MMFlood: A Multimodal Dataset for Flood Delineation from Satellite Imagery.

Code and data access for the MMFlood dataset.

Last update: 05-2022

Dataset Access and Specifications

You can download the MMFlood dataset:

• from Zenodo: https://zenodo.org/record/6534637
• from IEEE Dataport: https://ieee-dataport.org/documents/mmflood-multimodal-dataset-flood-delineation-satellite-imagery

Structure

The dataset is organized in directories, with a JSON file providing metadata and other information such as the split configuration we selected. Its internal structure is as follows:

activations/
├─ EMSR107-1/
├─ .../
├─ EMSR548-0/
│  ├─ DEM/
│  │  ├─ EMSR548-0-0.tif
│  │  ├─ EMSR548-0-1.tif
│  │  ├─ ...
│  ├─ hydro/
│  │  ├─ EMSR548-0-0.tif
│  │  ├─ EMSR548-0-1.tif
│  │  ├─ ...
│  ├─ mask/
│  │  ├─ EMSR548-0-0.tif
│  │  ├─ EMSR548-0-1.tif
│  │  ├─ ...
│  ├─ s1_raw/
│  │  ├─ EMSR548-0-0.tif
│  │  ├─ EMSR548-0-1.tif
│  │  ├─ ...
activations.json

• Each folder is named after the Copernicus EMS code it refers to. Since most of them actually contain more than one area, an incremental counter is added to the name, e.g., EMSR458-0, EMSR458-1 and so on.
• Inside each EMSR folder there are four subfolders containing every available modality and the ground truth, in GeoTIFF format:
  • DEM: contains the Digital Elevation Model
  • hydro: contains the hydrography map for that region, if present
  • s1_raw: contains the Sentinel-1 image in VV-VH format
  • mask: contains the flood map, rasterized from EMS polygons
• Every EMSR subregion contains a variable number of tiles. however, for the same area, each modality always contains the same amount of files with the same name. Names have the following format: <emsr_code>-<emsr_region>_<tile_count>. For different reasons (retrieval, storage), areas larger than 2500x2500 pixels were divided in large tiles.
• Note: Every modality is guaranteed to contain at least one image, except for the hydrography that may be missing.

Last, the activations.json contains informations about each EMS activation, as extracted from the Copernicus Rapid Mapping site, as such:

{
    "EMSR107": {
        ...
    },
    "EMSR548": {
        "title": "Flood in Eastern Sicily, Italy",
        "type": "Flood",
        "country": "Italy",
        "start": "2021-10-27T11:31:00",
        "end": "2021-10-28T12:35:19",
        "lat": 37.435056244442684,
        "lon": 14.954437192250033,
        "subset": "test",
        "delineations": [
            "EMSR548_AOI01_DEL_PRODUCT_r1_VECTORS_v1_vector.zip"
        ]
    },
}

Data specifications

Image	Description	Format	Bands
S1 raw	Georeferenced Sentinel-1 imagery, IW GRD	GeoTIFF Float32	0: VV, 1: VH
DEM	MapZen Digital Elevation Model	GeoTIFF Float32	0: elevation
Hydrogr.	Binary map of permanent water basins, OSM	GeoTIFF Uint8	0: hydro
Mask	Manually validated ground truth label, Copernicus EMS	GeoTIFF Uint8	0: gt

Image metadata

Every image also contains the following contextual information, as GDAL metadata tags:

<GDALMetadata>
<Item name="acquisition_date">2021-10-31T16:56:28</Item>
  <Item name="code">EMSR548-0</Item>
  <Item name="country">Italy</Item>
  <Item name="event_date">2021-10-27T11:31:00</Item>
</GDALMetadata>

• acquisition_date refers to the acquisition timestamp of the Sentinel-1 image
• event_date refers to official event start date reported by Copernicus EMS

Code and installation

To run this code, simply clone it into a directory of choice and create a python environment.

git clone [email protected]:edornd/mmflood.git && cd mmflood
python3 -m venv .venv
pip install -r requirements.txt

Everything goes through the run command. Run python run.py --help for more information about commands and their arguments.

Data preparation

To prepare the raw data by tiling and preprocessing, you can run: python run.py prepare --data-source [PATH_TO_ACTIVATIONS] --data-processed [DESTINATION]

Training

Training uses HuggingFace accelerate to provide single-gpu and multi-gpu support. To launch on a single GPU:

CUDA_VISIBLE_DEVICES=... python run.py train [ARGS]

You can find an example script with parameters in the scripts folder.

Testing

Testing is run on non-tiled images (the preprocessing will format them without tiling). You can run the test on a single GPU using the test command. At the very least, you need to point the script to the output directory. If no checkpoint is provided, the best one (according to the monitored metric) will be selected automatically. You can also avoid storing outputs with --no-store-predictions.

CUDA_VISIBLE_DEVICES=... python run.py test --data-root [PATH_TO_OUTPUT_DIR] [--checkpoint-path [PATH]]

Data Attribution and Licenses

For the realization of this project, the following data sources were used:

• Copernicus EMS (Manual)
• Copernicus Sentinel-1 (License)
• MapZen/TileZen Elevation (License)
• OpenStreetMap water layers (License)