ZMK config fo proXiao shields.
proXiao is a bluetooth controller for:
Support for Lily58, Sofle, reviung41 is implemented only on PCB v3. Screens and backlight are not supported. FTo support encoders, you need PCB v3 and solder an additional wire.
By switching between branches in this repository, you can choose the configuration for your keyboard. For a Corne or other compatible 6-column keyboard, you should select the corne branch.
If you have problems, flash the firmware to clear the settings from the branch setting-reset.
You can change the device name in file config/proXiao.conf in line
CONFIG_ZMK_KEYBOARD_NAME="proXiao"
Pre-build firmware can be downloaded in the releases.