Skip to content

david-cermak/ADuCM-Bootloader

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ADuCM-Bootloader

Simple bootcode for ADuCM360

Interface

Bootloading protocol complies with Cortex-M3 Based ADuCxxx Serial Download Protocol (based on AN-1160 by Analog Devices). It could use UART0 on P0.1 & P0.2 as on ADUCINO board or RS485 on UART P0.6 & P0.7 with P0.5 for direction control (#define ADUCINO_UART). In case of RS485 it uses sequences to distinguish that a message started (feature could be disabled with #define DISABLE_RS485_SENTINELS) Baud rate is fixed on 115200 (but can be easily changed in the code).

Flash layout

Adresses 0 - 0x1800 are reserved for bootloader, the rest is for application. Application descriptors are stored in page starting 0x1000, in 3 words:

  • magic number (0xBEA70001)
  • app start address (taken from init vector app locates at 0x0004)
  • app flash end (taken from address 0x1008)

Application and bootloader shares a jump table located at fixed address 0x1000 with application section of flash.

Application requirements

Application has to define the following sections

  • cortex vectors from address 0x0
    • the only useful record is 0x0004 where bootloader finds app entry address to place into 0x1000 app descriptor field
    • other records are useful for debugging without bootloader
    • interrupt handlers should point to the 0x1800 jump table, where jump instruction with real hanlder address are located
  • application descriptors at 0x1000
    • bootloader finds here application end address -> so bootloader can update app descriptors after entire flash is correctly written
  • jump table from 0x1200
    • jump intructions to real handlers -> so bootloader does not have to delete standard vectors at 0x0 to avoid unpredictable behaviour if flash not correctly or entirely written
  • normal application code after jump table (after 0x1000...)

About

Simple bootcode for ADuCM360

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published