[Cleanup] Quantum Painter (qmk#19825)

Co-authored-by: Nick Brassel <[email protected]>

drivers/painter/comms/qp_comms_spi.c

@@ -10,8 +10,8 @@
 // Base SPI support
 
 bool qp_comms_spi_init(painter_device_t device) {
-    struct painter_driver_t *     driver       = (struct painter_driver_t *)device;
-    struct qp_comms_spi_config_t *comms_config = (struct qp_comms_spi_config_t *)driver->comms_config;
+    painter_driver_t *     driver       = (painter_driver_t *)device;
+    qp_comms_spi_config_t *comms_config = (qp_comms_spi_config_t *)driver->comms_config;
 
     // Initialize the SPI peripheral
     spi_init();
@@ -24,17 +24,19 @@ bool qp_comms_spi_init(painter_device_t device) {
 }
 
 bool qp_comms_spi_start(painter_device_t device) {
-    struct painter_driver_t *     driver       = (struct painter_driver_t *)device;
-    struct qp_comms_spi_config_t *comms_config = (struct qp_comms_spi_config_t *)driver->comms_config;
+    painter_driver_t *     driver       = (painter_driver_t *)device;
+    qp_comms_spi_config_t *comms_config = (qp_comms_spi_config_t *)driver->comms_config;
 
     return spi_start(comms_config->chip_select_pin, comms_config->lsb_first, comms_config->mode, comms_config->divisor);
 }
 
 uint32_t qp_comms_spi_send_data(painter_device_t device, const void *data, uint32_t byte_count) {
     uint32_t       bytes_remaining = byte_count;
     const uint8_t *p               = (const uint8_t *)data;
+    const uint32_t max_msg_length  = 1024;
+
     while (bytes_remaining > 0) {
-        uint32_t bytes_this_loop = bytes_remaining < 1024 ? bytes_remaining : 1024;
+        uint32_t bytes_this_loop = QP_MIN(bytes_remaining, max_msg_length);
         spi_transmit(p, bytes_this_loop);
         p += bytes_this_loop;
         bytes_remaining -= bytes_this_loop;
@@ -44,13 +46,13 @@ uint32_t qp_comms_spi_send_data(painter_device_t device, const void *data, uint3
 }
 
 void qp_comms_spi_stop(painter_device_t device) {
-    struct painter_driver_t *     driver       = (struct painter_driver_t *)device;
-    struct qp_comms_spi_config_t *comms_config = (struct qp_comms_spi_config_t *)driver->comms_config;
+    painter_driver_t *     driver       = (painter_driver_t *)device;
+    qp_comms_spi_config_t *comms_config = (qp_comms_spi_config_t *)driver->comms_config;
     spi_stop();
     writePinHigh(comms_config->chip_select_pin);
 }
 
-const struct painter_comms_vtable_t spi_comms_vtable = {
+const painter_comms_vtable_t spi_comms_vtable = {
     .comms_init  = qp_comms_spi_init,
     .comms_start = qp_comms_spi_start,
     .comms_send  = qp_comms_spi_send_data,
@@ -67,8 +69,8 @@ bool qp_comms_spi_dc_reset_init(painter_device_t device) {
         return false;
     }
 
-    struct painter_driver_t *              driver       = (struct painter_driver_t *)device;
-    struct qp_comms_spi_dc_reset_config_t *comms_config = (struct qp_comms_spi_dc_reset_config_t *)driver->comms_config;
+    painter_driver_t *              driver       = (painter_driver_t *)device;
+    qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
 
     // Set up D/C as output low, if specified
     if (comms_config->dc_pin != NO_PIN) {
@@ -89,15 +91,15 @@ bool qp_comms_spi_dc_reset_init(painter_device_t device) {
 }
 
 uint32_t qp_comms_spi_dc_reset_send_data(painter_device_t device, const void *data, uint32_t byte_count) {
-    struct painter_driver_t *              driver       = (struct painter_driver_t *)device;
-    struct qp_comms_spi_dc_reset_config_t *comms_config = (struct qp_comms_spi_dc_reset_config_t *)driver->comms_config;
+    painter_driver_t *              driver       = (painter_driver_t *)device;
+    qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
     writePinHigh(comms_config->dc_pin);
     return qp_comms_spi_send_data(device, data, byte_count);
 }
 
 void qp_comms_spi_dc_reset_send_command(painter_device_t device, uint8_t cmd) {
-    struct painter_driver_t *              driver       = (struct painter_driver_t *)device;
-    struct qp_comms_spi_dc_reset_config_t *comms_config = (struct qp_comms_spi_dc_reset_config_t *)driver->comms_config;
+    painter_driver_t *              driver       = (painter_driver_t *)device;
+    qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
     writePinLow(comms_config->dc_pin);
     spi_write(cmd);
 }
@@ -118,7 +120,7 @@ void qp_comms_spi_dc_reset_bulk_command_sequence(painter_device_t device, const
     }
 }
 
-const struct painter_comms_with_command_vtable_t spi_comms_with_dc_vtable = {
+const painter_comms_with_command_vtable_t spi_comms_with_dc_vtable = {
     .base =
         {
             .comms_init  = qp_comms_spi_dc_reset_init,

drivers/painter/comms/qp_comms_spi.h

@@ -13,36 +13,36 @@
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 // Base SPI support
 
-struct qp_comms_spi_config_t {
+typedef struct qp_comms_spi_config_t {
     pin_t    chip_select_pin;
     uint16_t divisor;
     bool     lsb_first;
     int8_t   mode;
-};
+} qp_comms_spi_config_t;
 
 bool     qp_comms_spi_init(painter_device_t device);
 bool     qp_comms_spi_start(painter_device_t device);
 uint32_t qp_comms_spi_send_data(painter_device_t device, const void* data, uint32_t byte_count);
 void     qp_comms_spi_stop(painter_device_t device);
 
-extern const struct painter_comms_vtable_t spi_comms_vtable;
+extern const painter_comms_vtable_t spi_comms_vtable;
 
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 // SPI with D/C and RST pins
 
 #    ifdef QUANTUM_PAINTER_SPI_DC_RESET_ENABLE
 
-struct qp_comms_spi_dc_reset_config_t {
-    struct qp_comms_spi_config_t spi_config;
-    pin_t                        dc_pin;
-    pin_t                        reset_pin;
-};
+typedef struct qp_comms_spi_dc_reset_config_t {
+    qp_comms_spi_config_t spi_config;
+    pin_t                 dc_pin;
+    pin_t                 reset_pin;
+} qp_comms_spi_dc_reset_config_t;
 
 void     qp_comms_spi_dc_reset_send_command(painter_device_t device, uint8_t cmd);
 uint32_t qp_comms_spi_dc_reset_send_data(painter_device_t device, const void* data, uint32_t byte_count);
 void     qp_comms_spi_dc_reset_bulk_command_sequence(painter_device_t device, const uint8_t* sequence, size_t sequence_len);
 
-extern const struct painter_comms_with_command_vtable_t spi_comms_with_dc_vtable;
+extern const painter_comms_with_command_vtable_t spi_comms_with_dc_vtable;
 
 #    endif // QUANTUM_PAINTER_SPI_DC_RESET_ENABLE
 

drivers/painter/gc9a01/qp_gc9a01.c

@@ -94,7 +94,7 @@ __attribute__((weak)) bool qp_gc9a01_init(painter_device_t device, painter_rotat
 // Driver vtable
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 
-const struct tft_panel_dc_reset_painter_driver_vtable_t gc9a01_driver_vtable = {
+const tft_panel_dc_reset_painter_driver_vtable_t gc9a01_driver_vtable = {
     .base =
         {
             .init            = qp_gc9a01_init,
@@ -125,8 +125,8 @@ painter_device_t qp_gc9a01_make_spi_device(uint16_t panel_width, uint16_t panel_
     for (uint32_t i = 0; i < GC9A01_NUM_DEVICES; ++i) {
         tft_panel_dc_reset_painter_device_t *driver = &gc9a01_drivers[i];
         if (!driver->base.driver_vtable) {
-            driver->base.driver_vtable         = (const struct painter_driver_vtable_t *)&gc9a01_driver_vtable;
-            driver->base.comms_vtable          = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
+            driver->base.driver_vtable         = (const painter_driver_vtable_t *)&gc9a01_driver_vtable;
+            driver->base.comms_vtable          = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
             driver->base.native_bits_per_pixel = 16; // RGB565
             driver->base.panel_width           = panel_width;
             driver->base.panel_height          = panel_height;

drivers/painter/generic/qp_rgb565_surface.c

@@ -9,7 +9,7 @@
 
 // Device definition
 typedef struct rgb565_surface_painter_device_t {
-    struct painter_driver_t base; // must be first, so it can be cast to/from the painter_device_t* type
+    painter_driver_t base; // must be first, so it can be cast to/from the painter_device_t* type
 
     // The target buffer
     uint16_t *buffer;
@@ -95,7 +95,7 @@ static inline void stream_pixdata(rgb565_surface_painter_device_t *surface, cons
 // Driver vtable
 
 static bool qp_rgb565_surface_init(painter_device_t device, painter_rotation_t rotation) {
-    struct painter_driver_t *        driver  = (struct painter_driver_t *)device;
+    painter_driver_t *               driver  = (painter_driver_t *)device;
     rgb565_surface_painter_device_t *surface = (rgb565_surface_painter_device_t *)driver;
     memset(surface->buffer, 0, driver->panel_width * driver->panel_height * driver->native_bits_per_pixel / 8);
     return true;
@@ -107,13 +107,13 @@ static bool qp_rgb565_surface_power(painter_device_t device, bool power_on) {
 }
 
 static bool qp_rgb565_surface_clear(painter_device_t device) {
-    struct painter_driver_t *driver = (struct painter_driver_t *)device;
+    painter_driver_t *driver = (painter_driver_t *)device;
     driver->driver_vtable->init(device, driver->rotation); // Re-init the surface
     return true;
 }
 
 static bool qp_rgb565_surface_flush(painter_device_t device) {
-    struct painter_driver_t *        driver  = (struct painter_driver_t *)device;
+    painter_driver_t *               driver  = (painter_driver_t *)device;
     rgb565_surface_painter_device_t *surface = (rgb565_surface_painter_device_t *)driver;
     surface->dirty_l = surface->dirty_t = UINT16_MAX;
     surface->dirty_r = surface->dirty_b = 0;
@@ -122,7 +122,7 @@ static bool qp_rgb565_surface_flush(painter_device_t device) {
 }
 
 static bool qp_rgb565_surface_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) {
-    struct painter_driver_t *        driver  = (struct painter_driver_t *)device;
+    painter_driver_t *               driver  = (painter_driver_t *)device;
     rgb565_surface_painter_device_t *surface = (rgb565_surface_painter_device_t *)driver;
 
     // Set the viewport locations
@@ -139,7 +139,7 @@ static bool qp_rgb565_surface_viewport(painter_device_t device, uint16_t left, u
 
 // Stream pixel data to the current write position in GRAM
 static bool qp_rgb565_surface_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count) {
-    struct painter_driver_t *        driver  = (struct painter_driver_t *)device;
+    painter_driver_t *               driver  = (painter_driver_t *)device;
     rgb565_surface_painter_device_t *surface = (rgb565_surface_painter_device_t *)driver;
     stream_pixdata(surface, (const uint16_t *)pixel_data, native_pixel_count);
     return true;
@@ -170,7 +170,7 @@ static bool qp_rgb565_surface_append_pixdata(painter_device_t device, uint8_t *t
     return true;
 }
 
-const struct painter_driver_vtable_t rgb565_surface_driver_vtable = {
+const painter_driver_vtable_t rgb565_surface_driver_vtable = {
     .init            = qp_rgb565_surface_init,
     .power           = qp_rgb565_surface_power,
     .clear           = qp_rgb565_surface_clear,
@@ -201,7 +201,7 @@ uint32_t qp_rgb565_surface_comms_send(painter_device_t device, const void *data,
     return byte_count;
 }
 
-struct painter_comms_vtable_t rgb565_surface_driver_comms_vtable = {
+painter_comms_vtable_t rgb565_surface_driver_comms_vtable = {
     // These are all effective no-op's because they're not actually needed.
     .comms_init  = qp_rgb565_surface_comms_init,
     .comms_start = qp_rgb565_surface_comms_start,
@@ -234,7 +234,7 @@ painter_device_t qp_rgb565_make_surface(uint16_t panel_width, uint16_t panel_hei
 // Drawing routine to copy out the dirty region and send it to another device
 
 bool qp_rgb565_surface_draw(painter_device_t surface, painter_device_t display, uint16_t x, uint16_t y) {
-    struct painter_driver_t *        surface_driver = (struct painter_driver_t *)surface;
+    painter_driver_t *               surface_driver = (painter_driver_t *)surface;
     rgb565_surface_painter_device_t *surface_handle = (rgb565_surface_painter_device_t *)surface_driver;
 
     // If we're not dirty... we're done.

drivers/painter/ili9xxx/qp_ili9163.c

@@ -58,7 +58,7 @@ __attribute__((weak)) bool qp_ili9163_init(painter_device_t device, painter_rota
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 // Driver vtable
 
-const struct tft_panel_dc_reset_painter_driver_vtable_t ili9163_driver_vtable = {
+const tft_panel_dc_reset_painter_driver_vtable_t ili9163_driver_vtable = {
     .base =
         {
             .init            = qp_ili9163_init,
@@ -93,8 +93,8 @@ painter_device_t qp_ili9163_make_spi_device(uint16_t panel_width, uint16_t panel
     for (uint32_t i = 0; i < ILI9163_NUM_DEVICES; ++i) {
         tft_panel_dc_reset_painter_device_t *driver = &ili9163_drivers[i];
         if (!driver->base.driver_vtable) {
-            driver->base.driver_vtable         = (const struct painter_driver_vtable_t *)&ili9163_driver_vtable;
-            driver->base.comms_vtable          = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
+            driver->base.driver_vtable         = (const painter_driver_vtable_t *)&ili9163_driver_vtable;
+            driver->base.comms_vtable          = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
             driver->base.panel_width           = panel_width;
             driver->base.panel_height          = panel_height;
             driver->base.rotation              = QP_ROTATION_0;

drivers/painter/ili9xxx/qp_ili9341.c

@@ -65,7 +65,7 @@ __attribute__((weak)) bool qp_ili9341_init(painter_device_t device, painter_rota
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 // Driver vtable
 
-const struct tft_panel_dc_reset_painter_driver_vtable_t ili9341_driver_vtable = {
+const tft_panel_dc_reset_painter_driver_vtable_t ili9341_driver_vtable = {
     .base =
         {
             .init            = qp_ili9341_init,
@@ -100,8 +100,8 @@ painter_device_t qp_ili9341_make_spi_device(uint16_t panel_width, uint16_t panel
     for (uint32_t i = 0; i < ILI9341_NUM_DEVICES; ++i) {
         tft_panel_dc_reset_painter_device_t *driver = &ili9341_drivers[i];
         if (!driver->base.driver_vtable) {
-            driver->base.driver_vtable         = (const struct painter_driver_vtable_t *)&ili9341_driver_vtable;
-            driver->base.comms_vtable          = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
+            driver->base.driver_vtable         = (const painter_driver_vtable_t *)&ili9341_driver_vtable;
+            driver->base.comms_vtable          = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
             driver->base.native_bits_per_pixel = 16; // RGB565
             driver->base.panel_width           = panel_width;
             driver->base.panel_height          = panel_height;

drivers/painter/ili9xxx/qp_ili9488.c

@@ -58,7 +58,7 @@ __attribute__((weak)) bool qp_ili9488_init(painter_device_t device, painter_rota
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 // Driver vtable
 
-const struct tft_panel_dc_reset_painter_driver_vtable_t ili9488_driver_vtable = {
+const tft_panel_dc_reset_painter_driver_vtable_t ili9488_driver_vtable = {
     .base =
         {
             .init            = qp_ili9488_init,
@@ -93,8 +93,8 @@ painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel
     for (uint32_t i = 0; i < ILI9488_NUM_DEVICES; ++i) {
         tft_panel_dc_reset_painter_device_t *driver = &ili9488_drivers[i];
         if (!driver->base.driver_vtable) {
-            driver->base.driver_vtable         = (const struct painter_driver_vtable_t *)&ili9488_driver_vtable;
-            driver->base.comms_vtable          = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
+            driver->base.driver_vtable         = (const painter_driver_vtable_t *)&ili9488_driver_vtable;
+            driver->base.comms_vtable          = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
             driver->base.native_bits_per_pixel = 24; // RGB888
             driver->base.panel_width           = panel_width;
             driver->base.panel_height          = panel_height;

drivers/painter/ssd1351/qp_ssd1351.c

@@ -62,7 +62,7 @@ __attribute__((weak)) bool qp_ssd1351_init(painter_device_t device, painter_rota
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 // Driver vtable
 
-const struct tft_panel_dc_reset_painter_driver_vtable_t ssd1351_driver_vtable = {
+const tft_panel_dc_reset_painter_driver_vtable_t ssd1351_driver_vtable = {
     .base =
         {
             .init            = qp_ssd1351_init,
@@ -97,8 +97,8 @@ painter_device_t qp_ssd1351_make_spi_device(uint16_t panel_width, uint16_t panel
     for (uint32_t i = 0; i < SSD1351_NUM_DEVICES; ++i) {
         tft_panel_dc_reset_painter_device_t *driver = &ssd1351_drivers[i];
         if (!driver->base.driver_vtable) {
-            driver->base.driver_vtable         = (const struct painter_driver_vtable_t *)&ssd1351_driver_vtable;
-            driver->base.comms_vtable          = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
+            driver->base.driver_vtable         = (const painter_driver_vtable_t *)&ssd1351_driver_vtable;
+            driver->base.comms_vtable          = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
             driver->base.panel_width           = panel_width;
             driver->base.panel_height          = panel_height;
             driver->base.rotation              = QP_ROTATION_0;

drivers/painter/st77xx/qp_st7735.c

@@ -25,7 +25,7 @@ tft_panel_dc_reset_painter_device_t st7735_drivers[ST7735_NUM_DEVICES] = {0};
 
 #ifndef ST7735_NO_AUTOMATIC_OFFSETS
 static inline void st7735_automatic_viewport_offsets(painter_device_t device, painter_rotation_t rotation) {
-    struct painter_driver_t *driver = (struct painter_driver_t *)device;
+    painter_driver_t *driver = (painter_driver_t *)device;
 
     // clang-format off
     const struct {
@@ -82,7 +82,7 @@ __attribute__((weak)) bool qp_st7735_init(painter_device_t device, painter_rotat
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 // Driver vtable
 
-const struct tft_panel_dc_reset_painter_driver_vtable_t st7735_driver_vtable = {
+const tft_panel_dc_reset_painter_driver_vtable_t st7735_driver_vtable = {
     .base =
         {
             .init            = qp_st7735_init,
@@ -117,8 +117,8 @@ painter_device_t qp_st7735_make_spi_device(uint16_t panel_width, uint16_t panel_
     for (uint32_t i = 0; i < ST7735_NUM_DEVICES; ++i) {
         tft_panel_dc_reset_painter_device_t *driver = &st7735_drivers[i];
         if (!driver->base.driver_vtable) {
-            driver->base.driver_vtable         = (const struct painter_driver_vtable_t *)&st7735_driver_vtable;
-            driver->base.comms_vtable          = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
+            driver->base.driver_vtable         = (const painter_driver_vtable_t *)&st7735_driver_vtable;
+            driver->base.comms_vtable          = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
             driver->base.panel_width           = panel_width;
             driver->base.panel_height          = panel_height;
             driver->base.rotation              = QP_ROTATION_0;