Merge branch 'docs/updated_esp32_s3_devkitc_1_figures' into 'master'

Docs: update figures for esp32-s3-devkitc-1 user guide Closes DOC-3349 See merge request espressif/esp-idf!19591
espressif · Aug 31, 2022 · 5a35714 · 5a35714
2 parents 91e8312 + 5dcb602
commit 5a35714
Show file tree

Hide file tree

Showing 4 changed files with 4 additions and 4 deletions.
diff --git a/docs/_static/ESP32-S3-DevKitC-1_v2-SystemBlock.png b/docs/_static/ESP32-S3-DevKitC-1_v2-SystemBlock.png
diff --git a/docs/_static/ESP32-S3-DevKitC-1_v2-annotated-photo.png b/docs/_static/ESP32-S3-DevKitC-1_v2-annotated-photo.png
diff --git a/docs/en/hw-reference/esp32s3/user-guide-devkitc-1.rst b/docs/en/hw-reference/esp32s3/user-guide-devkitc-1.rst
@@ -38,7 +38,7 @@ Description of Components
 
 .. _user-guide-s3-devkitc-1-v1.1-board-front:
 
-.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v1.1-annotated-photo.png
+.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-annotated-photo.png
     :align: center
     :alt: ESP32-S3-DevKitC-1 - front
 
@@ -64,7 +64,7 @@ The key components of the board are described in a counter-clockwise direction.
      - Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
    * - Reset Button
      - Press this button to restart the system.
-   * - ESP32-S3 USB Port
+   * - USB Port
      - ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging.
    * - USB-to-UART Bridge
      - Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.

diff --git a/docs/zh_CN/hw-reference/esp32s3/user-guide-devkitc-1.rst b/docs/zh_CN/hw-reference/esp32s3/user-guide-devkitc-1.rst
@@ -38,7 +38,7 @@ ESP32-S3-DevKitC-1 是一款入门级开发板，搭载 Wi-Fi + Bluetooth® LE
 
 .. _user-guide-s3-devkitc-1-v1.1-board-front:
 
-.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v1.1-annotated-photo.png
+.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-annotated-photo.png
     :align: center
     :alt: ESP32-S3-DevKitC-1 - 正面
 
@@ -64,7 +64,7 @@ ESP32-S3-DevKitC-1 是一款入门级开发板，搭载 Wi-Fi + Bluetooth® LE
      - 下载按键。按住 **Boot** 键的同时按一下 **Reset** 键进入“固件下载”模式，通过串口下载固件。
    * - Reset Button（Reset 键）
      - 复位按键。
-   * - ESP32-S3 USB Port（ESP32-S3 USB 接口）
+   * - USB Port（USB 接口）
      - ESP32-S3 USB OTG 接口，支持全速 USB 1.1 标准。ESP32-S3 USB 接口可用作开发板的供电接口，可烧录固件至芯片，可通过 USB 协议与芯片通信，也可用于 JTAG 调试。
    * - USB-to-UART Bridge（USB 转 UART 桥接器）
      - 单芯片 USB 至 UART 桥接器，可提供高达 3 Mbps 的传输速率。