[Improve][Document] Refactor job env config document

docs/en/concept/JobEnvConfig.md

@@ -21,14 +21,26 @@ You can configure whether the task is in batch or stream mode through `job.mode`
 
 ### checkpoint.interval
 
-Gets the interval in which checkpoints are periodically scheduled.
+Gets the interval (milliseconds) in which checkpoints are periodically scheduled.
 
-In `STREAMING` mode, checkpoints is required, if you do not set it, it will be obtained from the application configuration file `seatunnel.yaml`. In `BATCH` mode, you can disable checkpoints by not setting this parameter.
+In `STREAMING` mode, checkpoints is required, if you do not set it, it will be obtained from the application configuration file `seatunnel.yaml`. In `BATCH` mode, you can disable checkpoints by not setting this parameter. In Zeta `STREAMING` mode, the default value is 30000 milliseconds.
+
+### checkpoint.timeout
+
+The timeout (in milliseconds) for a checkpoint. If the checkpoint is not completed before the timeout, the job will fail. In Zeta, the default value is 30000 milliseconds.
 
 ### parallelism
 
 This parameter configures the parallelism of source and sink.
 
+### shade.identifier
+
+Specify the method of encryption, if you didn't have the requirement for encrypting or decrypting config files, this option can be ignored.
+
+For more details, you can refer to the documentation [Config Encryption Decryption](../connector-v2/Config-Encryption-Decryption.md)
+
+## Zeta Engine Parameter
+
 ### job.retry.times
 
 Used to control the default retry times when a job fails. The default value is 3, and it only works in the Zeta engine.
@@ -43,12 +55,6 @@ This parameter is used to specify the location of the savemode when the job is e
 The default value is `CLUSTER`, which means that the savemode is executed on the cluster. If you want to execute the savemode on the client,
 you can set it to `CLIENT`. Please use `CLUSTER` mode as much as possible, because when there are no problems with `CLUSTER` mode, we will remove `CLIENT` mode.
 
-### shade.identifier
-
-Specify the method of encryption, if you didn't have the requirement for encrypting or decrypting config files, this option can be ignored.
-
-For more details, you can refer to the documentation [Config Encryption Decryption](../connector-v2/Config-Encryption-Decryption.md)
-
 ## Flink Engine Parameter
 
 Here are some SeaTunnel parameter names corresponding to the names in Flink, not all of them. Please refer to the official [Flink Documentation](https://flink.apache.org/).

docs/en/connector-v2/sink/Assert.md

@@ -4,7 +4,7 @@
 
 ## Description
 
-A flink sink plugin which can assert illegal data by user defined rules
+A sink plugin which can assert illegal data by user defined rules
 
 ## Key Features
 

docs/en/start-v2/docker/docker.md

@@ -146,14 +146,14 @@ docker run --rm -it apache/seatunnel bash -c '<YOUR_FLINK_HOME>/bin/start-cluste
 
 there has 2 ways to create cluster within docker.
 
-### 1. Use Docker Directly
+### Use Docker Directly
 
-1. create a network
+#### create a network
 ```shell
 docker network create seatunnel-network
 ```
 
-2. start the nodes
+#### start the nodes
 - start master node
 ```shell
 ## start master and export 5801 port 
@@ -213,7 +213,7 @@ docker run -d --name seatunnel_worker_1 \
 ```
 
 
-### 2. Use Docker-compose
+### Use Docker-compose
 
 > docker cluster mode is only support zeta engine.
 
@@ -368,7 +368,7 @@ and run `docker-compose up -d` command, the new worker node will start, and the
 
 ### Job Operation on cluster
 
-1. use docker as a client
+#### use docker as a client
 - submit job :
 ```shell
 docker run --name seatunnel_client \
@@ -393,7 +393,7 @@ more command please refer [user-command](../../seatunnel-engine/user-command.md)
 
 
 
-2. use rest api
+#### use rest api
 
 please refer [Submit A Job](../../seatunnel-engine/rest-api.md#submit-a-job)
 

docs/en/start-v2/locally/deployment.md

@@ -69,7 +69,7 @@ You can download the source code from the [download page](https://seatunnel.apac
 
 ```shell
 cd seatunnel
-sh ./mvnw clean package -DskipTests -Dskip.spotless=true
+sh ./mvnw clean install -DskipTests -Dskip.spotless=true
 # get the binary package
 cp seatunnel-dist/target/apache-seatunnel-2.3.8-bin.tar.gz /The-Path-You-Want-To-Copy
 

docs/zh/concept/JobEnvConfig.md

@@ -21,14 +21,26 @@
 
 ### checkpoint.interval
 
-获取定时调度检查点的时间间隔。
+获取定时调度检查点的时间间隔(毫秒)。
 
-在`STREAMING`模式下，检查点是必须的，如果不设置，将从应用程序配置文件`seatunnel.yaml`中获取。 在`BATCH`模式下，您可以通过不设置此参数来禁用检查点。
+在`STREAMING`模式下，检查点是必须的，如果不设置，将从应用程序配置文件`seatunnel.yaml`中获取。 在`BATCH`模式下，您可以通过不设置此参数来禁用检查点。在Zeta `STREAMING`模式下，默认值为30000毫秒。
+
+### checkpoint.timeout
+
+检查点的超时时间(毫秒)。如果检查点在超时之前没有完成，作业将失败。在Zeta中，默认值为30000毫秒。
 
 ### parallelism
 
 该参数配置source和sink的并行度。
 
+### shade.identifier
+
+指定加密方式，如果您没有加密或解密配置文件的需求，此选项可以忽略。
+
+更多详细信息，您可以参考文档 [Config Encryption Decryption](../../en/connector-v2/Config-Encryption-Decryption.md)
+
+## Zeta 引擎参数
+
 ### job.retry.times
 
 用于控制作业失败时的默认重试次数。默认值为3，并且仅适用于Zeta引擎。
@@ -44,12 +56,6 @@
 当值为`CLIENT`时，SaveMode操作在作业提交的过程中执行，使用shell脚本提交作业时，该过程在提交作业的shell进程中执行。使用rest api提交作业时，该过程在http请求的处理线程中执行。
 请尽量使用`CLUSTER`模式，因为当`CLUSTER`模式没有问题时，我们将删除`CLIENT`模式。
 
-### shade.identifier
-
-指定加密方式，如果您没有加密或解密配置文件的需求，此选项可以忽略。
-
-更多详细信息，您可以参考文档 [Config Encryption Decryption](../../en/connector-v2/Config-Encryption-Decryption.md)
-
 ## Flink 引擎参数
 
 这里列出了一些与 Flink 中名称相对应的 SeaTunnel 参数名称，并非全部，更多内容请参考官方 [Flink Documentation](https://flink.apache.org/) for more.

docs/zh/start-v2/docker/docker.md

@@ -149,14 +149,14 @@ docker下的集群模式仅支持Zeta引擎
 有两种方式来启动集群
 
 
-### 1. 直接使用Docker
+### 直接使用Docker
 
-1. 创建一个network
+#### 创建一个network
 ```shell
 docker network create seatunnel-network
 ```
 
-2. 启动节点
+#### 启动节点
 - 启动master节点
 ```shell
 ## start master and export 5801 port 
@@ -214,7 +214,7 @@ docker run -d --name seatunnel_worker_1 \
     ./bin/seatunnel-cluster.sh -r worker
 ```
 
-### 2. 使用docker-compose
+### 使用docker-compose
 `docker-compose.yaml` 配置文件为：
 ```yaml
 version: '3.8'
@@ -360,7 +360,7 @@ networks:
 
 ### 提交作业到集群
 
-1. 使用docker container作为客户端
+#### 使用docker container作为客户端
 - 提交任务
 ```shell
 docker run --name seatunnel_client \
@@ -383,5 +383,5 @@ docker run --name seatunnel_client \
 
 更多其他命令请参考[命令行工具](../../seatunnel-engine/user-command.md)
 
-2. 使用RestAPI
+#### 使用RestAPI
 请参考 [提交作业](../../seatunnel-engine/rest-api.md#提交作业)

docs/zh/start-v2/locally/deployment.md

@@ -69,7 +69,7 @@ connector-console
 
 ```shell
 cd seatunnel
-sh ./mvnw clean package -DskipTests -Dskip.spotless=true
+sh ./mvnw clean install -DskipTests -Dskip.spotless=true
 # 获取构建好的二进制包
 cp seatunnel-dist/target/apache-seatunnel-2.3.8-bin.tar.gz /The-Path-You-Want-To-Copy