Kad eachbin fix

swarm/network/kademlia.go

@@ -358,6 +358,10 @@ func (k *Kademlia) Off(p *Peer) {
 	}
 }
 
+//EachBin iterates over each connection of a kademlia table, per bin.
+//So `po` will be representing the bin value (0..255), while `val` represents an
+//existing connection inside that bin.
+//For any such connection found, the parameter func `eachBinFunc` will be executed
 func (k *Kademlia) EachBin(base []byte, pof pot.Pof, o int, eachBinFunc func(conn *Peer, po int) bool) {
 	k.lock.RLock()
 	defer k.lock.RUnlock()
@@ -367,12 +371,15 @@ func (k *Kademlia) EachBin(base []byte, pof pot.Pof, o int, eachBinFunc func(con
 	kadDepth := depthForPot(k.conns, k.MinProxBinSize, k.base)
 
 	k.conns.EachBin(base, pof, o, func(po, size int, f func(func(val pot.Val, i int) bool) bool) bool {
-		if startPo > 0 && endPo != k.MaxProxDisplay {
-			startPo = endPo + 1
-		}
+		//if the peer's bin is smaller than the kademlia depth,
+		//only the peer's bin should be considered
 		if po < kadDepth {
+			startPo = po
 			endPo = po
 		} else {
+			//if the peer's bin is equal or higher than the kademlia depth,
+			//each bin from the depth up to k.MaxProxDisplay should be considered
+			startPo = kadDepth
 			endPo = k.MaxProxDisplay
 		}
 

swarm/network/kademlia_test.go

@@ -1,4 +1,4 @@
-// Copyright 2017 The go-ethereum Authors
+// Copyright 2018 The go-ethereum Authors
 // This file is part of the go-ethereum library.
 //
 // The go-ethereum library is free software: you can redistribute it and/or modify
@@ -731,3 +731,155 @@ func newTestDiscoveryPeer(addr pot.Address, kad *Kademlia) *Peer {
 	}
 	return NewPeer(bp, kad)
 }
+
+/*
+TestEachBin is a unit test for the kademlia's `EachBin` function.
+That function is actually used only for streamer subscriptions.
+
+Thus, the test does:
+	* assigns each known connected peer to a bin map
+  * build up a known kademlia in advance
+	* runs the EachBin function, which returns supposed subscription bins
+	* store all supposed bins per peer in a map
+	* check that all peers have the expected subscriptions
+
+This kad table and its peers are copied from TestKademliaCase1,
+it represents an edge case but for the purpose of a unit test for
+the `EachBin` function it is ok.
+
+Addresses used in this test are discovered as part of the simulation network
+in higher level tests for streaming. They were generated randomly.
+
+=========================================================================
+Thu Dec 13 14:21:47 UTC 2018 KΛÐΞMLIΛ hive: queen's address: 7efef1
+population: 49 (49), MinProxBinSize: 2, MinBinSize: 2, MaxBinSize: 4
+000 18 8196 835f 8958 8e23          | 18 8196 (0) 835f (0) 8958 (0) 8e23 (0)
+001 14 2690 28f0 2850 3a51          | 14 2690 (0) 28f0 (0) 2850 (0) 3a51 (0)
+002 11 4d72 4a45 4375 4607          | 11 4d72 (0) 4a45 (0) 4375 (0) 4607 (0)
+003  1 646e                         |  1 646e (0)
+004  3 769c 76d1 7656               |  3 769c (0) 76d1 (0) 7656 (0)
+============ DEPTH: 5 ==========================================
+005  1 7a48                         |  1 7a48 (0)
+006  1 7cbd                         |  1 7cbd (0)
+007  0                              |  0
+008  0                              |  0
+009  0                              |  0
+010  0                              |  0
+011  0                              |  0
+012  0                              |  0
+013  0                              |  0
+014  0                              |  0
+015  0                              |  0
+=========================================================================
+*/
+func TestEachBin(t *testing.T) {
+	//the pivot address; this is the actual kademlia node
+	pivotAddr := "7efef1c41d77f843ad167be95f6660567eb8a4a59f39240000cce2e0d65baf8e"
+
+	//a map of bin number to addresses from the given kademlia
+	binMap := make(map[int][]string)
+	binMap[0] = []string{
+		"835fbbf1d16ba7347b6e2fc552d6e982148d29c624ea20383850df3c810fa8fc",
+		"81968a2d8fb39114342ee1da85254ec51e0608d7f0f6997c2a8354c260a71009",
+	}
+	binMap[1] = []string{
+		"28f0bc1b44658548d6e05dd16d4c2fe77f1da5d48b6774bc4263b045725d0c19",
+		"2690a910c33ee37b91eb6c4e0731d1d345e2dc3b46d308503a6e85bbc242c69e",
+	}
+	binMap[2] = []string{
+		"4a45f1fc63e1a9cb9dfa44c98da2f3d20c2923e5d75ff60b2db9d1bdb0c54d51",
+		"4d72a04ddeb851a68cd197ef9a92a3e2ff01fbbff638e64929dd1a9c2e150112",
+	}
+	binMap[3] = []string{
+		"646e9540c84f6a2f9cf6585d45a4c219573b4fd1b64a3c9a1386fc5cf98c0d4d",
+	}
+	binMap[4] = []string{
+		"7656caccdc79cd8d7ce66d415cc96a718e8271c62fb35746bfc2b49faf3eebf3",
+		"76d1e83c71ca246d042e37ff1db181f2776265fbcfdc890ce230bfa617c9c2f0",
+		"769ce86aa90b518b7ed382f9fdacfbed93574e18dc98fe6c342e4f9f409c2d5a",
+	}
+	binMap[5] = []string{
+		"7a48f75f8ca60487ae42d6f92b785581b40b91f2da551ae73d5eae46640e02e8",
+	}
+	binMap[6] = []string{
+		"7cbd42350bde8e18ae5b955b5450f8e2cef3419f92fbf5598160c60fd78619f0",
+	}
+
+	//create the pivot's kademlia
+	addr := common.FromHex(pivotAddr)
+	k := NewKademlia(addr, NewKadParams())
+
+	//construct the peers and the kademlia
+	for _, binaddrs := range binMap {
+		for _, a := range binaddrs {
+			addr := common.FromHex(a)
+			k.On(NewPeer(&BzzPeer{BzzAddr: &BzzAddr{OAddr: addr}}, k))
+		}
+	}
+
+	//TODO: check kad table is same
+	//currently k.String() prints date so it will never be the same :)
+	//--> implement JSON representation of kad table
+	log.Debug(k.String())
+
+	//simulate that we would do subscriptions: just store the bin numbers
+	fakeSubscriptions := make(map[string][]int)
+	//define the function which should run for each connection
+	eachBinFunc := func(p *Peer, bin int) bool {
+		//get the peer ID
+		peerstr := fmt.Sprintf("%x", p.Over())
+		//create the array of bins per peer
+		if _, ok := fakeSubscriptions[peerstr]; !ok {
+			fakeSubscriptions[peerstr] = make([]int, 0)
+		}
+		//store the (fake) bin subscription
+		fakeSubscriptions[peerstr] = append(fakeSubscriptions[peerstr], bin)
+		return true
+	}
+	//run the k.EachBin function
+	k.EachBin(addr[:], pot.DefaultPof(k.MaxProxDisplay), 0, eachBinFunc)
+	//calculate the kademlia depth
+	kdepth := k.NeighbourhoodDepth()
+
+	//now, check that all peers have the expected (fake) subscriptions
+	//iterate the bin map
+	for bin, peers := range binMap {
+		//for every peer...
+		for _, peer := range peers {
+			//...get its (fake) subscriptions
+			fakeSubs := fakeSubscriptions[peer]
+			//if the peer's bin is below the kademlia depth...
+			if bin < kdepth {
+				//(iterate all (fake) subscriptions)
+				for _, subbin := range fakeSubs {
+					//...only the peer's bin should be "subscribed"
+					//(and thus have only one subscription)
+					if subbin != bin || len(fakeSubs) != 1 {
+						t.Fatalf("Did not get expected subscription for bin < depth; bin of peer %s: %d, subscription: %d", peer, bin, subbin)
+					}
+				}
+			} else { //if the peer's bin is equal or higher than the kademlia depth...
+				//(iterate all (fake) subscriptions)
+				for i, subbin := range fakeSubs {
+					//...each bin from the peer's bin number up to k.MaxProxDisplay should be "subscribed"
+					// as we start from depth we can use the iteration index to check
+					if subbin != i+kdepth {
+						t.Fatalf("Did not get expected subscription for bin > depth; bin of peer %s: %d, subscription: %d", peer, bin, subbin)
+					}
+					//the last "subscription" should be k.MaxProxDisplay
+					if i == len(fakeSubs)-1 && subbin != k.MaxProxDisplay {
+						t.Fatalf("Expected last subscription to be: %d, but is: %d", k.MaxProxDisplay, subbin)
+					}
+				}
+			}
+		}
+	}
+
+	//print some output
+	for p, subs := range fakeSubscriptions {
+		log.Debug(fmt.Sprintf("Peer %s has the following fake subscriptions: ", p))
+		for _, bin := range subs {
+			log.Debug(fmt.Sprintf("%d,", bin))
+		}
+	}
+}