Merge pull request #83721 from Faless/mbedtls/2.18.5

mbedTLS: Update to version 2.18.5

thirdparty/mbedtls/include/mbedtls/aesni.h

@@ -36,16 +36,20 @@
 #define MBEDTLS_AESNI_AES      0x02000000u
 #define MBEDTLS_AESNI_CLMUL    0x00000002u
 
-/* Can we do AESNI with inline assembly?
- * (Only implemented with gas syntax, only for 64-bit.)
- */
-#if defined(MBEDTLS_HAVE_ASM) && defined(__GNUC__) && \
-    (defined(__amd64__) || defined(__x86_64__))   &&  \
-    !defined(MBEDTLS_HAVE_X86_64)
+#if !defined(MBEDTLS_HAVE_X86_64) && \
+    (defined(__amd64__) || defined(__x86_64__) || \
+    defined(_M_X64) || defined(_M_AMD64)) && \
+    !defined(_M_ARM64EC)
 #define MBEDTLS_HAVE_X86_64
 #endif
 
-#if defined(MBEDTLS_AESNI_C)
+#if !defined(MBEDTLS_HAVE_X86) && \
+    (defined(__i386__) || defined(_M_IX86))
+#define MBEDTLS_HAVE_X86
+#endif
+
+#if defined(MBEDTLS_AESNI_C) && \
+    (defined(MBEDTLS_HAVE_X86_64) || defined(MBEDTLS_HAVE_X86))
 
 /* Can we do AESNI with intrinsics?
  * (Only implemented with certain compilers, only for certain targets.)
@@ -54,10 +58,9 @@
  *       macros that may change in future releases.
  */
 #undef MBEDTLS_AESNI_HAVE_INTRINSICS
-#if defined(_MSC_VER) && (defined(_M_AMD64) || defined(_M_IX86))
+#if defined(_MSC_VER)
 /* Visual Studio supports AESNI intrinsics since VS 2008 SP1. We only support
- * VS 2013 and up for other reasons anyway, so no need to check the version.
- * Only supported on x64 and x86. */
+ * VS 2013 and up for other reasons anyway, so no need to check the version. */
 #define MBEDTLS_AESNI_HAVE_INTRINSICS
 #endif
 /* GCC-like compilers: currently, we only support intrinsics if the requisite
@@ -73,7 +76,11 @@
  * favor the assembly-based implementation if it's available. We intend to
  * revise this in a later release of Mbed TLS 3.x. In the long run, we will
  * likely remove the assembly implementation. */
-#if defined(MBEDTLS_HAVE_X86_64)
+#if defined(MBEDTLS_HAVE_ASM) && \
+    defined(__GNUC__) && defined(MBEDTLS_HAVE_X86_64)
+/* Can we do AESNI with inline assembly?
+ * (Only implemented with gas syntax, only for 64-bit.)
+ */
 #define MBEDTLS_AESNI_HAVE_CODE 1 // via assembly
 #elif defined(MBEDTLS_AESNI_HAVE_INTRINSICS)
 #define MBEDTLS_AESNI_HAVE_CODE 2 // via intrinsics
@@ -169,6 +176,6 @@ int mbedtls_aesni_setkey_enc(unsigned char *rk,
 #endif
 
 #endif /* MBEDTLS_AESNI_HAVE_CODE */
-#endif  /* MBEDTLS_AESNI_C */
+#endif /* MBEDTLS_AESNI_C && (MBEDTLS_HAVE_X86_64 || MBEDTLS_HAVE_X86) */
 
 #endif /* MBEDTLS_AESNI_H */

thirdparty/mbedtls/include/mbedtls/asn1write.h

@@ -158,6 +158,27 @@ int mbedtls_asn1_write_algorithm_identifier(unsigned char **p,
                                             const char *oid, size_t oid_len,
                                             size_t par_len);
 
+/**
+ * \brief           Write an AlgorithmIdentifier sequence in ASN.1 format.
+ *
+ * \note            This function works backwards in data buffer.
+ *
+ * \param p         The reference to the current position pointer.
+ * \param start     The start of the buffer, for bounds-checking.
+ * \param oid       The OID of the algorithm to write.
+ * \param oid_len   The length of the algorithm's OID.
+ * \param par_len   The length of the parameters, which must be already written.
+ * \param has_par   If there are any parameters. If 0, par_len must be 0. If 1
+ *                  and \p par_len is 0, NULL parameters are added.
+ *
+ * \return          The number of bytes written to \p p on success.
+ * \return          A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure.
+ */
+int mbedtls_asn1_write_algorithm_identifier_ext(unsigned char **p,
+                                                unsigned char *start,
+                                                const char *oid, size_t oid_len,
+                                                size_t par_len, int has_par);
+
 /**
  * \brief           Write a boolean tag (#MBEDTLS_ASN1_BOOLEAN) and value
  *                  in ASN.1 format.

thirdparty/mbedtls/include/mbedtls/check_config.h

@@ -35,7 +35,7 @@
  */
 #include <limits.h>
 #if CHAR_BIT != 8
-#error "mbed TLS requires a platform with 8-bit chars"
+#error "Mbed TLS requires a platform with 8-bit chars"
 #endif
 
 #if defined(_WIN32)

thirdparty/mbedtls/include/mbedtls/cipher.h

@@ -446,10 +446,29 @@ void mbedtls_cipher_free(mbedtls_cipher_context_t *ctx);
 
 
 /**
- * \brief               This function initializes a cipher context for
+ * \brief               This function prepares a cipher context for
  *                      use with the given cipher primitive.
  *
- * \param ctx           The context to initialize. This must be initialized.
+ * \warning             In CBC mode, if mbedtls_cipher_set_padding_mode() is not called:
+ *                      - If MBEDTLS_CIPHER_PADDING_PKCS7 is enabled, the
+ *                      context will use PKCS7 padding.
+ *                      - Otherwise the context uses no padding and the input
+ *                      must be a whole number of blocks.
+ *
+ * \note                After calling this function, you should call
+ *                      mbedtls_cipher_setkey() and, if the mode uses padding,
+ *                      mbedtls_cipher_set_padding_mode(), then for each
+ *                      message to encrypt or decrypt with this key, either:
+ *                      - mbedtls_cipher_crypt() for one-shot processing with
+ *                      non-AEAD modes;
+ *                      - mbedtls_cipher_auth_encrypt_ext() or
+ *                      mbedtls_cipher_auth_decrypt_ext() for one-shot
+ *                      processing with AEAD modes or NIST_KW;
+ *                      - for multi-part processing, see the documentation of
+ *                      mbedtls_cipher_reset().
+ *
+ * \param ctx           The context to prepare. This must be initialized by
+ *                      a call to mbedtls_cipher_init() first.
  * \param cipher_info   The cipher to use.
  *
  * \return              \c 0 on success.
@@ -663,8 +682,6 @@ int mbedtls_cipher_setkey(mbedtls_cipher_context_t *ctx,
  * \brief               This function sets the padding mode, for cipher modes
  *                      that use padding.
  *
- *                      The default passing mode is PKCS7 padding.
- *
  * \param ctx           The generic cipher context. This must be initialized and
  *                      bound to a cipher information structure.
  * \param mode          The padding mode.
@@ -704,7 +721,29 @@ int mbedtls_cipher_set_iv(mbedtls_cipher_context_t *ctx,
 /**
  * \brief         This function resets the cipher state.
  *
- * \param ctx     The generic cipher context. This must be initialized.
+ * \note          With non-AEAD ciphers, the order of calls for each message
+ *                is as follows:
+ *                1. mbedtls_cipher_set_iv() if the mode uses an IV/nonce.
+ *                2. mbedtls_cipher_reset()
+ *                3. mbedtls_cipher_update() one or more times
+ *                4. mbedtls_cipher_finish()
+ *                .
+ *                This sequence can be repeated to encrypt or decrypt multiple
+ *                messages with the same key.
+ *
+ * \note          With AEAD ciphers, the order of calls for each message
+ *                is as follows:
+ *                1. mbedtls_cipher_set_iv() if the mode uses an IV/nonce.
+ *                2. mbedtls_cipher_reset()
+ *                3. mbedtls_cipher_update_ad()
+ *                4. mbedtls_cipher_update() one or more times
+ *                5. mbedtls_cipher_check_tag() (for decryption) or
+ *                mbedtls_cipher_write_tag() (for encryption).
+ *                .
+ *                This sequence can be repeated to encrypt or decrypt multiple
+ *                messages with the same key.
+ *
+ * \param ctx     The generic cipher context. This must be bound to a key.
  *
  * \return        \c 0 on success.
  * \return        #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on

thirdparty/mbedtls/include/mbedtls/cmac.h

@@ -45,7 +45,11 @@ extern "C" {
 #define MBEDTLS_AES_BLOCK_SIZE          16
 #define MBEDTLS_DES3_BLOCK_SIZE         8
 
-#if defined(MBEDTLS_AES_C)
+
+/* Although the CMAC module does not support ARIA or CAMELLIA, we adjust the value of
+ * MBEDTLS_CIPHER_BLKSIZE_MAX to reflect these ciphers.
+ * This is done to avoid confusion, given the general-purpose name of the macro. */
+#if defined(MBEDTLS_AES_C) || defined(MBEDTLS_ARIA_C) || defined(MBEDTLS_CAMELLIA_C)
 #define MBEDTLS_CIPHER_BLKSIZE_MAX      16  /**< The longest block used by CMAC is that of AES. */
 #else
 #define MBEDTLS_CIPHER_BLKSIZE_MAX      8   /**< The longest block used by CMAC is that of 3DES. */

thirdparty/mbedtls/include/mbedtls/compat-1.3.h

@@ -1,7 +1,7 @@
 /**
  * \file compat-1.3.h
  *
- * \brief Compatibility definitions for using mbed TLS with client code written
+ * \brief Compatibility definitions for using Mbed TLS with client code written
  *  for the PolarSSL naming conventions.
  *
  * \deprecated Use the new names directly instead