Skip to content

Commit

Permalink
Merge branch 'bugfix/usb_serial_driver_block' into 'master'
Browse files Browse the repository at this point in the history
usb_serial_jtag: Fix bug of blocking TX xfer when using driver

Closes IDF-5390 and IDFGH-8776

See merge request espressif/esp-idf!22412
  • Loading branch information
mythbuster5 committed Feb 24, 2023
2 parents 0d97eeb + 720b8d9 commit b184b9a
Show file tree
Hide file tree
Showing 4 changed files with 32 additions and 14 deletions.
Original file line number Diff line number Diff line change
Expand Up @@ -35,7 +35,9 @@ typedef struct {
* USB-SERIAL-JTAG driver's ISR will be attached to the same CPU core that calls this function. Thus, users
* should ensure that the same core is used when calling `usb_serial_jtag_driver_uninstall()`.
*
* @note Blocking mode will result in usb_serial_jtag_write_bytes() blocking until all bytes have been written to the TX FIFO.
* @note Blocking mode will result in usb_serial_jtag_write_bytes() blocking for a
* short period if the TX FIFO if full. It will not block again until the buffer
* has some space available again.
*
* @param usb_serial_jtag_driver_config_t Configuration for usb_serial_jtag driver.
*
Expand Down Expand Up @@ -65,7 +67,7 @@ int usb_serial_jtag_read_bytes(void* buf, uint32_t length, TickType_t ticks_to_w
*
* @param src data buffer address
* @param size data length to send
* @param ticks_to_wait Timeout in RTOS ticks
* @param ticks_to_wait Maximum timeout in RTOS ticks
*
* @return
* - The number of bytes pushed to the TX FIFO
Expand Down
4 changes: 2 additions & 2 deletions components/driver/usb_serial_jtag/usb_serial_jtag.c
Original file line number Diff line number Diff line change
Expand Up @@ -165,8 +165,8 @@ int usb_serial_jtag_write_bytes(const void* src, size_t size, TickType_t ticks_t
// Blocking method, Sending data to ringbuffer, and handle the data in ISR.
xRingbufferSend(p_usb_serial_jtag_obj->tx_ring_buf, (void*) (buff), size, ticks_to_wait);
// Now trigger the ISR to read data from the ring buffer.
usb_serial_jtag_ll_ena_intr_mask(USB_SERIAL_JTAG_INTR_SERIAL_IN_EMPTY);
return size;
usb_serial_jtag_ll_ena_intr_mask(USB_SERIAL_JTAG_INTR_SERIAL_IN_EMPTY);
return size;
}

esp_err_t usb_serial_jtag_driver_uninstall(void)
Expand Down
16 changes: 15 additions & 1 deletion components/vfs/vfs_usb_serial_jtag.c
Original file line number Diff line number Diff line change
Expand Up @@ -77,6 +77,8 @@ typedef struct {
// When the driver is used (via esp_vfs_usb_serial_jtag_use_driver),
// reads are either blocking or non-blocking depending on this flag.
bool non_blocking;
// TX has already tried a blocking send.
bool tx_tried_blocking;
// Newline conversion mode when transmitting
esp_line_endings_t tx_mode;
// Newline conversion mode when receiving
Expand Down Expand Up @@ -404,7 +406,19 @@ static int usbjtag_rx_char_via_driver(int fd)
static void usbjtag_tx_char_via_driver(int fd, int c)
{
char ch = (char) c;
usb_serial_jtag_write_bytes(&ch, 1, portMAX_DELAY);
TickType_t ticks = (TX_FLUSH_TIMEOUT_US / 1000) / portTICK_PERIOD_MS;
if (usb_serial_jtag_write_bytes(&ch, 1, 0) != 0) {
s_ctx.tx_tried_blocking = false;
return;
}

if (s_ctx.tx_tried_blocking == false) {
if (usb_serial_jtag_write_bytes(&ch, 1, ticks) != 0) {
return;
} else {
s_ctx.tx_tried_blocking = true;
}
}
}

void esp_vfs_usb_serial_jtag_use_nonblocking(void)
Expand Down
20 changes: 11 additions & 9 deletions docs/en/api-guides/usb-serial-jtag-console.rst
Original file line number Diff line number Diff line change
Expand Up @@ -53,26 +53,28 @@ The USB Serial/JTAG Controller is able to put the {IDF_TARGET_NAME} into downloa
Limitations
===========

There are several limitations to the USB console feature. These may or may not be significant, depending on the type of application being developed, and the development workflow.
There are several limitations to the USB Serial/JTAG console feature. These may or may not be significant, depending on the type of application being developed, and the development workflow.

{IDF_TARGET_BOOT_PIN:default = "Not Updated!", esp32c3 = "GPIO9", esp32s3 = "GPIO0"}

1. If the application accidentally reconfigures the USB peripheral pins, or disables the USB Serial/JTAG Controller, the device will disappear from the system. After fixing the issue in the application, you will need to manually put the {IDF_TARGET_NAME} into download mode by pulling low {IDF_TARGET_BOOT_PIN} and resetting the chip.

2. If the application enters deep sleep mode, USB CDC device will disappear from the system.
2. If the application enters deep sleep mode, the USB Serial/JTAG device will disappear from the system.

3. The behavior between an actual USB-to-serial bridge chip and the USB Serial/JTAG Controller is slightly different if the ESP-IDF application does not listen for incoming bytes. An USB-to-serial bridge chip will just send the bytes to a (not listening) chip, while the USB Serial/JTAG Controller will block until the application reads the bytes. This can lead to a non-responsive looking terminal program.
3. For data sent in the direction of {IDF_TARGET_NAME} to PC Terminal (e.g. stdout, logs), the {IDF_TARGET_NAME} first writes to a small internal buffer. If this buffer becomes full (for example, if no PC Terminal is connected), the {IDF_TARGET_NAME} will do a one-time wait of 50ms hoping for the PC Terminal to request the data. This can appear as a very brief 'pause' in your application.

4. The USB CDC device won't work in sleep modes as normal due to the lack of APB clock in sleep modes. This includes deep-sleep, light-sleep (automataic light-sleep as well).
4. For data sent in the PC Terminal to {IDF_TARGET_NAME} direction (e.g. console commands), many PC Terminals will wait for the {IDF_TARGET_NAME} to ingest the bytes before allowing you to sending more data. This is in contrast to using a USB-to-Serial (UART) bridge chip, which will always ingest the bytes and send them to a (possibly not listening) {IDF_TARGET_NAME}.

5. The power consumption in sleep modes will be higher if the USB CDC device is in use.
5. The USB Serial/JTAG device won't work in sleep modes as normal due to the lack of APB clock in sleep modes. This includes deep-sleep, light-sleep (automataic light-sleep as well).

This is because we want to keep the USB CDC device alive during software reset by default.
6. The power consumption in sleep modes will be higher if the USB Serial/JTAG device is in use.

However there is an issue that this might also increase the power consumption in sleep modes. This is because the software keeps a clock source on during the reset to keep the USB CDC device alive. As a side-effect, the clock is also kept on during sleep modes. There is one exception: the clock will only be kept on when your USB CDC port is really in use (like data transaction), therefore, if your USB CDC is connected to power bank or battery, etc., instead of a valid USB host (for example, a PC), the power consumption will not increase.
This is because we want to keep the USB Serial/JTAG device alive during software reset by default.

However there is an issue that this might also increase the power consumption in sleep modes. This is because the software keeps a clock source on during the reset to keep the USB Serial/JTAG device alive. As a side-effect, the clock is also kept on during sleep modes. There is one exception: the clock will only be kept on when your USB Serial/JTAG port is really in use (like data transaction), therefore, if your USB Serial/JTAG is connected to power bank or battery, etc., instead of a valid USB host (for example, a PC), the power consumption will not increase.

If you still want to keep low power consumption in sleep modes:

1. If you are not using the USB CDC port, you don't need to do anything. Software will detect if the CDC device is connected to a valid host before going to sleep, and keep the clocks only when the host is connected. Otherwise the clocks will be turned off as normal.
1. If you are not using the USB Serial/JTAG port, you don't need to do anything. Software will detect if the USB Serial/JTAG is connected to a valid host before going to sleep, and keep the clocks only when the host is connected. Otherwise the clocks will be turned off as normal.

2. If you are using the USB CDC port, please disable the menuconfig option ``CONFIG_RTC_CLOCK_BBPLL_POWER_ON_WITH_USB``. The clock will be switched off as normal during software reset and in sleep modes. In these cases, the USB CDC device may be unplugged from the host.
2. If you are using the USB Serial/JTAG port, please disable the menuconfig option ``CONFIG_RTC_CLOCK_BBPLL_POWER_ON_WITH_USB``. The clock will be switched off as normal during software reset and in sleep modes. In these cases, the USB Serial/JTAG device may be unplugged from the host.

0 comments on commit b184b9a

Please sign in to comment.