6.8.21 bump

apm-server/Chart.yaml

@@ -5,8 +5,8 @@ maintainers:
 - email: [email protected]
   name: Elastic
 name: apm-server
-version: 6.8.19-SNAPSHOT
-appVersion: 6.8.19-SNAPSHOT
+version: 6.8.21
+appVersion: 6.8.21
 sources:
   - https://github.com/elastic/apm
 icon: https://helm.elastic.co/icons/apm.png

apm-server/README.md

@@ -11,15 +11,14 @@ provided as-is with no warranties. Alpha features are not subject to the support
 SLA of official GA features (see [supported configurations][] for more details).
 
 <!-- development warning placeholder -->
-**Warning**: This branch is used for development, please use the latest [6.x][] release for released version.
 <!-- START doctoc generated TOC please keep comment here to allow auto update -->
 <!-- DON'T EDIT THIS SECTION, INSTEAD RE-RUN doctoc TO UPDATE -->
 
 
 - [Requirements](#requirements)
 - [Installing](#installing)
   - [Install released version using Helm repository](#install-released-version-using-helm-repository)
-  - [Install development version using 6.8 branch and 6.8.19-SNAPSHOT versions](#install-development-version-using-68-branch-and-6813-snapshot-versions)
+  - [Install development version using 6.8 branch and 6.8.21 versions](#install-development-version-using-68-branch-and-6813-snapshot-versions)
 - [Upgrading](#upgrading)
 - [Usage notes](#usage-notes)
 - [Configuration](#configuration)
@@ -43,7 +42,7 @@ See [supported configurations][] for more details.
 
 ## Installing
 
-This chart is tested with the latest 6.8.19-SNAPSHOT version.
+This chart is tested with the latest 6.8.21 version.
 
 ### Install released version using Helm repository
 
@@ -54,15 +53,15 @@ This chart is tested with the latest 6.8.19-SNAPSHOT version.
   - with Helm 3: `helm install apm-server --version <version> elastic/apm-server`
   - with Helm 2 (deprecated): `helm install --name apm-server --version <version> elastic/apm-server`
 
-### Install development version using 6.8 branch and 6.8.19-SNAPSHOT versions
+### Install development version using 6.8 branch and 6.8.21 versions
 
 * Clone the git repo: `git clone [email protected]:elastic/helm-charts.git`
 
 * Checkout the branch : git checkout 6.8
 
 * Install it:
-  - with Helm 3: `helm install apm-server ./helm-charts/apm-server --set imageTag=6.8.19-SNAPSHOT`
-  - with Helm 2 (deprecated): `helm install --name apm-server ./helm-charts/apm-server --set imageTag=6.8.19-SNAPSHOT`
+  - with Helm 3: `helm install apm-server ./helm-charts/apm-server --set imageTag=6.8.21`
+  - with Helm 2 (deprecated): `helm install --name apm-server ./helm-charts/apm-server --set imageTag=6.8.21`
 
 
 ## Upgrading
@@ -101,7 +100,7 @@ as a reference. They are also used in the automated testing of this chart.
 | `hostAliases`               | Configurable [hostAliases][]                                                                                                                               | `[]`                               |
 | `imagePullPolicy`           | The Kubernetes [imagePullPolicy][] value                                                                                                                   | `IfNotPresent`                     |
 | `imagePullSecrets`          | Configuration for [imagePullSecrets][] so that you can use a private registry for your image                                                               | `[]`                               |
-| `imageTag`                  | The APM Server Docker image tag                                                                                                                            | `6.8.19-SNAPSHOT`                  |
+| `imageTag`                  | The APM Server Docker image tag                                                                                                                            | `6.8.21`                           |
 | `image`                     | The APM Server Docker image                                                                                                                                | `docker.elastic.co/apm/apm-server` |
 | `ingress`                   | Configurable [ingress][] to expose the APM Server service                                                                                                  | see [values.yaml][]                |
 | `labels`                    | Configurable [labels][] applied to all APM server pods                                                                                                     | `{}`                               |
@@ -150,7 +149,7 @@ Please check [CONTRIBUTING.md][] before any contribution or for any questions
 about our development and testing process.
 
 [6.x]: https://github.com/elastic/helm-charts/releases
-[6.8.19-SNAPSHOT]: https://github.com/elastic/helm-charts/blob/6.8.19-SNAPSHOT/apm-server/README.md
+[6.8.21]: https://github.com/elastic/helm-charts/blob/6.8.21/apm-server/README.md
 [BREAKING_CHANGES.md]: https://github.com/elastic/helm-charts/blob/master/BREAKING_CHANGES.md
 [CHANGELOG.md]: https://github.com/elastic/helm-charts/blob/master/CHANGELOG.md
 [CONTRIBUTING.md]: https://github.com/elastic/helm-charts/blob/master/CONTRIBUTING.md

apm-server/examples/default/README.md

@@ -1,6 +1,6 @@
 # Default
 
-This example deploy APM Server 6.8.19-SNAPSHOT using [default values][].
+This example deploy APM Server 6.8.21 using [default values][].
 
 
 ## Usage

apm-server/examples/default/test/goss.yaml

@@ -3,4 +3,4 @@ http:
     status: 200
     timeout: 2000
     body:
-      - '6.8.19'
+      - '6.8.21'

apm-server/examples/oss/README.md

@@ -1,6 +1,6 @@
 # OSS
 
-This example deploy APM Server 6.8.19-SNAPSHOT using [APM Server OSS][] version.
+This example deploy APM Server 6.8.21 using [APM Server OSS][] version.
 
 
 ## Usage

apm-server/examples/oss/test/goss.yaml

@@ -3,4 +3,4 @@ http:
     status: 200
     timeout: 2000
     body:
-      - '6.8.19'
+      - '6.8.21'

apm-server/examples/security/README.md

@@ -1,6 +1,6 @@
 # Security
 
-This example deploy APM Server 6.8.19-SNAPSHOT using authentication and TLS to connect to
+This example deploy APM Server 6.8.21 using authentication and TLS to connect to
 Elasticsearch (see [values][]).
 
 

apm-server/examples/security/test/goss.yaml

@@ -3,4 +3,4 @@ http:
     status: 200
     timeout: 2000
     body:
-      - '6.8.19'
+      - '6.8.21'

apm-server/examples/upgrade/test/goss.yaml

@@ -3,4 +3,4 @@ http:
     status: 200
     timeout: 2000
     body:
-      - "6.8.19"
+      - "6.8.21"

apm-server/values.yaml

@@ -68,7 +68,7 @@ hostAliases: []
 #  - "bar.local"
 
 image: "docker.elastic.co/apm/apm-server"
-imageTag: "6.8.19-SNAPSHOT"
+imageTag: "6.8.21"
 imagePullPolicy: "IfNotPresent"
 imagePullSecrets: []
 

elasticsearch/Chart.yaml

@@ -5,8 +5,8 @@ maintainers:
 - email: [email protected]
   name: Elastic
 name: elasticsearch
-version: 6.8.19-SNAPSHOT
-appVersion: 6.8.19-SNAPSHOT
+version: 6.8.21
+appVersion: 6.8.21
 sources:
   - https://github.com/elastic/elasticsearch
 icon: https://helm.elastic.co/icons/elasticsearch.png

elasticsearch/README.md

@@ -6,15 +6,14 @@ This Helm chart is a lightweight way to configure and run our official
 [Elasticsearch Docker image][].
 
 <!-- development warning placeholder -->
-**Warning**: This branch is used for development, please use the latest [6.x][] release for released version.
 <!-- START doctoc generated TOC please keep comment here to allow auto update -->
 <!-- DON'T EDIT THIS SECTION, INSTEAD RE-RUN doctoc TO UPDATE -->
 
 
 - [Requirements](#requirements)
 - [Installing](#installing)
   - [Install released version using Helm repository](#install-released-version-using-helm-repository)
-  - [Install development version using 6.8 branch and 6.8.19-SNAPSHOT versions](#install-development-version-using-68-branch-and-6813-snapshot-versions)
+  - [Install development version using 6.8 branch and 6.8.21 versions](#install-development-version-using-68-branch-and-6813-snapshot-versions)
 - [Upgrading](#upgrading)
 - [Usage notes](#usage-notes)
 - [Configuration](#configuration)
@@ -54,7 +53,7 @@ See [supported configurations][] for more details.
 
 ## Installing
 
-This chart is tested with the latest 6.8.19-SNAPSHOT version.
+This chart is tested with the latest 6.8.21 version.
 
 ### Install released version using Helm repository
 
@@ -66,15 +65,15 @@ This chart is tested with the latest 6.8.19-SNAPSHOT version.
   - with Helm 2 (deprecated): `helm install --name elasticsearch --version <version> elastic/elasticsearch`
 
 
-### Install development version using 6.8 branch and 6.8.19-SNAPSHOT versions
+### Install development version using 6.8 branch and 6.8.21 versions
 
 * Clone the git repo: `git clone [email protected]:elastic/helm-charts.git`
 
 * Checkout the branch : git checkout 6.8
 
 * Install it:
-  - with Helm 3: `helm install elasticsearch ./helm-charts/elasticsearch --set imageTag=6.8.19-SNAPSHOT`
-  - with Helm 2 (deprecated): `helm install --name elasticsearch ./helm-charts/elasticsearch --set imageTag=6.8.19-SNAPSHOT`
+  - with Helm 3: `helm install elasticsearch ./helm-charts/elasticsearch --set imageTag=6.8.21`
+  - with Helm 2 (deprecated): `helm install --name elasticsearch ./helm-charts/elasticsearch --set imageTag=6.8.21`
 
 
 ## Upgrading
@@ -132,7 +131,7 @@ support multiple versions with minimal changes.
 | `httpPort`                         | The http port that Kubernetes will use for the healthchecks and the service. If you change this you will also need to set [http.port][] in `extraEnvs`                                                                                                                                                            | `9200`                                           |
 | `imagePullPolicy`                  | The Kubernetes [imagePullPolicy][] value                                                                                                                                                                                                                                                                          | `IfNotPresent`                                   |
 | `imagePullSecrets`                 | Configuration for [imagePullSecrets][] so that you can use a private registry for your image                                                                                                                                                                                                                      | `[]`                                             |
-| `imageTag`                         | The Elasticsearch Docker image tag                                                                                                                                                                                                                                                                                | `6.8.19-SNAPSHOT`                                 |
+| `imageTag`                         | The Elasticsearch Docker image tag                                                                                                                                                                                                                                                                                | `6.8.21`                                         |
 | `image`                            | The Elasticsearch Docker image                                                                                                                                                                                                                                                                                    | `docker.elastic.co/elasticsearch/elasticsearch`  |
 | `ingress`                          | Configurable [ingress][] to expose the Elasticsearch service. See [values.yaml][] for an example                                                                                                                                                                                                                  | see [values.yaml][]                              |
 | `initResources`                    | Allows you to set the [resources][] for the `initContainer` in the StatefulSet                                                                                                                                                                                                                                    | `{}`                                             |
@@ -398,7 +397,7 @@ about our development and testing process.
 
 [6.x]: https://github.com/elastic/helm-charts/releases
 [#63]: https://github.com/elastic/helm-charts/issues/63
-[6.8.19-SNAPSHOT]: https://github.com/elastic/helm-charts/blob/6.8.19-SNAPSHOT/elasticsearch/README.md
+[6.8.21]: https://github.com/elastic/helm-charts/blob/6.8.21/elasticsearch/README.md
 [BREAKING_CHANGES.md]: https://github.com/elastic/helm-charts/blob/master/BREAKING_CHANGES.md
 [CHANGELOG.md]: https://github.com/elastic/helm-charts/blob/master/CHANGELOG.md
 [CONTRIBUTING.md]: https://github.com/elastic/helm-charts/blob/master/CONTRIBUTING.md

elasticsearch/examples/config/README.md

@@ -1,6 +1,6 @@
 # Config
 
-This example deploy a single node Elasticsearch 6.8.19-SNAPSHOT with authentication and
+This example deploy a single node Elasticsearch 6.8.21 with authentication and
 custom [values][].
 
 

elasticsearch/examples/default/README.md

@@ -1,6 +1,6 @@
 # Default
 
-This example deploy a 3 nodes Elasticsearch 6.8.19-SNAPSHOT cluster using
+This example deploy a 3 nodes Elasticsearch 6.8.21 cluster using
 [default values][].
 
 

elasticsearch/examples/default/test/goss.yaml

@@ -15,7 +15,7 @@ http:
     status: 200
     timeout: 2000
     body:
-      - '"number" : "6.8.19"'
+      - '"number" : "6.8.21"'
       - '"cluster_name" : "elasticsearch"'
       - "You Know, for Search"
 

elasticsearch/examples/docker-for-mac/README.md

@@ -1,6 +1,6 @@
 # Docker for Mac
 
-This example deploy a 3 nodes Elasticsearch 6.8.19-SNAPSHOT cluster on [Docker for Mac][]
+This example deploy a 3 nodes Elasticsearch 6.8.21 cluster on [Docker for Mac][]
 using [custom values][].
 
 Note that this configuration should be used for test only and isn't recommended

elasticsearch/examples/kubernetes-kind/README.md

@@ -1,6 +1,6 @@
 # KIND
 
-This example deploy a 3 nodes Elasticsearch 6.8.19-SNAPSHOT cluster on [Kind][]
+This example deploy a 3 nodes Elasticsearch 6.8.21 cluster on [Kind][]
 using [custom values][].
 
 Note that this configuration should be used for test only and isn't recommended

elasticsearch/examples/microk8s/README.md

@@ -1,6 +1,6 @@
 # MicroK8S
 
-This example deploy a 3 nodes Elasticsearch 6.8.19-SNAPSHOT cluster on [MicroK8S][]
+This example deploy a 3 nodes Elasticsearch 6.8.21 cluster on [MicroK8S][]
 using [custom values][].
 
 Note that this configuration should be used for test only and isn't recommended

elasticsearch/examples/minikube/README.md

@@ -1,6 +1,6 @@
 # Minikube
 
-This example deploy a 3 nodes Elasticsearch 6.8.19-SNAPSHOT cluster on [Minikube][]
+This example deploy a 3 nodes Elasticsearch 6.8.21 cluster on [Minikube][]
 using [custom values][].
 
 If helm or kubectl timeouts occur, you may consider creating a minikube VM with

elasticsearch/examples/multi/README.md

@@ -1,6 +1,6 @@
 # Multi
 
-This example deploy an Elasticsearch 6.8.19-SNAPSHOT cluster composed of 3 different Helm
+This example deploy an Elasticsearch 6.8.21 cluster composed of 3 different Helm
 releases:
 
 - `helm-es-multi-master` for the 3 master nodes using [master values][]

elasticsearch/examples/openshift/README.md

@@ -1,6 +1,6 @@
 # OpenShift
 
-This example deploy a 3 nodes Elasticsearch 6.8.19-SNAPSHOT cluster on [OpenShift][]
+This example deploy a 3 nodes Elasticsearch 6.8.21 cluster on [OpenShift][]
 using [custom values][].
 
 ## Usage

elasticsearch/examples/openshift/test/goss.yaml

@@ -11,6 +11,6 @@ http:
     status: 200
     timeout: 2000
     body:
-      - '"number" : "6.8.19"'
+      - '"number" : "6.8.21"'
       - '"cluster_name" : "elasticsearch"'
       - "You Know, for Search"

elasticsearch/examples/oss/README.md

@@ -1,6 +1,6 @@
 # OSS
 
-This example deploy a 3 nodes Elasticsearch 6.8.19-SNAPSHOT cluster using
+This example deploy a 3 nodes Elasticsearch 6.8.21 cluster using
 [Elasticsearch OSS][] version.
 
 ## Usage

elasticsearch/examples/oss/test/goss.yaml

@@ -11,6 +11,6 @@ http:
     status: 200
     timeout: 2000
     body:
-      - '"number" : "6.8.19"'
+      - '"number" : "6.8.21"'
       - '"cluster_name" : "oss"'
       - 'You Know, for Search'

elasticsearch/examples/security/README.md

@@ -1,6 +1,6 @@
 # Security
 
-This example deploy a 3 nodes Elasticsearch 6.8.19-SNAPSHOT with authentication and
+This example deploy a 3 nodes Elasticsearch 6.8.21 with authentication and
 autogenerated certificates for TLS (see [values][]).
 
 Note that this configuration should be used for test only. For a production

elasticsearch/examples/upgrade/test/goss.yaml

@@ -11,6 +11,6 @@ http:
     status: 200
     timeout: 2000
     body:
-      - '"number" : "6.8.19"'
+      - '"number" : "6.8.21"'
       - '"cluster_name" : "upgrade"'
       - "You Know, for Search"

elasticsearch/values.yaml

@@ -57,7 +57,7 @@ hostAliases: []
 #  - "bar.local"
 
 image: "docker.elastic.co/elasticsearch/elasticsearch"
-imageTag: "6.8.19-SNAPSHOT"
+imageTag: "6.8.21"
 imagePullPolicy: "IfNotPresent"
 
 podAnnotations: {}

filebeat/Chart.yaml

@@ -5,8 +5,8 @@ maintainers:
 - email: [email protected]
   name: Elastic
 name: filebeat
-version: 6.8.19-SNAPSHOT
-appVersion: 6.8.19-SNAPSHOT
+version: 6.8.21
+appVersion: 6.8.21
 sources:
   - https://github.com/elastic/beats
 icon: https://helm.elastic.co/icons/beats.png