Fix MarlinFirmware#3

dertester · Jun 15, 2020 · 0a4567d · 0a4567d
1 parent e6ae6dd
commit 0a4567d
Show file tree

Hide file tree

Showing 3 changed files with 5 additions and 4 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -862,6 +862,7 @@
  *
  */
 //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
+#define Z_MIN_PROBE_PIN                  P1_26
 
 /**
  * Probe Type

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -483,7 +483,7 @@
   #define CASE_LIGHT_PIN P0_28                 // Override the default pin if needed
   #define INVERT_CASE_LIGHT true             // Set true if Case Light is ON when pin is LOW
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
-  #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
+  #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255   // Set default power-up brightness (0-255, requires PWM pin)
   //#define CASE_LIGHT_MAX_PWM 128            // Limit pwm
   //#define CASE_LIGHT_MENU                   // Add Case Light options to the LCD menu
   //#define CASE_LIGHT_NO_BRIGHTNESS          // Disable brightness control. Enable for non-PWM lighting.
@@ -657,7 +657,7 @@
 
   // Safety: The probe needs time to recognize the command.
   //         Minimum command delay (ms). Enable and increase if needed.
-  //#define BLTOUCH_DELAY 500
+  #define BLTOUCH_DELAY 500
 
   /**
    * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
@@ -683,7 +683,7 @@
    * differs, a mode set eeprom write will be completed at initialization.
    * Use the option below to force an eeprom write to a V3.1 probe regardless.
    */
-  //#define BLTOUCH_SET_5V_MODE
+  #define BLTOUCH_SET_5V_MODE
 
   /**
    * Safety: Activate if connecting a probe with an unknown voltage mode.

diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
@@ -67,7 +67,7 @@
     #define Z_MIN_PIN                      P1_24  // Z+
   #endif
 #else
-  #define Z_MIN_PIN                        P1_26  // Z-
+  #define Z_MIN_PIN                        P1_25  // Z-
   #define Z_MAX_PIN                        P1_24  // Z+
 #endif