A LED-Lamp in Burger/PUCK Design.
You need:
- one WeMos D1 Mini
- one microswitch 6x6x13mm
- a piece of twelve LEDs from a SK6812 (RGBNW) LED strip with 60 LEDs/m
- one powerplug
- one powesupply with at least 5v 1amp
- a kit of our lamp body
Now you have to solder it like in schematics:
Now Install the Software:
Download Repo from https://github.com/FabLab-Luenen/McLighting.
Replace the definitions.h in McLighting/Arduino with those of this repo.
Replace the data directory in McLighting/Arduino with those of this repo.
Load it into Arduino IDE and install all libraries referenced in https://github.com/FabLab-Luenen/McLighting.
Apply settings as shown:
Upload sketch to WeMos.
Connect to the AP of the lamp.
Select your wlan and connect to it.
Open http://[ip_of_lamp]/upload in your browser.
Upload all files within the data folder.
If you assembled it all correctly it should look like this:
and work like this:
and this:
You can support us with a donation
