DJI camera control

[1afridi]

Hi there,
I want to control my DJI camera using API port or directly using an external NVIDIA Jetson or arduino or any other controller. Kindly give me guidance in this regard.

[dji-dev]

Public comment from Bruce Cheung in Zendesk ticket #32049:

Dear Customer,

Thank you for contacting DJI.

The DJI Onboard SDK supports embedded platforms such as STM32 and Linux (ubuntu16.04). About the use of SDK, environment setup and sample run, you can refer to https://developer.dji.com/onboard-sdk/documentation/introduction/homepage.html

In addition, the DJI Onboard SDK supports control the DJI camera (mounted on the vehicle) for photo and video. You can check out the following:
GUIDES, https://developer.dji.com/onboard-sdk/documentation/guides/component-guide-camera-and-gimbal.html
SAMPLE, https://developer.dji.com/onboard-sdk/documentation/sample-doc/camera-gimbal-control.html

Thank you for your understanding and support, hope you have a nice day.

Best Regards,
DJI SDK Support Team

[1afridi]

Hi thanks for your reply I have looked into DJI onboard SDK(OSDK). OSDK provides a very limited control of camera that is only stop/start video or shoot a photo. Features like zoom control focus Palette and isotherm control in case of thermal cameras is not available or maybe i havent been able to find them but if the OSDK supports such features for the A3 controller kindly direct me towards that and if not please provide me with alternatives to control the camera directly or via api of A3 flight controller Regards

[dji-dev]

Public comment from Bruce Cheung in Zendesk ticket #32049:

Dear Customer,

Thank you for contacting DJI.

Sorry that the DJI Onboard SDK-3.9 only supports the M210 V2 series for zoom operation on Z30 and other cameras.

If you have requirements for relevant functionality, It is recommended that you click on the links on the right side of the fill in the relevant demand information, https://formcrafts.com/a/dji-developer-feedback-en
In order to better match your requirements, try to include the following information when filling in：

1. Desired functions and requirements
2. Company/organization profile
3. Project descriptions that use this feature requirement.
4. Personal background or brief introduction.

Thank you for your understanding and support, hope you have a nice day.

Best Regards,

[1afridi]

Hey i am using DJI A3 microcontroller with DJI lightbridge2 for my custom made frame. The battery whi i am using are not intelligent due to which i open dji pilot app it doesnt display battery. So is there any way that i can use OSDK with non intelligent simle LiPo battery to estimate flight time and display it on Dji Pilot app Regards

…

On Wed, 12 Feb 2020, 3:58 pm DJI, ***@***.***> wrote: Public comment from Bruce Cheung in Zendesk ticket #32049 <https://djisdksupport.zendesk.com/agent/tickets/32049>: Dear Customer, Thank you for contacting DJI. Sorry that the DJI Onboard SDK-3.9 only supports the M210 V2 series for zoom operation on Z30 and other cameras. If you have requirements for relevant functionality, It is recommended that you click on the links on the right side of the fill in the relevant demand information, https://formcrafts.com/a/dji-developer-feedback-en In order to better match your requirements, try to include the following information when filling in： 1. Desired functions and requirements 2. Company/organization profile 3. Project descriptions that use this feature requirement. 4. Personal background or brief introduction. Thank you for your understanding and support, hope you have a nice day. Best Regards, — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#5?email_source=notifications&email_token=AOQLRPAACJMDO4NBCXFYHQLRCPI4BA5CNFSM4KSHAXG2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOELQLAQQ#issuecomment-585150530>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOQLRPB2KUNUJQFO46YDLITRCPI4BANCNFSM4KSHAXGQ> .