css',
+    "custom.css",
 ]
 
 # -- Options for HTMLHelp output ---------------------------------------------

examples/legacy/01_edb_example.py

@@ -8,17 +8,15 @@
 # ~~~~~~~~~~~~~~~~~~~~~~~~
 # Perform required imports.
 
-import shutil
-
 import os
 import time
+
 import pyedb
-from pyedb.legacy.downloads import download_file
 from pyedb.generic.general_methods import generate_unique_folder_name
-
+from pyedb.legacy.downloads import download_file
 
 temp_folder = generate_unique_folder_name()
-targetfile = download_file('edb/ANSYS-HSD_V1.aedb', destination=temp_folder)
+targetfile = download_file("edb/ANSYS-HSD_V1.aedb", destination=temp_folder)
 
 siwave_file = os.path.join(os.path.dirname(targetfile), "ANSYS-HSD_V1.siw")
 print(targetfile)
@@ -123,7 +121,6 @@
 print(edb.stackup.limits())
 
 
-
 ###############################################################################
 # Create voltage source and Siwave DCIR analysis
 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -137,22 +134,24 @@
 setup.add_source_terminal_to_ground("V1", 1)
 
 
-
 ###############################################################################
 # Save modifications
 # ~~~~~~~~~~~~~~~~~~
 # Save modifications.
 
 edb.save_edb()
-edb.nets.plot(None, "1_Top",plot_components_on_top=True)
+edb.nets.plot(None, "1_Top", plot_components_on_top=True)
 
 siw_file = edb.solve_siwave()
 
 ###############################################################################
 # Export Siwave Reports
 # ~~~~~~~~~~~~~~~~~~~~~
 # Export all DC Reports quantities.
-outputs = edb.export_siwave_dc_results(siw_file, setup.name, )
+outputs = edb.export_siwave_dc_results(
+    siw_file,
+    setup.name,
+)
 
 ###############################################################################
 # Close EDB