Extend Curve to allow for arbitrary domains

doc/classes/AnimationNodeOneShot.xml

@@ -70,14 +70,14 @@
 			If [code]true[/code], breaks the loop at the end of the loop cycle for transition, even if the animation is looping.
 		</member>
 		<member name="fadein_curve" type="Curve" setter="set_fadein_curve" getter="get_fadein_curve">
-			Determines how cross-fading between animations is eased. If empty, the transition will be linear.
+			Determines how cross-fading between animations is eased. If empty, the transition will be linear. Should be a unit [Curve].
 		</member>
 		<member name="fadein_time" type="float" setter="set_fadein_time" getter="get_fadein_time" default="0.0">
 			The fade-in duration. For example, setting this to [code]1.0[/code] for a 5 second length animation will produce a cross-fade that starts at 0 second and ends at 1 second during the animation.
 			[b]Note:[/b] [AnimationNodeOneShot] transitions the current state after the end of the fading. When [AnimationNodeOutput] is considered as the most upstream, so the [member fadein_time] is scaled depending on the downstream delta. For example, if this value is set to [code]1.0[/code] and a [AnimationNodeTimeScale] with a value of [code]2.0[/code] is chained downstream, the actual processing time will be 0.5 second.
 		</member>
 		<member name="fadeout_curve" type="Curve" setter="set_fadeout_curve" getter="get_fadeout_curve">
-			Determines how cross-fading between animations is eased. If empty, the transition will be linear.
+			Determines how cross-fading between animations is eased. If empty, the transition will be linear. Should be a unit [Curve].
 		</member>
 		<member name="fadeout_time" type="float" setter="set_fadeout_time" getter="get_fadeout_time" default="0.0">
 			The fade-out duration. For example, setting this to [code]1.0[/code] for a 5 second length animation will produce a cross-fade that starts at 4 second and ends at 5 second during the animation.

doc/classes/AnimationNodeStateMachineTransition.xml

@@ -41,7 +41,7 @@
 			The transition type.
 		</member>
 		<member name="xfade_curve" type="Curve" setter="set_xfade_curve" getter="get_xfade_curve">
-			Ease curve for better control over cross-fade between this state and the next.
+			Ease curve for better control over cross-fade between this state and the next. Should be a unit [Curve].
 		</member>
 		<member name="xfade_time" type="float" setter="set_xfade_time" getter="get_xfade_time" default="0.0">
 			The time to cross-fade between this state and the next.

doc/classes/AnimationNodeTransition.xml

@@ -96,7 +96,7 @@
 			The number of enabled input ports for this animation node.
 		</member>
 		<member name="xfade_curve" type="Curve" setter="set_xfade_curve" getter="get_xfade_curve">
-			Determines how cross-fading between animations is eased. If empty, the transition will be linear.
+			Determines how cross-fading between animations is eased. If empty, the transition will be linear. Should be a unit [Curve].
 		</member>
 		<member name="xfade_time" type="float" setter="set_xfade_time" getter="get_xfade_time" default="0.0">
 			Cross-fading time (in seconds) between each animation connected to the inputs.

doc/classes/CPUParticles2D.xml

@@ -57,7 +57,7 @@
 			<param index="0" name="param" type="int" enum="CPUParticles2D.Parameter" />
 			<param index="1" name="curve" type="Curve" />
 			<description>
-				Sets the [Curve] of the parameter specified by [enum Parameter].
+				Sets the [Curve] of the parameter specified by [enum Parameter]. This curve Should be a unit [Curve].
 			</description>
 		</method>
 		<method name="set_param_max">
@@ -90,7 +90,7 @@
 			Number of particles emitted in one emission cycle.
 		</member>
 		<member name="angle_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's rotation will be animated along this [Curve].
+			Each particle's rotation will be animated along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="angle_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum initial rotation applied to each particle, in degrees.
@@ -99,7 +99,7 @@
 			Minimum equivalent of [member angle_max].
 		</member>
 		<member name="angular_velocity_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's angular velocity will vary along this [Curve].
+			Each particle's angular velocity will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="angular_velocity_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum initial angular velocity (rotation speed) applied to each particle in [i]degrees[/i] per second.
@@ -108,7 +108,7 @@
 			Minimum equivalent of [member angular_velocity_max].
 		</member>
 		<member name="anim_offset_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's animation offset will vary along this [Curve].
+			Each particle's animation offset will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="anim_offset_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum animation offset that corresponds to frame index in the texture. [code]0[/code] is the first frame, [code]1[/code] is the last one. See [member CanvasItemMaterial.particles_animation].
@@ -117,7 +117,7 @@
 			Minimum equivalent of [member anim_offset_max].
 		</member>
 		<member name="anim_speed_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's animation speed will vary along this [Curve].
+			Each particle's animation speed will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="anim_speed_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum particle animation speed. Animation speed of [code]1[/code] means that the particles will make full [code]0[/code] to [code]1[/code] offset cycle during lifetime, [code]2[/code] means [code]2[/code] cycles etc.
@@ -136,7 +136,7 @@
 			Each particle's color will vary along this [Gradient] (multiplied with [member color]).
 		</member>
 		<member name="damping_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Damping will vary along this [Curve].
+			Damping will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="damping_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			The maximum rate at which particles lose velocity. For example value of [code]100[/code] means that the particle will go from [code]100[/code] velocity to [code]0[/code] in [code]1[/code] second.
@@ -184,7 +184,7 @@
 			Gravity applied to every particle.
 		</member>
 		<member name="hue_variation_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's hue will vary along this [Curve].
+			Each particle's hue will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="hue_variation_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum initial hue variation applied to each particle. It will shift the particle color's hue.
@@ -205,7 +205,7 @@
 			Particle lifetime randomness ratio.
 		</member>
 		<member name="linear_accel_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's linear acceleration will vary along this [Curve].
+			Each particle's linear acceleration will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="linear_accel_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum linear acceleration applied to each particle in the direction of motion.
@@ -220,7 +220,7 @@
 			If [code]true[/code], only one emission cycle occurs. If set [code]true[/code] during a cycle, emission will stop at the cycle's end.
 		</member>
 		<member name="orbit_velocity_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's orbital velocity will vary along this [Curve].
+			Each particle's orbital velocity will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="orbit_velocity_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum orbital velocity applied to each particle. Makes the particles circle around origin. Specified in number of full rotations around origin per second.
@@ -235,7 +235,7 @@
 			Particle system starts as if it had already run for this many seconds.
 		</member>
 		<member name="radial_accel_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's radial acceleration will vary along this [Curve].
+			Each particle's radial acceleration will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="radial_accel_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum radial acceleration applied to each particle. Makes particle accelerate away from the origin or towards it if negative.
@@ -247,7 +247,7 @@
 			Emission lifetime randomness ratio.
 		</member>
 		<member name="scale_amount_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's scale will vary along this [Curve].
+			Each particle's scale will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="scale_amount_max" type="float" setter="set_param_max" getter="get_param_max" default="1.0">
 			Maximum initial scale applied to each particle.
@@ -256,11 +256,11 @@
 			Minimum equivalent of [member scale_amount_max].
 		</member>
 		<member name="scale_curve_x" type="Curve" setter="set_scale_curve_x" getter="get_scale_curve_x">
-			Each particle's horizontal scale will vary along this [Curve].
+			Each particle's horizontal scale will vary along this [Curve]. Should be a unit [Curve].
 			[member split_scale] must be enabled.
 		</member>
 		<member name="scale_curve_y" type="Curve" setter="set_scale_curve_y" getter="get_scale_curve_y">
-			Each particle's vertical scale will vary along this [Curve].
+			Each particle's vertical scale will vary along this [Curve]. Should be a unit [Curve].
 			[member split_scale] must be enabled.
 		</member>
 		<member name="speed_scale" type="float" setter="set_speed_scale" getter="get_speed_scale" default="1.0">
@@ -273,7 +273,7 @@
 			Each particle's initial direction range from [code]+spread[/code] to [code]-spread[/code] degrees.
 		</member>
 		<member name="tangential_accel_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's tangential acceleration will vary along this [Curve].
+			Each particle's tangential acceleration will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="tangential_accel_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum tangential acceleration applied to each particle. Tangential acceleration is perpendicular to the particle's velocity giving the particles a swirling motion.

doc/classes/CPUParticles3D.xml

@@ -57,7 +57,7 @@
 			<param index="0" name="param" type="int" enum="CPUParticles3D.Parameter" />
 			<param index="1" name="curve" type="Curve" />
 			<description>
-				Sets the [Curve] of the parameter specified by [enum Parameter].
+				Sets the [Curve] of the parameter specified by [enum Parameter]. Should be a unit [Curve].
 			</description>
 		</method>
 		<method name="set_param_max">
@@ -90,7 +90,7 @@
 			Number of particles emitted in one emission cycle.
 		</member>
 		<member name="angle_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's rotation will be animated along this [Curve].
+			Each particle's rotation will be animated along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="angle_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum angle.
@@ -99,7 +99,7 @@
 			Minimum angle.
 		</member>
 		<member name="angular_velocity_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's angular velocity (rotation speed) will vary along this [Curve] over its lifetime.
+			Each particle's angular velocity (rotation speed) will vary along this [Curve] over its lifetime. Should be a unit [Curve].
 		</member>
 		<member name="angular_velocity_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum initial angular velocity (rotation speed) applied to each particle in [i]degrees[/i] per second.
@@ -108,7 +108,7 @@
 			Minimum initial angular velocity (rotation speed) applied to each particle in [i]degrees[/i] per second.
 		</member>
 		<member name="anim_offset_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's animation offset will vary along this [Curve].
+			Each particle's animation offset will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="anim_offset_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum animation offset.
@@ -117,7 +117,7 @@
 			Minimum animation offset.
 		</member>
 		<member name="anim_speed_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's animation speed will vary along this [Curve].
+			Each particle's animation speed will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="anim_speed_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum particle animation speed.
@@ -138,7 +138,7 @@
 			[b]Note:[/b] [member color_ramp] multiplies the particle mesh's vertex colors. To have a visible effect on a [BaseMaterial3D], [member BaseMaterial3D.vertex_color_use_as_albedo] [i]must[/i] be [code]true[/code]. For a [ShaderMaterial], [code]ALBEDO *= COLOR.rgb;[/code] must be inserted in the shader's [code]fragment()[/code] function. Otherwise, [member color_ramp] will have no visible effect.
 		</member>
 		<member name="damping_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Damping will vary along this [Curve].
+			Damping will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="damping_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum damping.
@@ -206,7 +206,7 @@
 			Gravity applied to every particle.
 		</member>
 		<member name="hue_variation_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's hue will vary along this [Curve].
+			Each particle's hue will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="hue_variation_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum hue variation.
@@ -227,7 +227,7 @@
 			Particle lifetime randomness ratio.
 		</member>
 		<member name="linear_accel_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's linear acceleration will vary along this [Curve].
+			Each particle's linear acceleration will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="linear_accel_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum linear acceleration.
@@ -245,7 +245,7 @@
 			If [code]true[/code], only one emission cycle occurs. If set [code]true[/code] during a cycle, emission will stop at the cycle's end.
 		</member>
 		<member name="orbit_velocity_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's orbital velocity will vary along this [Curve].
+			Each particle's orbital velocity will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="orbit_velocity_max" type="float" setter="set_param_max" getter="get_param_max">
 			Maximum orbit velocity.
@@ -266,7 +266,7 @@
 			Particle system starts as if it had already run for this many seconds.
 		</member>
 		<member name="radial_accel_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's radial acceleration will vary along this [Curve].
+			Each particle's radial acceleration will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="radial_accel_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum radial acceleration.
@@ -278,7 +278,7 @@
 			Emission lifetime randomness ratio.
 		</member>
 		<member name="scale_amount_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's scale will vary along this [Curve].
+			Each particle's scale will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="scale_amount_max" type="float" setter="set_param_max" getter="get_param_max" default="1.0">
 			Maximum scale.
@@ -305,7 +305,7 @@
 			Each particle's initial direction range from [code]+spread[/code] to [code]-spread[/code] degrees. Applied to X/Z plane and Y/Z planes.
 		</member>
 		<member name="tangential_accel_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
-			Each particle's tangential acceleration will vary along this [Curve].
+			Each particle's tangential acceleration will vary along this [Curve]. Should be a unit [Curve].
 		</member>
 		<member name="tangential_accel_max" type="float" setter="set_param_max" getter="get_param_max" default="0.0">
 			Maximum tangent acceleration.