ESP8266 SONY S-LINK/Control-A1 Library.
This library allows control of Sony Home Entertainment Devices via Sony S-link/Control-A1/Control A-1 II.
(C) Tyler Goulding, 2020, CC-BY-SA 4.0 https://creativecommons.org/licenses/by-sa/4.0/
The library is designed specifically for an ESP8266. I may provide support for other devices if needed. The library makes uses of hw timer 0 so do not use take control of the timer for your own needs.
For hardware, make sure to connect the slink line via a 220R and preferably a diode. I have been running it without a diode simply because I had no free ones when I made this library. If you are only controlling a single device, then this should be fine. If you are driving a full home entertainment system, use a diode to limit current in the case of collisions.
This library is based off Ircama's Sony SLink library: https://github.com/Ircama/Sony_SLink.git
Go to the libraries directory in your Arduino folder. and clone this repo
$ cd path/to/Arduino/libraries
$ git clone https://github.com/tylerGoulding/ESP8266_Slink.gitTo use the library in your own sketch, select it from Sketch > Import Library.
Simplest example of using this library:
#define CTRL_A1_PIN 2 // S-Link Control-A1 pin
#include "ESP8266_Slink.h"
Slink slink;
void setup() {
slink.init(CTRL_A1_PIN); // Set-up S-Link pin
slink.sendCommand(SLINK_DEVICE_AMP, SLINK_CMD_AMP_POWER_ON);
}
void loop() {
}Check the examples directory for further examples.
slink.init(slinkPin) - set-up S-Link pin
slink.sendCommand(device, command) - send a command to the device;
Special thanks to Ircama. His code provided the timing and protocol. I simply made it timer based and work on an ESP8266.
Code heavily based on
- Ircama's code: https://github.com/Ircama/Sony_SLink.git
Ircama's code heavily based on:
- hajdbo's code: https://github.com/hajdbo/sony-jukebox-slink/blob/master/jukebox.pde
- EdsterG's code: https://github.com/EdsterG/LANC_Library
The following are reference documents compiled by Ircama as well:
-
Sony S-Link gateway document: http://ee.bradley.edu/projects/proj2001/sonyntwk/SLink.PDF
-
How SONY's S-LINK/CTRL-A(II) protocol works (waveform): http://boehmel.de/slink.htm
-
Codes for Sony STR-DA50ES receiver: http://www.hifi-remote.com/sony/Sony_dsp_192.htm
-
S-Link Parallel Device for Linux http://web.archive.org/web/20040722060841/http://www.undeadscientist.com/slink/index.html
-
Reverse Engineered Control-A1 codes (Using the Sony CDP-CX250) Written by BigDave (2/19/98) http://web.archive.org/web/19981202175957/http://www.cc.gatech.edu/people/home/bigdave/cdplayer/control-a1.txt
-
Working S-Link code - Background of the S-link protocol http://forums.parallax.com/discussion/70973/working-s-link-code-long
-
Slink Send and Receive Commands for Sony MiniDisc Recorders http://web.archive.org/web/20030419100153/http://web2.airmail.net/will/mdslink.txt
-
Jukebox Interface Guide http://web.archive.org/web/20030414200645/http://www.upl.cs.wisc.edu/~orn/jukebox/guide.html
-
Original Control-A1 document http://web.archive.org/web/20030414231523/http://www.upl.cs.wisc.edu/~orn/jukebox/controla1.html
Tested with a Sony STR-DA50ES receiver/amplifier. Service manual: http://sportsbil.com/sony/STR/STR-D/STR-DA30ES_DA50ES_V55ES_v1.1.pdf
Feel free to share this source code, but include explicit mention to the author. Licensed under creative commons - see http://creativecommons.org/licenses/by-sa/4.0/