Skip to content

A Bridge between the Xiaomi Mi Smart Home Gateway and the Mqtt broker.

License

Notifications You must be signed in to change notification settings

cflurin/xiaomi-mqtt

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

79 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

xiaomi-mqtt

NPM version

A Bridge between the Xiaomi Mi Smart Home Gateway and the Mqtt broker.

Xiaomi-mqtt exchanges data between the xiaomi gateway and the mqtt-broker at a low-level, principally based on the device sid (Security Identifier?). The automation and dashboard tasks are implemented at a higher level. Node-RED is the perfect tool to use for this purpose.

Installation

sudo npm install -g xiaomi-mqtt

Installation from GitHub

Clone the source repository directly from GitHub to a local folder:

git clone https://github.com/cflurin/xiaomi-mqtt.git

Local Installation:

cd xiaomi-mqtt
npm install

Configuration

Copy the config.json file to the .xiaomi-mqtt folder inside of your home folder.

mkdir ~/.xiaomi-mqtt
cp config.json ~/.xiaomi-mqtt/

On Linux the full path for your config.json would be ~/.xiaomi-mqtt/config.json.

Edit ~/xiaomi-mqtt/config.json to fit your requirements:

{
  "xiaomi": {
    "serverPort": 9898,
    "multicastAddress": "224.0.0.50",
    "multicastPort": 4321,
    "password": "FFF..."
  },
  "mqtt": {
    "url": "mqtt://127.0.0.1",
    "port": 1883,
    "username": "foo",
    "password": "bar",
    "topic_mode": "short",
    "topic_prefix": "xiaomi"
  },
  "loglevel": "info",
  "heartbeatfreq": 6,
  "dataFormat": "parsed"
}
"topic_mode": <"short"> | <"full"> | <"both">
  • short default
  • full allow you to do some topic filtering directly on client side.
  • both 2 topics are sent, short and full.
"loglevel": <"debug"> | <"info"> | <"warn"> | <"error">

Replace 127.0.0.1 with the address of your mqtt broker.

Set dataFormat to raw to get data without parsing.

By default the gateway send heartbeat every 10s which can do some pollution when testing/debug, the counter parameter in config named heartbeatfreq avoid this, in the example above set to 6 means only send a MQTT message each 6 heartbeat, so each 60s. Note this apply only to gateway heartbeat not the device's one.

Usage (global installation)

Use xiaomi-mqtt or xm to run xiaomi-mqtt.
Use ctrl c to stop xiaomi-mqtt.

Usage (local installation)

In the xiaomi-mqtt folder.

Use npm start to run xiaomi-mqtt.
Use ctrl c to stop xiaomi-mqtt.

mqtt API

If the configuration option topic_mode is set to short or both, the data (payload) is sent/received in a JSON format using following topics:

  • xiaomi/from
  • xiaomi/to/read
  • xiaomi/to/write
  • xiaomi/to/get_id_list

Note: Have look at: How to benefit of the full topic option

Howto examples

At start and stop xiaomi-mqtt sends following messages.

start

topic: xiaomi/from
payload: {"cmd":"xm","msg":"xiaomi-mqtt started."}

and

topic: xiaomi/from
payload:
{
  "cmd":"get_id_list_ack",
  "sid":"fff...",
  "data":["158d00017118ac","158d0001a2eb66","158d0001f35b90","158d0001e52516"]
}

stop

topic: xiaomi/from
payload: {"cmd":"xm","msg":"xiaomi-mqtt stopped."}

heartbeat

gateway

topic: xiaomi/from
payload:
{
  "cmd": "heartbeat",
  "model": "gateway",
  "sid": "fff...",
  "short_id": "0",
  "token": "v4GeGCO9TBpTUlVy",
  "data": {
    "ip": "127.0.0.1"
  }
}

cube

topic: xiaomi/from
payload:
{
  "cmd": "heartbeat",
  "model": "cube",
  "sid": "158d0003102db5",
  "short_id": 46605,
  "data": {
    "voltage": 2985
  }
}

reporting

Xiaomi-mqtt sends periodically or on events device reports.

gateway

topic: xiaomi/from
payload:

{
  "cmd": "report",
  "model": "gateway",
  "sid": "fff...",
  "short_id": 0,
  "data": {
    "rgb": 0,
    "illumination": 1292
  }
}

sensor_ht

topic: xiaomi/from
payload:
{
  "cmd":"report",
  "model":"sensor_ht",
  "sid":"158d0001a2eb66",
  "short_id":30124,
  "data":{"voltage":3005,"temperature":16.7,"humidity":null}
}
"data": {"voltage":3005,"temperature":16.7,"humidity":null}
or
"data": {"voltage":3005,"temperature":null,"humidity":51.7}

magnet

topic: xiaomi/from
payload:
{
  "cmd": "report",
  "model": "magnet",
  "sid": "158d0001f3651f",
  "short_id": 57029,
  "data": {
    "status": "close"
  }
}
"status": "close", "open"

switch

topic: xiaomi/from
payload:
{
  "cmd":"report",
  "model":"switch",
  "sid":"158d0001f35b90",
  "short_id":46517,
  "data":{"status":"click"}
}
"status": "click", "double_click", "long_click_press", "long_click_release"

86sw2

topic: xiaomi/from
payload:
{
  "cmd":"report",
  "model":"86sw2",
  "sid":"158d0001f55b88",
  "short_id":33911,
  "data":{"channel_0":"click"}
}
"data":{"channel_0":"click"}
or
"data":{"channel_1":"click"}

cube

topic: xiaomi/from
payload:
{
  "cmd":"report",
  "model":"cube",
  "sid":"158d0003102db5",
  "short_id":46605,
  "data":{"status":"move"}
}
"status": "move", "flip90", "flip180", "tape_twice", "shake_air", "alert"
or
"rotate": "99,999", "-99.999"

read

gateway

topic: xiaomi/to/read
payload: {"sid":"fff..."}

response

topic: xiaomi/from
payload:
{
  "cmd":"read_ack",
  "model":"gateway",
  "sid":"fff...",
  "short_id":0,
  "data":{"rgb":0,"illumination":1292,"proto_version":"1.0.9"}
}

sensor_ht

topic: xiaomi/to/read
payload: {"sid":"158d00017118ac"}

response

topic: xiaomi/from
payload:
{
  "cmd":"read_ack",
  "model":"sensor_ht",
  "sid":"158d00017118ac",
  "short_id":48290,
  "data":{"voltage":2985,"temperature":19,"humidity":46.3}
}

switch

topic: xiaomi/to/read
payload: {"sid":"158d0001f35b90"}

response

topic: xiaomi/from
payload:
{
  "cmd":"read_ack",
  "model":"switch",
  "sid":"158d0001f35b90",
  "short_id":46517,
  "data":{"voltage":3112}
}

write

topic: xiaomi/to/write
payload:
{
  "cmd": "write",
  "model": "gateway",
  "sid": "fff...",
  "data": {
      "rgb": "1000FF00"
  }
}

Note: rgb = [brightness] [red] [green] [blue] - each hex 00 to FF

response

topic: xiaomi/from
payload:
{
  "cmd":"write_ack",
  "model":"gateway",
  "sid":"fff...",
  "short_id":0,
  "data":{"rgb":268500736,"illumination":1292,"proto_version":"1.0.9"}
}

get_id_list:

topic: xiaomi/to/get_id_list
payload: {"sid":"fff..."}

Note: sid = gateway sid.

response

topic: xiaomi/from
payload:
{
  "cmd":"get_id_list_ack",
  "sid":"fff...",
  "data":["158d00017118ac","158d0001a2eb66","158d0001f35b90","158d0001e52516"]
}

Tested devices (models):

  • gateway
  • sensor_ht
  • motion
  • sensor_motion.aq2
  • sensor_wleak.aq1
  • magnet
  • switch
  • 86sw1
  • 86sw2
  • cube
  • ctrl_neutral1
  • ctrl_neutral2
  • ctrl_ln1.aq1
  • smoke

Note: Untested devices using the same format will also send a payload.

Node-RED examples

basic

node-red-ex1

write gateway

node-red-ex2

Flow:

[{"id":"9339669d.8e38b8","type":"mqtt out","z":"d0877ed4.9e0cc","name":"","topic":"xiaomi/to/write","qos":"","retain":"","broker":"325f5be5.555734","x":560,"y":480,"wires":[]},{"id":"c508a302.61467","type":"ui_colour_picker","z":"d0877ed4.9e0cc","name":"","label":"gateway color","group":"4d5fcade.c527d4","format":"hex","outformat":"string","showSwatch":true,"showPicker":false,"showValue":true,"showAlpha":false,"showLightness":true,"dynOutput":"false","order":0,"width":0,"height":0,"passthru":true,"topic":"","x":220,"y":480,"wires":[["dcd9ac95.fd93"]]},{"id":"dcd9ac95.fd93","type":"template","z":"d0877ed4.9e0cc","name":"map","field":"payload","fieldType":"msg","format":"handlebars","syntax":"mustache","template":"{\n    \"cmd\": \"write\",\n    \"model\": \"gateway\",\n    \"sid\": \"fff...\",\n    \"data\": {\n        \"rgb\": \"10{{payload}}\"\n    }\n}","output":"json","x":390,"y":480,"wires":[["9339669d.8e38b8"]]},{"id":"325f5be5.555734","type":"mqtt-broker","z":"","broker":"127.0.0.1","port":"1883","clientid":"","usetls":false,"compatmode":false,"keepalive":"60","cleansession":true,"willTopic":"","willQos":"0","willPayload":"","birthTopic":"","birthQos":"0","birthPayload":""},{"id":"4d5fcade.c527d4","type":"ui_group","z":"","name":"Xiaomi","tab":"f3d46e49.beaec","order":1,"disp":true,"width":"6"},{"id":"f3d46e49.beaec","type":"ui_tab","z":"","name":"Main","icon":"dashboard","order":1}]

node-red-ex3

Flow:

[{"id":"aacbdba0.0519f8","type":"inject","z":"d0877ed4.9e0cc","name":"doorbell","topic":"","payload":"{\"cmd\":\"write\",\"model\":\"gateway\",\"sid\":\"fff...\",\"short_id\":0,\"key\":\"8\",\"data\":{\"mid\":10}}","payloadType":"json","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":120,"y":580,"wires":[["83a2b4f.eb0d748"]]},{"id":"8f56c43e.16c048","type":"inject","z":"d0877ed4.9e0cc","name":"police","topic":"","payload":"{\"cmd\":\"write\",\"model\":\"gateway\",\"sid\":\"fff...\",\"short_id\":0,\"key\":\"8\",\"data\":{\"mid\":1}}","payloadType":"json","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":110,"y":620,"wires":[["83a2b4f.eb0d748"]]},{"id":"83a2b4f.eb0d748","type":"mqtt out","z":"d0877ed4.9e0cc","name":"","topic":"xiaomi/to/write","qos":"","retain":"","broker":"325f5be5.555734","x":340,"y":580,"wires":[]},{"id":"325f5be5.555734","type":"mqtt-broker","z":"","broker":"192.168.0.35","port":"1883","clientid":"","usetls":false,"compatmode":false,"keepalive":"60","cleansession":true,"willTopic":"","willQos":"0","willPayload":"","birthTopic":"","birthQos":"0","birthPayload":""}]

About

A Bridge between the Xiaomi Mi Smart Home Gateway and the Mqtt broker.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published