Works as standalone SVF or XSVF JTAG programmer for FPGA devices. This one should be better than my wifi_jtag. ESP8266 was tested by reading file from onboard SPI flash chip at ESP8266 (it can hold 3MB) and program the target JTAG device (Lattice XP2). ESP32 accepts SVF file upload from web browser. I tested it on Lattice ECP5. ESP8266 could probably do the same as ESP32 but it's untested.
It is small fork of Clifford Wolf's Lib(X)SVF, with minimal adaptation to get it working with ESP8266. Arduino ESP8266 Library wrapper is added with proper SPIFFS buffering and a small bugfix to original "svf.c" is done to accept decimal floats, e.g. it accepts now numbers like 1.00E-02 while original library would throw syntax error or accept only 1E-02
Close arduino
cd ~/Arduino/libraries
git clone https://github.com/emard/LibXSVF
Some additional dependencies are required, this list may not be complete or some apply for ESP32 or ESP8266. Here are git checkouts known to work on ESP32. espressif/arduino-esp32 from 2018 doesn't work in this combination - ESPAsyncWebServer itself works but can't open any pages stored in SPIFFS.
*** ESP32 ***
arduino-esp32 Tue Dec 19 11:07:22 2017 -0200
https://github.com/espressif/arduino-esp32
git checkout 70d0d4648766cea047613062ed50a9ecfc9de31f
AsyncTCP Sat Nov 25 23:51:36 2017 +0100
https://github.com/me-no-dev/AsyncTCP
git checkout 4dbbf1060923fd3940c6478bc2ac887ec389397f
ESPAsyncWebServer Sun Nov 26 02:24:07 2017 +0200
https://github.com/me-no-dev/ESPAsyncWebServer
git checkout 232b87aeb12dd212af21b62a9f68e5e2c89a3a9c
ArduinoJson Fri Jan 19 15:35:19 2018 +0100
https://github.com/bblanchon/ArduinoJson
git checkout cf5396aaed6d16d1fb4e73b82ce6606938591043
arduino-esp32fs-plugin
https://github.com/me-no-dev/arduino-esp32fs-plugin
release ESP32FS-v0.1.zip
*** ESP8266 ***
ESPAsyncTCP
https://github.com/me-no-dev/ESPAsyncTCP
FSBrowserNG
https://github.com/gmag11/FSBrowserNG
ESPAsyncWebServer
https://github.com/me-no-dev/ESPAsyncWebServer
NtpClient
https://github.com/gmag11/NtpClient
Time
*** OLED ***
SSD1331
https://github.com/emard/SSD_13XX
I think it should be possible to use latest ESP32 arduino support from boards manager and other newer version of above liblraries. If AsyncTCP throws compiling errors, switch to "idf-update" branch:
cd ~/Arduino/libraries/AsyncTCP
git pull
git checkout idf-update
In ESP32 arduino support directory, edit file "SD.cpp"
~/.arduino15/packages/esp32/hardware/esp32/1.0.0/libraries/SD/src/SD.cpp
and set SD card SPI bus initialization to explicit pinout:
// spi.begin(int8_t sck, int8_t miso, int8_t mosi, int8_t ss)
spi.begin(14, 12, 13, -1); // v1.7
spi.begin(14, 2, 15, -1); // v1.8 and higher
Start arduino, open examples->LibXSVF
ESP8266 (examples/prog)
In the sketch example, you can place file in "/data/bitstream.svf" and click Tools->ESP8266 Sketch Data Upload, or get some cool Web server like FSBrowserNG which can already upload any file to "/bitstream.svf" using web browser.
ESP32 (examples/websvf)
Process packetized SVF stream from web file upload. Packets need to come in sequential order. Open page esp32.lan, enter any string and press ENTER, it will show JTAG device ID. Open page esp32.lan/upload.htm navigate to SVF file and click upload. 2MB SVF file uploads in 12 seoonds. ESP32 needs to buffer each command, remember to limit command size to 128 kbit or less at SVF file generation. Lattice example that limits to 8 kbit (works up to 128):
ddtcmd -oft -svfsingle -revd -maxdata 8 -if bitstream.xcf -of bitstream.svf
On power up it will shortly try to connect to the access point with default ssid/password:
ssid: websvf
pass: 12345678
If it can't connect as wifi client, it will become wifi access point with same ssid and passowrd, IP address of server will be 192.168.4.1 and it will give UP addresses to clients like 192.168.4.2, 3, etc...
To change wifi settings, insert SD card with file "ulx3s-wifi.conf" in SD root directory:
{
"host_name": "ulx3s",
"ssid": "ulx3s",
"password": "testpass",
"http_username": "user",
"http_password": "pass"
}
Max file length 2047 bytes and json syntax. For "host_name" and "ssid" it's recommended to use the same value.
It's currently "hidden" in xsvftool-esp8266.c You can edit this file and recompile sketch to change pinout.
#if ESP8266
#define TCK 14 // NodeMCU D5
#define TMS 5 // NodeMCU D1
#define TDI 13 // NodeMCU D7
#define TDO 12 // NodeMCU D6
#endif
#if ESP32
#define TCK 18
#define TMS 21
#define TDI 23
#define TDO 19
#endif
[x] fix memory leaks, if WEB TCP connection is broken,
it won't free() what it had malloc()'d
[x] make upload page be the home page
[x] SD card support
[x] OLED and buttons support
[x] websvf AP mode
[x] progress bar
[x] after upload show status, success or error
[ ] after upload show elapsed time
[ ] test websvf on ESP8266
[ ] SPI or DMA (remote control on ESP32) acceleration
[x] report IP to usb-serial (works only if passthru image is loaded)
[ ] Clicking on "upload" button during already running upload
will corrupt the transfer.
Use upload-running flag to prevent concurrent uploads.
[ ] Timeout (cca 10 minutes) to clear upload-running flag
as some help in case of broken connections
[x] report error if out-of-order packet is received
[ ] make it work from text client "lynx" currently it just opens
empty page with some "HTTP/1.0 200 OK" response.
Text client "elinks" works on "minimal.htm" page, though.
