-
Notifications
You must be signed in to change notification settings - Fork 54
Tutorial
This page describes how to install a Raspbian image containing the Comitup package - the preferred method for installing Comitup. It is also possible to install the package on an existing environment.
The host device will need a web browser and a Secure Shell (SSH) application. For some operating systems, a Zeroconf Browser is helpful. Refer to the table.
| OS | SSH | ZeroConf Browser |
|---|---|---|
| Windows | Putty | Bonjour Browser |
| Mac | (included) | (not required) |
| Linux | (included) | avahi-discover (not required) |
| IOS | Termius | (not required) |
| Android | JuiceSSH | he.net - Network Tools (optional) |
Comitup is primarily intended for Raspberry Pi models with built-in Wifi. Otherwise, you will need to take some care in selecting the Wifi Adapter.
Find the link on the Comitup Home Page for the download links. You may want a Bittorrent Client for the download.
Once the image is downloaded, use an unzip utility to restore the original image.
The microSD card must be larger than 4GB (except for the 'lite' image).
For Windows, this is covered in the Raspberry Pi Quick Start Guide, steps 3 & 4.
The Raspberry Pi Website has copying instructions for Linux, Mac OS, and Windows.
Insert the microSD card into the Raspberry Pi, and apply power. The first boot will take a couple of minutes, while the system makes some initial configuration changes.
Using a Wifi-enabled computer, smart phone, or tablet, view a list of available Wifi Access Points. You should see one named 'comitup-' followed by a number of digits (remember this number). Connect to this Hotspot.
If all you want to do is connect with the Pi, you are done at this point. Connect via ssh to [email protected] or comitup@comitup-<nnn>.local, or to [email protected] (where "comitup" is the default user on the Comitup Image).
If you want your Pi and workstation to also have connectivity to the Internet, continue to the next step.
If your OS supports captive portal detection, you will be automatically prompted by a web page to select an upstream Access Point. Such detection is supported by Android and IOS/Mac, and by Firefox on other operating systems.
Otherwise, while connected to the Comitup Access Point, browse to http://comitup-nnn.local (using the digits from earlier) or to 'http://raspberrypi.local'. If you are using an operating system that does not understand these '.local' addresses, you can cheat and use http://10.41.0.1.
You should see a list of available Access Points. Select one, enter a password if necessary, and click on 'Connect'.
Connect your computer/phone/tablet to the same Access Point. Use SSH to open a terminal session to [email protected], or to pi@comitup-<nnn>.local, where <nnn> is the digits from the access point earlier. If the name is not recognized, use a Zeroconf Browser to identify the Raspberry Pi IP address.
A good first step at this point is to update your operating system to the latest packages:
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
The default password for the "comitup" user is "comitup". Be sure to change it once you have logged in:
passwd
Your Pi will remember the WiFi configuration, and will automatically connect the next time you boot. If you configure it for multiple AP's/locations, it will find the correct AP and connect.
Enjoy!