PSWatch

pswatch is a minimalist process monitoring and task scheduler that allows you to watch system processes and run custom commands when specific conditions or patterns are matched.

Features

• Process Matching: match running processes by substring or regex patterns in name, exe path or the entire command line.
• Define conditions and actions.
• Execute actions when conditions are met on the matched processes.
• Create multiple profiles for complex conditions and action sets
• Systemd notify process type integration.

Installation

From Crates.io

cargo install pswatch

From source

git clone https://github.com/your-username/pswatch.git
cd pswatch
cargo install --path .

Usage

Pswatch requires a TOML based configuration file. By default it uses the config file under $XDG_CONFIG_DIR/pswatch/config.toml or the one provided as parameter.

./pswatch -c /path/to/config.toml

The program will watch system processes and execute commands based on the patterns defined in the configuration file.

Configuration File

pswatch's behavior is configured using a TOML-formatted configuration file. The file should contain a list of profiles, each containing a matching directive (the process to match), an (optional) regex flag (set to true if the pattern is a regular expression), and a list of commands.

Each command contains a condition (either seen or not_seen with a duration) and an array of shell commands (exec) to execute when the condition is met. An optional run_once flag can be set to run the command only once per process detection.

Here's an example configuration file:

[[profiles]]
matching = { name = "foo" }

# command 1
[[profiles.commands]]
condition = {seen = "5s"}
exec = ["sh", "-c", "notify-send psw 'foo action'"]

# command 2 
[[profiles.commands]]
condition = { not_seen = "60s" }
exec = ["sh", "-c", "notify-send psw 'where is foo ?'"]
run_once = true

Example: Toggle Power Saving

Here is a more realistic example that toggles the CPU turbo mode or power saving when a compilation job is detected:

[[profiles]]

# matches common compilers for C,C++ and Rust
matching = { name = 'cc1.*|^cc$|gcc$|c\+\+$|c89$|c99$|cpp$|g\+\+$|rustc$', regex = true }

[[profiles.commands]]
condition = {seen = "3s"}

# command to execute when condition is met
exec = ["sh", "-c", "enable_turbo"]

# when exec_end is defined the schedule behaves like a toggle
# command is executed when exiting the condition
exec_end = ["sh", "-c",  "disable_turbo"]

Examples with Multiple Profiles

You can use multiple profiles within a single configuration file to monitor different processes and execute commands for matched conditions. Here's an example configuration that uses two profiles:

[[profiles]]
pattern = "bar"

# matches the process name
matching = { name = "bar" }

[[profiles.commands]]
condition = {not_seen = "5s"}
exec = ["sh", "-c", "notify-send psw 'bar not seen!'"]

[[profiles]]
# matches the full executable path
matching = { exe_path = '.*baz$', regex = true}

[[profiles.commands]]
condition = {seen = "10s"}
exec = ["sh", "-c", "notify-send psw '/baz action !'"]
run_once = true # run the command only once when a match is triggered


[[profiles]]
# matches the command line
matching = { cmdline = '\-buz.*', regex = true}

[[profiles.commands]]
condition = {seen = "10s"}
exec = ["sh", "-c", "notify-send psw 'someproc -buz action !'"]

In this example, pswatch will watch for three processes: "bar", "baz" and "buz".

• It matches bar by process name (simple string).
• Matches .*baz$ and \-buz.* by a regex pattern of the executable path and command line respectively.
• When "bar" is not seen for 5 seconds, it will execute the exec action.
• When "baz" (a regular expression) is detected, it will execute the corresponding exec after a delay of 10 seconds.
• The command for "baz" will be run only once per process detection.

Example Scenarios

1. Execute a command when a specific process is seen for a certain duration

   • Define a watch with the desired process name and use {seen = "duration"} to specify that the command should be executed when the process has been running for a specified duration (e.g., "5s").

2. Execute a command when a specific process is not seen for a certain duration

   • Define a watch with the desired process name and use {not_seen = "duration"} to specify that the command should be executed when the process has been absent for a specified duration (e.g., "5s").

3. Execute multiple commands based on different conditions

   • Define multiple watch configurations in the same TOML file and specify separate condition and exec settings for each. pswatch will monitor all configured profiles and execute their respective commands when appropriate.

Systemd User Unit

[Unit]
Description=pswatch process watcher

[Service]
Type=notify
ExecStart=%h/.cargo/bin/pswatch
Restart=on-failure
; Use this to enable debug or trace
;Environment=RUST_LOG=debug

[Install]
WantedBy=default.target

Troubleshooting

You can enable more verbose output using the -d flag or setting the environment variable to debug or trace.

Contributing

Contributions are welcome ! If you'd like to contribute, please follow these steps:

1. Fork the repository on GitHub.
2. Clone your fork to your local machine: git clone https://github.com/your-username/pswatch.git. 3. Create a new branch for your changes: git checkout -b my-feature. 4. Make your changes and commit them with descriptive messages: git commit -am 'Add some feature'. 5. Push your branch: git push origin my-feature. 6. Submit a pull request from your GitHub fork to the main repository.

License

pswatch is licensed under the AGPLv3 License.

See LICENSE for more details.