Skip to content

chimera-linux/turnstile

Repository files navigation

turnstile

Turnstile is a work in progress effort to create a session/login tracker to serve as a fully featured alternative to the logind subproject from systemd, and to provide a neutral API to both our session tracker and to logind itself.

It is:

  • a session/login tracker
  • a service-manager-agnostic way to manage per-user service managers for user services

it is not:

  • a seat tracker (you want seatd for that)

it is not yet:

  • a library to examine session information

History

Its original name was dinit-userservd and it was created as a way to auto-spawn user instances of Dinit upon login and shut them down upon logout, to allow for clean management of user services.

Soon after it outgrew its original responsibilities and gained adjacent functionality such as handling of XDG_RUNTIME_DIR. At that point, it was decided that it would be worthwhile to expand the overall scope, as most of the effort was already there.

Purpose

Its ultimate goal is to provide a fully featured replacement for the logind component of systemd, solving the current status quo where logind is the de-facto standard, but at the same time very much tied to systemd.

While there are workarounds such as elogind, these are far from ideal. For instance, elogind is just a stubbed out version of upstream logind, and only provides the bare minimum, so systems using it are left without support for user services and other useful functionality.

This goal has not yet been accomplished, as at the moment Turnstile is only a daemon and does not provide any API. This will change in the future. This API will provide a way to access the session information, but will not deal with seat management. You will be able to use the library together with libseat without conflicting. The API will expose the bare minimum needed for the two libraries to interoperate.

Turnstile is designed to not care about what service manager it is used with. None of the daemon code cares, instead leaving this to separate backends.

Backends

Turnstile is capable of supporting multiple service managers, and the code makes no assumptions about what service manager one is using to handle user instances.

That said, right now the only available backend is for Dinit, which also serves as an example for implementation of other backends. There is also the built-in none backend, which does not handle user services at all and lets the daemon do only session tracking and auxiliary tasks. The used backend is configured in turnstiled.conf.

A backend is a very trivial shell script. Its responsibility is to launch the service manager and ensure that the daemon is notified of its readiness, which is handled with a special file descriptor.

How it works

There are three parts.

  1. The daemon, turnstiled.
  2. The PAM module, pam_turnstile.so.
  3. The chosen backend.

The daemon needs to be running in some way. Usually you will spawn it as a system-wide service. It needs to be running as the superuser. The daemon is what keeps track of the session state, and what launches the user service manager through the backend.

The PAM module needs to be in your login path. This will differ per-distro, but typically it will involve a line like this:

session optional pam_turnstile.so

When the daemon starts, it opens a Unix domain socket. This is where it listens for connections. When a user tries to log in, the PAM module will open one such connection and communicate the information to the daemon using a custom internal protocol.

Once the handshake is done and all the state is properly negotiated, the daemon will try to spawn the service manager for the user. It does so through the backend, which is tasked with the run action.

The backend is a little helper program that can be written in any language, it can e.g. be a shell script. It is started with a clean environment with many of the common environment variables, such as HOME, USER, LOGNAME, SHELL, PATH and others, freshly initialized. Typically it is expected to source the system /etc/profile for /bin/sh. Additionally, it runs within a PAM session (without authentication), which persists for the lifetime of the login, so PAM environment, resource limits and so on are also set up. It may also be a good idea to put pam_elogind or pam_systemd in there in order to have logind recognize the turnstile user session as a session (which allows it to be tracked by things using it, e.g. polkitd).

Note that if you use pam_systemd or pam_elogind in turnstiled PAM script to register it as a session, it will be treated as a session without a seat. That means things like polkit may treat anything running within turnstile as a non-local session, and may not authenticate the processes. There is no way to get around this limitation outside of patching polkit, see Chimera's patches for reference. The alternative is not registering it at all, which will not make polkit work, as the session tracking logic in it will not be able to assign the processes to any UID and things will not work either. Systemd user services are treated specially by systemd, as they are recognized by the service manager, but are explicitly not considered to be a part of any session (as they are shared); that means polkit will fall back to looking up whether any seated session for the UID exists.

After performing some initial preparation (which is backend-specific), the backend will simply replace itself with the desired service manager. There is a special file descriptor that is passed to the backend. The service manager (or possibly even the backend itself) can write a string of data in there when it's ready enough to accept outside commands.

Once that has happened, the daemon will invoke the backend once more, this time with the ready action and as a regular (non-login) shell script, without any special environment setup. It passes the previously received string as an argument. The backend then has the responsibility to wait as long as it takes (or until a timeout is reached) for the initial user services to start up.

Afterwards, the daemon will send a message back to the PAM module, allowing the login to proceed. This ensures that by the time the user gets their login terminal, the autostarted user services are already up.

When the user logs out (or rather, when the last login of the user has logged out), this service manager will shut down by default. However, it can also be configured to linger.

Auxiliary tasks

The daemon can also perform various adjacent tasks. As it can be configured through turnstiled.conf, many of these can be enabled or disabled as needed.

Rundir management

The environment variable XDG_RUNTIME_DIR is by default set in the user's login environment. Typically it is something like /run/user/$UID.

Turnstile can also create this directory. Whether it creates it by default comes down to how the build is configured. Environments using stock logind will want to keep it off in order to avoid conflicting, while others may want to turn it on.

Regardless of the default behavior, it can be altered in the configuration file.

Session persistence

It is possible to configure the sessions to linger, so the user services will remain up even after logout. This can be done either per-user, or globally.

Note that session persistence relies on rundir creation being enabled, as in the other case the daemon cannot know whether the other management solution is not deleting the rundir, and many user services rely on its existence. This can be manually overridden with an environment variable, at your own risk.

D-Bus session bus address

By default, the address of the D-Bus session bus will be exported into the login environment and set to something like unix:path=$XDG_RUNTIME_DIR/bus, if that socket exists and is valid in that path.

This allows the D-Bus session bus to be managed as a user service, to get systemd-style behavior with a single session bus shared between user logins. It can be explicitly disabled if necessary, but mostly there is no need to as the variable will not be exported if the bus does not exist there.

Note that this does not mean the bus address is exported into the activation environment, as turnstile does not know about it. The user service that spawns the session bus needs to take care of that, e.g. with dinitctl setenv for Dinit. Only this way will other user services know about the session bus.

Setup

Build and install the project. It uses Meson and follows the standard Meson workflow. Example:

$ mkdir build && cd build
$ meson .. --prefix=/usr
$ ninja all
$ sudo ninja install

The dependencies are:

  1. A POSIX-compliant OS (Chimera Linux is the reference platform)
  2. A C++17 compiler
  3. Meson and Ninja (to build)
  4. PAM

The Dinit backend requires at least Dinit 0.16 or newer, older versions will not work. The project also installs an example Dinit service for starting the daemon.

Support for other service managers

If you write a new backend or other functionality related to other service managers, it would be appreciated if you could submit it upstream (i.e. here). This way we can ensure that other backends stay aligned with the upstream design goals and will not break over time.

Additionally, you can get review here, which should ultimately result in more consistent and better quality code. Turnstile is specifically designed to help distro interoperability.

Support for other operating systems (such as the BSDs) is also welcome. While the project tries to be portable, it is being tested solely on Linux. Therefore, testing on other operating systems and potential fixes (please send patches) are very helpful. Ultimately I would like the project to serve as a vendor-neutral interface on all Unix-like systems, so that desktop environments and other projects have a quality baseline to target.