【deepin_V23_beta3】【一般】【正常】【发散测试】【内核】【6.5.4】HUAWEI HKD-WXX (C233) Notebook(绿壳笔记本)重启设备后黑屏，需硬启动才能正常使用 #29
Comments
kobe337
changed the title
Avenger-285714
pushed a commit
to Avenger-285714/DeepinKernel
that referenced
this issue
May 5, 2024
[ Upstream commit 743edc8 ] As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b deepin-community#29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Alexander Zubkov <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/cc17eed86b41dd829d39b07906fec074a9ce580e.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Avenger-285714
pushed a commit
that referenced
this issue
May 5, 2024
[ Upstream commit 743edc8 ] As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Alexander Zubkov <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/cc17eed86b41dd829d39b07906fec074a9ce580e.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Avenger-285714
pushed a commit
to Avenger-285714/DeepinKernel
that referenced
this issue
May 7, 2024
[ Upstream commit 743edc8 ] As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b deepin-community#29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Alexander Zubkov <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/cc17eed86b41dd829d39b07906fec074a9ce580e.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
xzl01
pushed a commit
that referenced
this issue
May 7, 2024
[ Upstream commit 743edc8 ] As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Alexander Zubkov <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/cc17eed86b41dd829d39b07906fec074a9ce580e.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
MingcongBai
pushed a commit
to MingcongBai/deepin-kernel
that referenced
this issue
Jun 3, 2024
cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark() resulting in the following sanitizer report: UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask [64][1]' CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 deepin-community#29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) ubsan_epilogue (lib/ubsan.c:232) __ubsan_handle_out_of_bounds (lib/ubsan.c:429) cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline] do_map_benchmark (kernel/dma/map_benchmark.c:104) map_benchmark_ioctl (kernel/dma/map_benchmark.c:246) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Use cpumask_of_node() in place when binding a kernel thread to a cpuset of a particular node. Note that the provided node id is checked inside map_benchmark_ioctl(). It's just a NUMA_NO_NODE case which is not handled properly later. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789da ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <[email protected]> Acked-by: Barry Song <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
MingcongBai
pushed a commit
to MingcongBai/deepin-kernel
that referenced
this issue
Jun 3, 2024
[ Upstream commit 36ac9e7 ] Reinitialize the whole EST structure would also reset the mutex lock which is embedded in the EST structure, and then trigger the following warning. To address this, move the lock to struct stmmac_priv. We also need to reacquire the mutex lock when doing this initialization. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068 Modules linked in: CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty deepin-community#29 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0xd84/0x1068 lr : __mutex_lock+0xd84/0x1068 sp : ffffffc0864e3570 x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003 x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000 x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8 x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698 x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027 x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: __mutex_lock+0xd84/0x1068 mutex_lock_nested+0x28/0x34 tc_setup_taprio+0x118/0x68c stmmac_setup_tc+0x50/0xf0 taprio_change+0x868/0xc9c Fixes: b2aae65 ("net: stmmac: add mutex lock to protect est parameters") Signed-off-by: Xiaolei Wang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Serge Semin <[email protected]> Reviewed-by: Andrew Halaney <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
MingcongBai
pushed a commit
to MingcongBai/deepin-kernel
that referenced
this issue
Jun 17, 2024
[ Upstream commit e64746e ] cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark() resulting in the following sanitizer report: UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask [64][1]' CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 deepin-community#29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) ubsan_epilogue (lib/ubsan.c:232) __ubsan_handle_out_of_bounds (lib/ubsan.c:429) cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline] do_map_benchmark (kernel/dma/map_benchmark.c:104) map_benchmark_ioctl (kernel/dma/map_benchmark.c:246) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Use cpumask_of_node() in place when binding a kernel thread to a cpuset of a particular node. Note that the provided node id is checked inside map_benchmark_ioctl(). It's just a NUMA_NO_NODE case which is not handled properly later. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789da ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <[email protected]> Acked-by: Barry Song <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Avenger-285714
pushed a commit
to Avenger-285714/DeepinKernel
that referenced
this issue
Jun 21, 2024
[ Upstream commit e64746e ] cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark() resulting in the following sanitizer report: UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask [64][1]' CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 deepin-community#29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) ubsan_epilogue (lib/ubsan.c:232) __ubsan_handle_out_of_bounds (lib/ubsan.c:429) cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline] do_map_benchmark (kernel/dma/map_benchmark.c:104) map_benchmark_ioctl (kernel/dma/map_benchmark.c:246) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Use cpumask_of_node() in place when binding a kernel thread to a cpuset of a particular node. Note that the provided node id is checked inside map_benchmark_ioctl(). It's just a NUMA_NO_NODE case which is not handled properly later. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789da ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <[email protected]> Acked-by: Barry Song <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
opsiff
pushed a commit
to opsiff/UOS-kernel
that referenced
this issue
Jul 30, 2024
[ Upstream commit eef0532e900c20a6760da829e82dac3ee18688c5 ] Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 deepin-community#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 deepin-community#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 deepin-community#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 deepin-community#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 deepin-community#29/9 bpf_tcp_ca/update_ca:FAIL deepin-community#29 bpf_tcp_ca:FAIL Caught signal deepin-community#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 39ea0cee522a3452122536e092b78d2297258a4d)
opsiff
pushed a commit
to opsiff/UOS-kernel
that referenced
this issue
Aug 1, 2024
[ Upstream commit eef0532e900c20a6760da829e82dac3ee18688c5 ] Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 deepin-community#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 deepin-community#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 deepin-community#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 deepin-community#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 deepin-community#29/9 bpf_tcp_ca/update_ca:FAIL deepin-community#29 bpf_tcp_ca:FAIL Caught signal deepin-community#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit db2cae7643a13bdfbe9baeec71cb7b7df0f4b652)
opsiff
pushed a commit
to opsiff/UOS-kernel
that referenced
this issue
Aug 4, 2024
[ Upstream commit eef0532e900c20a6760da829e82dac3ee18688c5 ] Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 deepin-community#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 deepin-community#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 deepin-community#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 deepin-community#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 deepin-community#29/9 bpf_tcp_ca/update_ca:FAIL deepin-community#29 bpf_tcp_ca:FAIL Caught signal deepin-community#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 691ec7043122c9c8c46d84f6e6cd85d13d50cd93)
Avenger-285714
pushed a commit
that referenced
this issue
Aug 12, 2024
[ Upstream commit eef0532e900c20a6760da829e82dac3ee18688c5 ] Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 #29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 #29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 #29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 #29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 #29/9 bpf_tcp_ca/update_ca:FAIL #29 bpf_tcp_ca:FAIL Caught signal #11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 691ec7043122c9c8c46d84f6e6cd85d13d50cd93)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
SUMMARY | 问题概要
HUAWEI HKD-WXX (C233) Notebook(绿壳笔记本)重启设备后黑屏，需硬启动
SOFTWARE/OS VERSIONS | 软件/系统版本信息
PRE-REQUIREMENT | 预置条件
STEPS TO REPRODUCE | 复现步骤
OBSERVED RESULT | 观察到的结果
EXPECTED RESULT | 期望的结果
设备能够正常重启后，进入桌面登陆界面
ADDITIONAL INFORMATION | 额外补充
dmesg日志地址：file:///media/deepin/smbmounts/smb-share:server=10.20.64.70,share=share/6.5.4重启黑屏/
No response
The text was updated successfully, but these errors were encountered: