Vyper extended

This is a extended Vyper Klipper / Mainsail Config

This Files are only compatible together!

Watch my Youtube Videos to know how it works ;)

Link: https://www.youtube.com/watch?v=S_K7iB3jYMs&list=PLWqnUinimMN3Upj3a3BzVFsixutHB0ZP5

Discord: https://discord.gg/kBdeP3ZtCY

Timelapse Installation:

Connect via Putty to the pi and then do following commands:

cd ~/

git clone https://github.com/mainsail-crew/moonraker-timelapse.git

bash ~/moonraker-timelapse/install.sh

uncomment the #timelapse.cfg in the printer.cfg (3. Line) If you have some trouble to connect to Mainsail then use this command:

./scripts/install-moonraker.sh -r -f -c ~/klipper_config/moonraker.conf -l ~/klipper_logs/moonraker.log

Pressure Advance

https://www.klipper3d.org/Pressure_Advance.html

STL: https://www.klipper3d.org/prints/square_tower.stl

use the PA Profil in Superslicer

Input Shaping - uncomment the sections i showed in my video:

https://www.klipper3d.org/Measuring_Resonances.html

Shortlist Commands:

~/klippy-env/bin/pip install -v numpy

sudo apt update

sudo apt install python3-numpy python3-matplotlib

sudo reboot

cd ~/klipper/

sudo cp "./scripts/klipper-mcu-start.sh" /etc/init.d/klipper_mcu

sudo update-rc.d klipper_mcu defaults

sudo raspi-config            #enable SPI in interfacing options

sudo reboot

cd ~/klipper/

make menuconfig              #Microcontroller: Linux process

sudo service klipper stop

make flash

sudo service klipper start

sudo usermod -a -G tty pi

ACCELEROMETER_QUERY          #Testing the Sensor if there is a Invalid adxl then check the wireing or the offical klipper site

TEST_RESONANCES AXIS=X

TEST_RESONANCES AXIS=Y

To create the graph:

~/klipper/scripts/calibrate_shaper.py /tmp/resonances_x_*.csv -o /tmp/shaper_calibrate_x.png

~/klipper/scripts/calibrate_shaper.py /tmp/resonances_y_*.csv -o /tmp/shaper_calibrate_y.png

Max Accel

https://www.klipper3d.org/Resonance_Compensation.html#tuning

STL: https://www.klipper3d.org/prints/ringing_tower.stl

TUNING_TOWER COMMAND=SET_VELOCITY_LIMIT PARAMETER=ACCEL START=1250 FACTOR=100 BAND=5