Tracking: mount path cleanups #6
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This is a follow on to commit b10effb ("fix buffer overrun while the I219 is processing DMA transactions") to address David Laights concerns about the use of "magic" numbers. So define masks as well as add additional code comments to give a better understanding of what needs to be done to avoid a buffer overrun. Signed-off-by: Sasha Neftin <[email protected]> Reviewed-by: Alexander H Duyck <[email protected]> Reviewed-by: Dima Ruinskiy <[email protected]> Reviewed-by: Raanan Avargil <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Adding cloud filters could fail for a number of reasons, unsupported filter fields for example, which fails during validation of fields itself. This will not result in admin command errors and converting the admin queue status to posix error code using i40e_aq_rc_to_posix would result in incorrect error values. If the failure was due to AQ error itself, reporting that correctly is handled in the inner function. Signed-off-by: Amritha Nambiar <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Ahmad Fatoum <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
The apparmor_audit_data struct ordering got messed up during a merge conflict, resulting in the signal integer and peer pointer being in a union instead of a struct. For most of the 4.13 and 4.14 life cycle, this was hidden by commit 651e28c ("apparmor: add base infastructure for socket mediation") which fixed the apparmor_audit_data struct when its data was added. When that commit was reverted in -rc7 the signal audit bug was exposed, and unfortunately it never showed up in any of the testing until after 4.14 was released. Shaun Khan, Zephaniah E. Loss-Cutler-Hull filed nearly simultaneous bug reports (with different oopes, the smaller of which is included below). Full credit goes to Tetsuo Handa for jumping on this as well and noticing the audit data struct problem and reporting it. [ 76.178568] BUG: unable to handle kernel paging request at ffffffff0eee3bc0 [ 76.178579] IP: audit_signal_cb+0x6c/0xe0 [ 76.178581] PGD 1a640a067 P4D 1a640a067 PUD 0 [ 76.178586] Oops: 0000 [#1] PREEMPT SMP [ 76.178589] Modules linked in: fuse rfcomm bnep usblp uvcvideo btusb btrtl btbcm btintel bluetooth ecdh_generic ip6table_filter ip6_tables xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables x_tables intel_rapl joydev wmi_bmof serio_raw iwldvm iwlwifi shpchp kvm_intel kvm irqbypass autofs4 algif_skcipher nls_iso8859_1 nls_cp437 crc32_pclmul ghash_clmulni_intel [ 76.178620] CPU: 0 PID: 10675 Comm: pidgin Not tainted 4.14.0-f1-dirty torvalds#135 [ 76.178623] Hardware name: Hewlett-Packard HP EliteBook Folio 9470m/18DF, BIOS 68IBD Ver. F.62 10/22/2015 [ 76.178625] task: ffff9c7a94c31dc0 task.stack: ffffa09b02a4c000 [ 76.178628] RIP: 0010:audit_signal_cb+0x6c/0xe0 [ 76.178631] RSP: 0018:ffffa09b02a4fc08 EFLAGS: 00010292 [ 76.178634] RAX: ffffa09b02a4fd60 RBX: ffff9c7aee0741f8 RCX: 0000000000000000 [ 76.178636] RDX: ffffffffee012290 RSI: 0000000000000006 RDI: ffff9c7a9493d800 [ 76.178638] RBP: ffffa09b02a4fd40 R08: 000000000000004d R09: ffffa09b02a4fc46 [ 76.178641] R10: ffffa09b02a4fcb8 R11: ffff9c7ab44f5072 R12: ffffa09b02a4fd40 [ 76.178643] R13: ffffffff9e447be0 R14: ffff9c7a94c31dc0 R15: 0000000000000001 [ 76.178646] FS: 00007f8b11ba2a80(0000) GS:ffff9c7afea00000(0000) knlGS:0000000000000000 [ 76.178648] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 76.178650] CR2: ffffffff0eee3bc0 CR3: 00000003d5209002 CR4: 00000000001606f0 [ 76.178652] Call Trace: [ 76.178660] common_lsm_audit+0x1da/0x780 [ 76.178665] ? d_absolute_path+0x60/0x90 [ 76.178669] ? aa_check_perms+0xcd/0xe0 [ 76.178672] aa_check_perms+0xcd/0xe0 [ 76.178675] profile_signal_perm.part.0+0x90/0xa0 [ 76.178679] aa_may_signal+0x16e/0x1b0 [ 76.178686] apparmor_task_kill+0x51/0x120 [ 76.178690] security_task_kill+0x44/0x60 [ 76.178695] group_send_sig_info+0x25/0x60 [ 76.178699] kill_pid_info+0x36/0x60 [ 76.178703] SYSC_kill+0xdb/0x180 [ 76.178707] ? preempt_count_sub+0x92/0xd0 [ 76.178712] ? _raw_write_unlock_irq+0x13/0x30 [ 76.178716] ? task_work_run+0x6a/0x90 [ 76.178720] ? exit_to_usermode_loop+0x80/0xa0 [ 76.178723] entry_SYSCALL_64_fastpath+0x13/0x94 [ 76.178727] RIP: 0033:0x7f8b0e58b767 [ 76.178729] RSP: 002b:00007fff19efd4d8 EFLAGS: 00000206 ORIG_RAX: 000000000000003e [ 76.178732] RAX: ffffffffffffffda RBX: 0000557f3e3c2050 RCX: 00007f8b0e58b767 [ 76.178735] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000263b [ 76.178737] RBP: 0000000000000000 R08: 0000557f3e3c2270 R09: 0000000000000001 [ 76.178739] R10: 000000000000022d R11: 0000000000000206 R12: 0000000000000000 [ 76.178741] R13: 0000000000000001 R14: 0000557f3e3c13c0 R15: 0000000000000000 [ 76.178745] Code: 48 8b 55 18 48 89 df 41 b8 20 00 08 01 5b 5d 48 8b 42 10 48 8b 52 30 48 63 48 4c 48 8b 44 c8 48 31 c9 48 8b 70 38 e9 f4 fd 00 00 <48> 8b 14 d5 40 27 e5 9e 48 c7 c6 7d 07 19 9f 48 89 df e8 fd 35 [ 76.178794] RIP: audit_signal_cb+0x6c/0xe0 RSP: ffffa09b02a4fc08 [ 76.178796] CR2: ffffffff0eee3bc0 [ 76.178799] ---[ end trace 514af9529297f1a3 ]--- Fixes: cd1dbf7 ("apparmor: add the ability to mediate signals") Reported-by: Zephaniah E. Loss-Cutler-Hull <[email protected]> Reported-by: Shuah Khan <[email protected]> Suggested-by: Tetsuo Handa <[email protected]> Tested-by: Ivan Kozik <[email protected]> Tested-by: Zephaniah E. Loss-Cutler-Hull <[email protected]> Tested-by: Christian Boltz <[email protected]> Tested-by: Shuah Khan <[email protected]> Cc: [email protected] Signed-off-by: John Johansen <[email protected]>
This just changes the file to report them as zero, although maybe even that could be removed. I checked, and at least procps doesn't actually seem to parse the 'stack' file at all. And since the file doesn't necessarily even exist (it requires CONFIG_STACKTRACE), possibly other tools don't really use it either. That said, in case somebody parses it with tools, just having that zero there should keep such tools happy. Signed-off-by: Linus Torvalds <[email protected]>
Power values in the 100s of watt range can easily blow past 32bit math limits when processing everything in microwatts. Use 64bit math instead to avoid these issues on common 32bit ARM BMC platforms. Fixes: 442aba7 ("hwmon: PMBus device driver") Signed-off-by: Robert Lippert <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
We can only specify the one slave address to indexed reads/writes. Make sure the messages we check are destined to the same slave address before deciding to do an indexed transfer. Cc: [email protected] Cc: Daniel Kurtz <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Sean Paul <[email protected]> Fixes: 56f9eac ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]> (cherry picked from commit c4deb62) Signed-off-by: Joonas Lahtinen <[email protected]>
The hardware always writes one or two bytes in the index portion of an indexed transfer. Make sure the message we send as the index doesn't have a zero length. Cc: [email protected] Cc: Daniel Kurtz <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Sean Paul <[email protected]> Fixes: 56f9eac ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]> (cherry picked from commit bb9e0d4) Signed-off-by: Joonas Lahtinen <[email protected]>
As both the hotplug event and fbdev configuration run asynchronously, it is possible for them to run concurrently. If configuration fails, we were freeing the fbdev causing a use-after-free in the hotplug event. <7>[ 3069.935211] [drm:intel_fb_initial_config [i915]] Not using firmware configuration <7>[ 3069.935225] [drm:drm_setup_crtcs] looking for cmdline mode on connector 77 <7>[ 3069.935229] [drm:drm_setup_crtcs] looking for preferred mode on connector 77 0 <7>[ 3069.935233] [drm:drm_setup_crtcs] found mode 3200x1800 <7>[ 3069.935236] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config <7>[ 3069.935253] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 43 (0,0) <7>[ 3069.935323] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <4>[ 3069.967737] general protection fault: 0000 [#1] PREEMPT SMP <0>[ 3069.977453] --------------------------------- <4>[ 3069.977457] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mei_me mii prime_numbers mei i2c_hid pinctrl_geminilake pinctrl_intel [last unloaded: i915] <4>[ 3069.977492] CPU: 1 PID: 15414 Comm: kworker/1:0 Tainted: G U 4.14.0-CI-CI_DRM_3388+ #1 <4>[ 3069.977497] Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 3069.977508] Workqueue: events output_poll_execute <4>[ 3069.977512] task: ffff880177734e40 task.stack: ffffc90001fe4000 <4>[ 3069.977519] RIP: 0010:__lock_acquire+0x109/0x1b60 <4>[ 3069.977523] RSP: 0018:ffffc90001fe7bb0 EFLAGS: 00010002 <4>[ 3069.977526] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000282 RCX: 0000000000000000 <4>[ 3069.977530] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880170d4efd0 <4>[ 3069.977534] RBP: ffffc90001fe7c70 R08: 0000000000000001 R09: 0000000000000000 <4>[ 3069.977538] R10: 0000000000000000 R11: ffffffff81899609 R12: ffff880170d4efd0 <4>[ 3069.977542] R13: ffff880177734e40 R14: 0000000000000001 R15: 0000000000000000 <4>[ 3069.977547] FS: 0000000000000000(0000) GS:ffff88017fc80000(0000) knlGS:0000000000000000 <4>[ 3069.977551] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 3069.977555] CR2: 00007f7e8b7bcf04 CR3: 0000000003e0f000 CR4: 00000000003406e0 <4>[ 3069.977559] Call Trace: <4>[ 3069.977565] ? mark_held_locks+0x64/0x90 <4>[ 3069.977571] ? _raw_spin_unlock_irq+0x24/0x50 <4>[ 3069.977575] ? _raw_spin_unlock_irq+0x24/0x50 <4>[ 3069.977579] ? trace_hardirqs_on_caller+0xde/0x1c0 <4>[ 3069.977583] ? _raw_spin_unlock_irq+0x2f/0x50 <4>[ 3069.977588] ? finish_task_switch+0xa5/0x210 <4>[ 3069.977592] ? lock_acquire+0xaf/0x200 <4>[ 3069.977596] lock_acquire+0xaf/0x200 <4>[ 3069.977600] ? __mutex_lock+0x5e9/0x9b0 <4>[ 3069.977604] _raw_spin_lock+0x2a/0x40 <4>[ 3069.977608] ? __mutex_lock+0x5e9/0x9b0 <4>[ 3069.977612] __mutex_lock+0x5e9/0x9b0 <4>[ 3069.977616] ? drm_fb_helper_hotplug_event.part.19+0x16/0xa0 <4>[ 3069.977621] ? drm_fb_helper_hotplug_event.part.19+0x16/0xa0 <4>[ 3069.977625] drm_fb_helper_hotplug_event.part.19+0x16/0xa0 <4>[ 3069.977630] output_poll_execute+0x8d/0x180 <4>[ 3069.977635] process_one_work+0x22e/0x660 <4>[ 3069.977640] worker_thread+0x48/0x3a0 <4>[ 3069.977644] ? _raw_spin_unlock_irqrestore+0x4c/0x60 <4>[ 3069.977649] kthread+0x102/0x140 <4>[ 3069.977653] ? process_one_work+0x660/0x660 <4>[ 3069.977657] ? kthread_create_on_node+0x40/0x40 <4>[ 3069.977662] ret_from_fork+0x27/0x40 <4>[ 3069.977666] Code: 8d 62 f8 c3 49 81 3c 24 e0 fa 3c 82 41 be 00 00 00 00 45 0f 45 f0 83 fe 01 77 86 89 f0 49 8b 44 c4 08 48 85 c0 0f 84 76 ff ff ff <f0> ff 80 38 01 00 00 8b 1d 62 f9 e8 01 45 8b 85 b8 08 00 00 85 <1>[ 3069.977707] RIP: __lock_acquire+0x109/0x1b60 RSP: ffffc90001fe7bb0 <4>[ 3069.977712] ---[ end trace 4ad012eb3af62df7 ]--- In order to keep the dev_priv->ifbdev alive after failure, we have to avoid the free and leave it empty until we unload the module (which is less than ideal, but a necessary evil for simplicity). Then we can use intel_fbdev_sync() to serialise the hotplug event with the configuration. The serialisation between the two was removed in commit 934458c ("Revert "drm/i915: Fix races on fbdev""), but the use after free is much older, commit 366e39b ("drm/i915: Tear down fbdev if initialization fails") Fixes: 366e39b ("drm/i915: Tear down fbdev if initialization fails") Fixes: 934458c ("Revert "drm/i915: Fix races on fbdev"") Signed-off-by: Chris Wilson <[email protected]> Cc: Lukas Wunner <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Reviewed-by: Lukas Wunner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit ad88d7f) Signed-off-by: Joonas Lahtinen <[email protected]>
The alternative intel_backlight_device_register() definition apparently never got used, but I have now run into a case of i915 being compiled without CONFIG_BACKLIGHT_CLASS_DEVICE, resulting in a number of identical warnings: drivers/gpu/drm/i915/intel_drv.h:1739:12: error: 'intel_backlight_device_register' defined but not used [-Werror=unused-function] This marks the function as 'inline', which was surely the original intention here. Fixes: 1ebaa0b ("drm/i915: Move backlight registration to connector registration") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2de2d0b) Signed-off-by: Joonas Lahtinen <[email protected]>
The caller of shadow_context_status_change may disable irqs. So it is not safe to use spin_unlock_bh in such context. Let's switch to irqsave version for safety. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4504 at kernel/softirq.c:161 __local_bh_enable_ip+0x46/0x60 [ 168.797710] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 168.797712] task: ffff8c693d22db80 task.stack: ffffb51b482bc000 [ 168.797718] RIP: 0010:__local_bh_enable_ip+0x46/0x60 [ 168.797721] RSP: 0018:ffffb51b482bfa10 EFLAGS: 00010046 [ 168.797724] RAX: 0000000000000046 RBX: ffff8c6900278000 RCX: 00000000ffffffff [ 168.797726] RDX: 0000000000000001 RSI: 0000000000000200 RDI: ffffffffc06a0330 [ 168.797728] RBP: ffffb51b482bfa10 R08: 0000000000000000 R09: ffff8c690027cb90 [ 168.797730] R10: ffffb51b482bfa40 R11: 00000004072f0001 R12: 0000000000000000 [ 168.797732] R13: 0000000000000000 R14: ffff8c690027ca9c R15: 0000000000000000 [ 168.797735] FS: 00007ff187c56700(0000) GS:ffff8c6959d00000(0000) knlGS:0000000000000000 [ 168.797738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.797740] CR2: 0000562bc0c3991f CR3: 0000000430614006 CR4: 00000000003606e0 [ 168.797742] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.797744] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.797745] Call Trace: [ 168.797755] _raw_spin_unlock_bh+0x1e/0x20 [ 168.797826] shadow_context_status_change+0x120/0x1e0 [i915] [ 168.797831] notifier_call_chain+0x4a/0x70 [ 168.797834] atomic_notifier_call_chain+0x1a/0x20 [ 168.797896] execlists_cancel_port_requests+0x4f/0x80 [i915] [ 168.797956] reset_common_ring+0x30/0x100 [i915] [ 168.798007] i915_gem_reset_engine+0x114/0x330 [i915] [ 168.798060] ? i915_gem_retire_requests+0x75/0x180 [i915] [ 168.798111] i915_gem_reset+0x3e/0xb0 [i915] [ 168.798149] i915_reset+0x10b/0x1c0 [i915] [ 168.798187] i915_reset_device+0x209/0x220 [i915] [ 168.798225] ? gen8_gt_irq_ack+0x170/0x170 [i915] [ 168.798229] ? __queue_work+0x430/0x430 [ 168.798270] i915_handle_error+0x285/0x420 [i915] [ 168.798275] ? mntput+0x24/0x40 [ 168.798281] ? terminate_walk+0x8e/0xf0 [ 168.798328] i915_wedged_set+0x84/0xc0 [i915] [ 168.798333] simple_attr_write+0xab/0xc0 [ 168.798337] full_proxy_write+0x54/0x90 [ 168.798343] __vfs_write+0x37/0x170 [ 168.798349] ? common_file_perm+0x4c/0x100 [ 168.798355] ? apparmor_file_permission+0x1a/0x20 [ 168.798361] ? security_file_permission+0x3b/0xc0 [ 168.798365] vfs_write+0xb8/0x1b0 [ 168.798370] SyS_write+0x55/0xc0 [ 168.798376] entry_SYSCALL_64_fastpath+0x1e/0xa9 Fixes: 0e86cc9 ("drm/i915/gvt: implement per-vm mmio switching optimization") Signed-off-by: Changbin Du <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
With different settings of compressed data hash mode between VMs and host may cause gpu issues. Commit: 1999f10 ("drm/i915/gvt: Disable compression workaround for Gen9") disable compression workaround of guest in gvt host to align with host. Commit: 9356404 ("drm/i915: Switch over to the LLC/eLLC hotspot avoidance hash mode for CCS") add compression workaround, then we can remove the skl_misc_ctl_write hanlder. Better solution should be always keeping same settings as host, and bypass the write request from VMs, but it need to fetch data from host's "Context". Cc: Zhi Wang <[email protected]> Signed-off-by: Weinan Li <[email protected]> Signed-off-by: Xiong Zhang <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
Previously the performance is improved through the workload auditing and shadowing ahead of vGPU scheduling, however, there is the case that more requests are allocated in submit_context before the previous request is added, the timeline will hold its seqno which is later. This patch is to move the request alloc to dispatch_workload function, where is the same place as request is added. It will fix the issue of kernel BUG for (timeline->seqno != request->fence.seqno) check when add_request. Fixes: 89ea20b ("drm/i915/gvt: Factor out scan and shadow from workload dispatch") Signed-off-by: Chuanxiao Dong <[email protected]> Signed-off-by: fred gao <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]> (cherry picked from commit f2880e0)
when i915 driver unloading, it will shutdown all CRTCs and it will introudce kernel panic when conducting igt drv_module_reload test case under guest environment (bug reported by XENGT-468) as below: BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: intel_edp_backlight_off+0xe/0x7c [i915] RIP: 0010:intel_edp_backlight_off+0xe/0x7c [i915] Call Trace: intel_disable_ddi+0xb3/0xbc [i915] intel_modeset_setup_hw_state+0x654/0xb4c [i915] intel_modeset_init+0x9f1/0xe69 [i915] ? intel_i2c_reset+0x3d/0x40 [i915] ? intel_setup_gmbus+0xba/0x249 [i915] i915_driver_load+0xae5/0xcc0 [i915] i915_pci_probe+0x3a/0x3c [i915] local_pci_probe+0x38/0x7b pci_device_probe+0xec/0x12b driver_probe_device+0x134/0x294 __driver_attach+0x6a/0x8c ? driver_probe_device+0x294/0x294 bus_for_each_dev+0x68/0x80 driver_attach+0x19/0x1b bus_add_driver+0xea/0x1d3 ? 0xffffffffa03cd000 driver_register+0x85/0xc1 ? 0xffffffffa03cd000 __pci_register_driver+0x55/0x57 i915_init+0x57/0x5a [i915] do_one_initcall+0x8a/0x12e ? __vunmap+0x8d/0x93 ? kmem_cache_alloc_trace+0x96/0x11c do_init_module+0x5a/0x1e1 in this case, active connector detected but no active pipe available, so it will hang to disable connector. to fix, on vgpu creating, to report active pipe available for guest. Signed-off-by: Xiaolin Zhang <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
For ADDR_4K_MASK, bit[45..12] should be 1, all other bits should be 0. The current definition wrongly set bit[46] as 1 also. This path fixes this. v2: Add commit message, fixes and cc stable.(Zhenyu) Fixes: 2707e44("drm/i915/gvt: vGPU graphics memory virtualization") Signed-off-by: Xiong Zhang <[email protected]> Cc: [email protected] Signed-off-by: Zhenyu Wang <[email protected]>
…into drm-intel-fixes gvt-fixes-2017-11-28 - regression fix for sane request alloc (Fred) - locking fix (Changbin) - fix invalid addr mask (Xiong) - compression regression fix (Weinan) - fix default pipe enable for virtual display (Xiaolin) Signed-off-by: Joonas Lahtinen <[email protected]>
[BUG] If we run btrfs with CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y, it will instantly cause kernel panic like: ------ ... assertion failed: 0, file: fs/btrfs/disk-io.c, line: 3853 ... Call Trace: btrfs_mark_buffer_dirty+0x187/0x1f0 [btrfs] setup_items_for_insert+0x385/0x650 [btrfs] __btrfs_drop_extents+0x129a/0x1870 [btrfs] ... ----- [Cause] Btrfs will call btrfs_check_leaf() in btrfs_mark_buffer_dirty() to check if the leaf is valid with CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y. However quite some btrfs_mark_buffer_dirty() callers(*) don't really initialize its item data but only initialize its item pointers, leaving item data uninitialized. This makes tree-checker catch uninitialized data as error, causing such panic. *: These callers include but not limited to setup_items_for_insert() btrfs_split_item() btrfs_expand_item() [Fix] Add a new parameter @check_item_data to btrfs_check_leaf(). With @check_item_data set to false, item data check will be skipped and fallback to old btrfs_check_leaf() behavior. So we can still get early warning if we screw up item pointers, and avoid false panic. Cc: Filipe Manana <[email protected]> Reported-by: Lakshmipathi.G <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: Liu Bo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
…/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2017-11-27 This series contains updates to e1000, e1000e and i40e. Gustavo A. R. Silva fixes a sizeof() issue where we were taking the size of the pointer (which is always the size of the pointer). Sasha does a follow up fix to a previous fix for buffer overrun, to resolve community feedback from David Laight and the use of magic numbers. Amritha fixes the reporting of error codes for when adding a cloud filter fails. Ahmad Fatoum brushes the dust off the e1000 driver to fix a code comment and debug message which was incorrect about what the code was really doing. ==================== Signed-off-by: David S. Miller <[email protected]>
When a new local route is added, an IPIP entry is looked up to determine whether the route should be offloaded as a tunnel decap or as a trap. That decision should take into account whether the tunnel netdevice in question is actually IFF_UP, and only install a decap offload if it is. Fixes: 0063587 ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels") Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The mlxsw driver currently doesn't offload GRE tunnels if they have the same local address and use the same underlay VRF. When such a situation arises, the tunnels in conflict are demoted to slow path. However, the current code only verifies this condition on tunnel creation and tunnel change, not when a tunnel is moved to a different VRF. When the tunnel has no bound device, underlay and overlay are the same. Thus moving a tunnel moves the underlay as well, and that can cause local address conflict. So modify mlxsw_sp_netdevice_ipip_ol_vrf_event() to check if there are any conflicting tunnels, and demote them if yes. Fixes: af64171 ("mlxsw: spectrum_router: Onload conflicting tunnels") Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Some tunnels that are offloadable on their own can nonetheless be demoted to slow path if their local address is in conflict with that of another tunnel. When a route is formed for such a tunnel, mlxsw_sp_nexthop_ipip_init() fails to find the corresponding IPIP entry, and that triggers a FIB abort. Resolve the problem by not assuming that a tunnel for which mlxsw_sp_ipip_ops.can_offload() holds also automatically has an IPIP entry. Fixes: af64171 ("mlxsw: spectrum_router: Onload conflicting tunnels") Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The function mlxsw_sp_nexthop_rif_update() walks the list of nexthops associated with a RIF, and updates the corresponding entries in the switch. It is used in particular when a tunnel underlay netdevice moves to a different VRF, and all the nexthops are migrated over to a new RIF. The problem is that each nexthop holds a reference to its RIF, and that is not updated. So after the old RIF is gone, further activity on these nexthops (such as downing the underlay netdevice) dereferences a dangling pointer. Fix the issue by updating rif of impacted nexthops before calling mlxsw_sp_nexthop_rif_update(). Fixes: 0c5f1cd ("mlxsw: spectrum_router: Generalize __mlxsw_sp_ipip_entry_update_tunnel()") Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Jiri Pirko says: ==================== mlxsw: GRE offloading fixes Petr says: This patchset fixes a couple bugs in offloading GRE tunnels in mlxsw driver. Patch #1 fixes a problem that local routes pointing at a GRE tunnel device are offloaded even if that netdevice is down. Patch #2 detects that as a result of moving a GRE netdevice to a different VRF, two tunnels now have a conflict of local addresses, something that the mlxsw driver can't offload. Patch #3 fixes a FIB abort caused by forming a route pointing at a GRE tunnel that is eligible for offloading but already onloaded. Patch #4 fixes a problem that next hops migrated to a new RIF kept the old RIF reference, which went dangling shortly afterwards. ==================== Signed-off-by: David S. Miller <[email protected]>
In commit 6184fc0 ("quota: Propagate error from ->acquire_dquot()"), we have propagated error from __dquot_initialize to caller, but we forgot to handle such error in add_dquot_ref(), so, currently, during quota accounting information initialization flow, if we failed for some of inodes, we just ignore such error, and do account for others, which is not a good implementation. In this patch, we choose to let user be aware of such error, so after turning on quota successfully, we can make sure all inodes disk usage can be accounted, which will be more reasonable. Suggested-by: Jan Kara <[email protected]> Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jan Kara <[email protected]>
When an allocation in the txq_init path fails, the allocated buffers
end-up being freed twice: in the txq_init error path, and in txq_deinit.
This lead to issues as txq_deinit would work on already freed memory
regions:
kernel BUG at mm/slub.c:3915!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
This patch fixes this by removing the txq_init own error path, as the
txq_deinit function is always called on errors. This was introduced by
TSO as way more buffers are allocated.
Fixes: 186cd4d ("net: mvpp2: software tso support")
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
This patches fixes the probe error path by cleaning up probed ports, to avoid leaving registered net devices when the driver failed to probe. Fixes: 3f51850 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Short fragmented packets may never be sent by the hardware when padding is disabled. This patch stop modifying the GMAC padding bits, to leave them to their reset value (disabled). Fixes: 3919357 ("net: mvpp2: initialize the GMAC when using a port") Signed-off-by: Yan Markman <[email protected]> [Antoine: commit message] Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: David S. Miller <[email protected]>
This patch fixes the Tx ring size checks when using ethtool, by adding an extra check in the PPv2 check_ringparam_valid helper. The Tx ring size cannot be set to a value smaller than the minimum number of descriptors needed for TSO. Fixes: 1d17db0 ("net: mvpp2: limit TSO segments and use stop/wake thresholds") Suggested-by: Yan Markman <[email protected]> Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Antoine Tenart says: ==================== net: mvpp2: set of fixes This series fixes various issues with the Marvell PPv2 driver. The patches are sent together to avoid any possible conflict. The series is based on today's net tree. ==================== Signed-off-by: David S. Miller <[email protected]>
The Marvell 10G PHY driver supports different hardware revisions, which have their bits 3..0 differing. To get the correct revision number these bits should be ignored. This patch fixes this by using the already defined MARVELL_PHY_ID_MASK (0xfffffff0) instead of the custom 0xffffffff mask. Fixes: 20b2af3 ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Suggested-by: Yan Markman <[email protected]> Signed-off-by: Antoine Tenart <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Cleanup the mount path, remove the double call to mount_btrfs.